scholarly journals Electrochemical Corrosion Characteristics of High Strength Low Alloy Domex 700 Steel After Mechanical Surface Treatment in Chloride Environment

2017 ◽  
Vol 61 (5) ◽  
pp. 162-168 ◽  
Author(s):  
K. Borko ◽  
F. Pastorek ◽  
B. Hadzima
Keyword(s):  
Corrosion Resistance ◽  
Surface Treatment ◽  
Shot Peening ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
High Strength ◽  
Fatigue Properties ◽  
Electrochemical Tests ◽  
Mechanical Surface Treatment ◽  
Mechanical Surface

Abstract Nowadays a large number of mechanical surface treatments of constructions materials is used in industry, mainly focusing on steel surface treatment. The aim of this study was to evaluate the effects of mechanical surface pre-treatment (grinding and shot peening) on corrosion resistance of high strength low alloy Domex 700 steel. Suitable mechanical surface treatment can by used for surface homogenization (eg. grinding) or for improvement of mechanical, strength and fatigue properties (shot peening). 0,1M NaCl solution of ambient temperature was used as an environment for electrochemical tests. Evaluation of the mechanical surface treatment effect on corrosion resistance of Domex 700 steel surface was realized by electrochemical tests: potentiodynamic polarization tests (using Tafel analysis) and electrochemical impedance spectroscopy (using equivalent circuit). From the obtained results it is possible to conclude, that the process of mechanical surface treatment by shot peening at choosen conditions has negative effect on corrosion resistance of Domex 700 steel.

scholarly journals Fatigue Strength Enhancement of Butt Welds by Means of Shot Peening and Clean Blasting

Metals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 744 ◽  
Author(s):  
Jonas Hensel ◽  
Hamdollah Eslami ◽  
Thomas Nitschke-Pagel ◽  
Klaus Dilger
Keyword(s):  
Aluminum Alloy ◽  
Fatigue Strength ◽  
Surface Treatment ◽  
Shot Peening ◽  
Surface Preparation ◽  
High Strength ◽  
Butt Welds ◽  
Strength Enhancement ◽  
Lack Of Control ◽  
Mechanical Surface

Shot peening is a mechanical surface treatment to improve the fatigue strength of metallic components. Similarities exist between regular shot peening and conventional industrial clean blasting. However, the main difference between these two processes is the peening media used and the lack of control and documentation of peening parameters. The clean blasting process is not yet qualified to optimize fatigue enhancement, although it holds a similar potential to regular shot peening. Clean blasting is frequently applied to welded components, with the purpose of surface preparation for application of corrosion protection. This article presents the results of regular shot peened double V-groove (DV) butt welds made from construction steels S355N and S960QL, as well as the high strength aluminum alloy Al-6082. The peening parameters are varied widely. Furthermore, the effect of coverage and intensity is investigated to test the robustness of the peening processes. The data is completed with industrially clean blasted welds, representing typical workshop conditions. The overall objective of this work is to derive minimum peening parameters that still allow significant fatigue strength benefits. The presented data show a high robustness of the fatigue results to peening parameters.

scholarly journals Effect of combined surface treatment on quality and electrochemical corrosion properties of manganese phosphate on hsla steel domex 700

2018 ◽  
Vol 62 (2) ◽  
pp. 45-53 ◽  
Author(s):  
Kamil Borko ◽  
F. Pastorek ◽  
Jacková M. Neslušan ◽  
S. Fintová ◽  
B. Hadzima
Keyword(s):  
Corrosion Resistance ◽  
Surface Treatment ◽  
Electrochemical Impedance ◽  
Hsla Steel ◽  
Electrochemical Corrosion ◽  
High Strength Steels ◽  
High Strength ◽  
Corrosion Properties ◽  
Manganese Phosphate ◽  
Pre Treatment

Abstract The actual industrial trend is focused on weight reduction of constructions while preserving strength properties. For this purpose, conventional steel are replaced by high strength steels.. The aim of this study was to evaluate the effects of mechanical surface pre-treatment on corrosion resistance of high strength low alloy steel Domex 700 before and after surface treatment by manganese phosphating. Tested environment was 0,1M NaCl solution. Evaluation of mechanical pre-treatment and phosphating effects on corrosion resistance was realized by electrochemical measurements: potentiodynamic polarization measurements (Tafel analysis) and electrochemical impedance spectroscopy (equivalent circuits). From resulsts it is possible to conclude, that creation of manganese phosphate layer on ground and shot peened steel surface significantly increases the corrosion resistance of Domex 700 steel.

Influence of Anodic Oxidation on the Polarization Resistance of Ti6Al4V Alloy after Shot Peening

2014 ◽  
Vol 811 ◽  
pp. 59-62
Author(s):  
Filip Pastorek ◽  
Branislav Hadzima ◽  
Stanislava Fintová ◽  
Mansour Mhaede
Keyword(s):  
Corrosion Resistance ◽  
Surface Treatment ◽  
Anodic Oxidation ◽  
Shot Peening ◽  
Electrochemical Impedance ◽  
Base Material ◽  
Ti6al4v Alloy ◽  
Corrosion Properties ◽  
Almen Intensity ◽  
Anodic Oxidation Process

Ti6Al4V titanium alloy is widely used for industrial and medical applications. Several techniques of surface treatment are used to improve their mechanical, fatigue or corrosion properties like shot peening or anodic oxidation. The effect of these techniques combination on corrosion resistance of the base material was examined in this study. For this purpose, electrochemical impedance spectroscopy tests were performed in 0.1M NaCl solution. Shot peening was carried out using ceramic balls Z850 (Φ 850 μm) at the Almen intensity of 0.13 mmA. Anodic oxidation process was performed on ground and shot peened surface in 7% H2SO4 acid solution at constant used voltage of 65 V. Significant improvement of corrosion resistance by the surface treatment of Ti6Al4V alloy by shot peening with following anodic oxidation was observed however the improvement was lower when compared to surface treated only by anodic oxidation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

ALCOA 6061 COLD FINISHED BAR

Alloy Digest ◽  
1998 ◽  
Vol 47 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Resistance ◽  
High Strength ◽  
Wire Rod ◽  
Good Workability

Abstract Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

Sign in / Sign up

Export Citation Format

Share Document