Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment

2002 ◽  
Author(s):  
1998 ◽  
Vol 32 (6) ◽  
pp. 821-827 ◽  
Author(s):  
Brenda B. Ress ◽  
Philip P. Calvert ◽  
Charles A. Pettigrew ◽  
Morton A. Barlaz

2019 ◽  
Vol 79 (2) ◽  
pp. 314-322 ◽  
Author(s):  
F. Licciardello ◽  
R. Aiello ◽  
V. Alagna ◽  
M. Iovino ◽  
D. Ventura ◽  
...  

Abstract This study aims at defining a methodology to evaluate Ks reductions of gravel material constituting constructed wetland (CW) bed matrices. Several schemes and equations for the Lefranc's test were compared by using different gravel sizes and at multiple spatial scales. The falling-head test method was implemented by using two steel permeameters: one impervious (IMP) and one pervious (P) on one side. At laboratory scale, mean K values for a small size gravel (8–15 × 10−2 m) measured by the IMP and the P permeameters were equal to 19,466 m/d and 30,662 m/d, respectively. Mean Ks values for a big size gravel (10–25 × 10−2 m) measured by the IMP and the P permeameters were equal to 12,135 m/d and 20,866 m/d, respectively. Comparison of Ks values obtained by the two permeameters at laboratory scale as well as a sensitivity analysis and a calibration, lead to the modification of the standpipe equation, to evaluate also the temporal variation of the horizontal Ks. In particular, both permeameters allow the evaluation of the Ks decreasing after 4 years-operation and 1–1.5 years' operation of the plants at full scale (filled with the small size gravel) and at pilot scale (filled with the big size gravel), respectively.


2012 ◽  
Vol 19 (3) ◽  
pp. 347-358 ◽  
Author(s):  
Magdalena Vaverková ◽  
František Toman ◽  
Dana Adamcová ◽  
Jana Kotovicová

Study of the Biodegrability of Degradable/Biodegradable Plastic Material in a Controlled Composting EnvironmentThe objective of this study was to determine the degrability/biodegradability of disposable plastic bags available on the market that are labeled as degradable/biodegradable and those certified as compost. The investigated materials were obtained from chain stores in the Czech Republic and Poland. Seven kinds of bags (commercially available) were used in this study. One of them was a disposable bag made of HDPE and mixed with totally degradable plastic additive (TDPA additive). Another was a disposable made of polyethylene with the addition of pro-oxidant additive (d2w additive). One was labeled as 100% degradable within various periods of time, from three months up to three years, and four were certified as compostable. The test was carried out in a controlled composting environment. The biodisintegration degree of the obtained pieces was evaluated following a modified version of ČSN EN 14806 Norm "Packaging - Preliminary evaluation of the disintegration of the packaging materials under simulated composting conditions in a laboratory scale test" and a modified version of ČSN EN ISO 20200 "Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in laboratory-scale test" (ISO 20200:2004). The emphasis was put on determination whether the bags are degradable/biodegradable or not.


2009 ◽  
Vol 24 (3) ◽  
pp. 1245-1257 ◽  
Author(s):  
Jianjun Wang ◽  
Timothy C. Ovaert

Nanoindentation is a widely accepted test method for materials characterization. On account of the complexity of contact deformation behavior, design of parametric constitutive models and determination of the unknown parameters is challenging. To address the need for identification of mechanical properties of viscoelastic/plastic materials from nanoindentation data, a combined numerical finite element/optimization-based indentation modeling tool was developed, fully self-contained, and capable of running on a PC as a stand-alone executable program. The approach uses inverse engineering and formulates the material characterization task as an optimization problem. The model development consists of finite element formulation, viscoelastic/plastic material models, heuristic estimation to obtain initial solution boundaries, and a gradient-based optimization algorithm for fast convergence to extract mechanical properties from the test data. A four-parameter viscoelastic/plastic model is presented, then a simplified three-parameter model with more rapid convergence. The end result is a versatile tool for indentation simulation and mechanical property analysis.


Sign in / Sign up

Export Citation Format

Share Document