Steady State Strength of Sands in a Constant Volume Ring Shear Apparatus

2002 ◽  
Vol 25 (4) ◽  
pp. 10402
Author(s):  
L David Suits ◽  
TC Sheahan ◽  
VK Garga ◽  
J-A Infante Sedano
1988 ◽  
Vol 25 (1) ◽  
pp. 50-55 ◽  
Author(s):  
D. Negussey ◽  
W. K. D. Wijewickreme ◽  
Y. P. Vaid

The postulate that the constant-volume friction angle [Formula: see text] of a granular material is unique and a function of mineral composition is verified experimentally. Granular materials comprised of particles ranging from minerals to metals are tested in a ring shear apparatus. Test samples are subjected to large shear displacements until a constant lower bound friction angle [Formula: see text] is mobilized. Possible effects of confining pressure, initial packing density, gradation, and particle shape on the value of [Formula: see text] are investigated. Friction angles mobilized in drained shear at the instant of maximum contraction and in undrained shear at phase transformation and steady state are compared with [Formula: see text] values. The experimental results confirm a broader fundamental significance of [Formula: see text] as a material parameter in that it is a consistent minimum drained friction angle equal to friction angles mobilized at phase transformation and steady state in undrained shear. Key words: granular materials, sand, friction angles, constant volume, steady state, phase transformation state, ring shear test.


1996 ◽  
Vol 19 (1) ◽  
pp. 3 ◽  
Author(s):  
RC Chaney ◽  
K Demars ◽  
TD Stark ◽  
IA Contreras

Author(s):  
Hendy Setiawan ◽  
Kyoji Sassa ◽  
Kaoru Takara ◽  
Toyohiko Miyagi ◽  
Hiroshi Fukuoka ◽  
...  

2020 ◽  
Vol 91 (6) ◽  
pp. 064503
Author(s):  
Erik Spangenberg ◽  
Katja U. Heeschen ◽  
Ronny Giese ◽  
Judith M. Schicks

1999 ◽  
Vol 87 (5) ◽  
pp. 1813-1822 ◽  
Author(s):  
A. Gastaldelli ◽  
A. R. Coggan ◽  
R. R. Wolfe

The most common approach for estimating substrate rate of appearance (Ra) is use of the single-pool model first proposed by R. W. Steele, J. S. Wall, R. C. DeBodo, and N. Altszuler. ( Am. J. Physiol. 187: 15–24, 1956). To overcome the model error during highly non-steady-state conditions due to the assumption of a constant volume of distribution (V), two strategies have been proposed: 1) use of a variable tracer infusion rate to minimize tracer-to-tracee ratio (TTR) variations (fixed-volume approach) or 2) use of two tracers of the same substrate with one infused at a constant rate and the other at a variable rate (variable-volume approach or approach of T. Issekutz, R. Issekutz, and D. Elahi. Can. J. Physiol. Pharmacol. 52: 215–224, 1974). The goal of this study was to compare the results of these two strategies for the analysis of the kinetics of glycerol and glucose under the non-steady-state condition created by a constant infusion of epinephrine (50 ng ⋅ kg−1 ⋅ min−1) with the traditional approach of Steele et al., which uses a constant infusion and fixed volume. The results showed that for glucose and glycerol the estimates of Raobtained with the constant and the variable tracer infusion rate and the equation of Steele et al. were comparable. The variable tracer infusion approach was less sensitive to the choice of V in estimating Ra for glycerol and glucose, although the advantage of changing the tracer infusion rate was greater for glucose than for glycerol. The model of Issekutz et al. showed instability when the ratio TTR1/TTR2approaches a constant value, and the model is more sensitive to measurement error than the constant-volume model for glucose and glycerol. We conclude that the one-tracer constant-infusion technique is sufficient in most cases for glycerol, whereas the one-tracer variable-infusion technique is preferable for glucose. Reasonable values for glucose Ra can be obtained with the constant-infusion technique if V = 145 ml/kg.


Sign in / Sign up

Export Citation Format

Share Document