An Experimental Investigation on the Mechanism of Contact Erosion in Levee Foundations Considering the Characteristics of Particle Shape and Flow Field

The present paper deals with the numerical and experimental investigation of the effect of return channel (RCH) dimensions of a centrifugal compressor stage on the aerodynamic performance. Three different return channel stages were investigated, two stages comprising three-dimensional (3D) return channel blades and one stage comprising two-dimensional (2D) RCH vanes. The analysis was performed regarding both the investigation of overall performance (stage efficiency, RCH total pressure loss coefficient) and detailed flow-field performance. For detailed experimental flow-field investigation at the stage exit, six circumferentially traversed three-hole probes were positioned downstream the return channel exit in order to get two-dimensional flow-field information. Additionally, static pressure wall measurements were taken at the hub and shroud pressure and suction side (SS) of the 2D and 3D return channel blades. The return channel system overall performance was calculated by measurements of the circumferentially averaged 1D flow field downstream the diffuser exit and downstream the stage exit. Dependent on the type of return channel blade, the numerical and experimental results show a significant effect on the flow field overall and detail performance. In general, satisfactory agreement between computational fluid dynamics (CFD)-prediction and test-rig measurements was achieved regarding overall and flow-field performance. In comparison with the measurements, the CFD-calculated stage performance (efficiency and pressure rise coefficient) of all the 3D-RCH stages was slightly overpredicted. Very good agreement between CFD and measurement results was found for the static pressure distribution on the RCH wall surfaces while small CFD-deviations occur in the measured flow angle at the stage exit, dependent on the turbulence model selected.

Download Full-text

Experimental Investigation of the Effect of the Probe Support Tail Structure on the Compressor Cascade Flow Field

International Journal of Turbo and Jet Engines ◽

10.1515/tjj-2016-0071 ◽

2019 ◽

Vol 36 (1) ◽

pp. 9-18

Author(s):

Honghui Xiang ◽

Ning Ge ◽

Jie Gao ◽

Rongfei Yang ◽

Minjie Hou

Keyword(s):

Experimental Investigation ◽

Flow Field ◽

Flow Condition ◽

Test Facility ◽

Axial Distance ◽

Compressor Cascade ◽

Inlet Flow ◽

Disturbance Intensity ◽

Cascade Flow ◽

Tail Structure

Abstract Aiming at resolving the problem of measuring probe blockage effect in the performance experiments of high loaded axial flow compressors, an experimental investigation of the probe support disturbance effect on the compressor cascade flow field was conducted on a transonic plane cascade test facility. The influence characteristics of the probe support tail structure on the cascade downstream flow field under different operation conditions were revealed through the detailed analysis of the test data. The results show that the aerodynamic coupling effect between the upstream probe support wake and the downstream cascade flow field is very intense. Some factors, i. e. inlet Mach number, probe support tail structure, circumferential installing position of probe, and axial distance from the probe support trailing edge to the downstream cascade, are found to have the most impact on the probe disturbance intensity. Under high speed inlet flow condition, changing probe support tail structure can’t inhibit probe support disturbance intensity effectively. Whereas under low speed inlet flow condition, compared with the cylindrical probe, the elliptic probe can inhibit probe support wake loss and reduce disturbance effects on the downstream cascade flow field.

Download Full-text