scholarly journals Computation of Temperature Distribution in the Rotor of an Induction Motor during Reactor Starting in Two Dimensional Rectangular Co-ordinates

Author(s):  
G Atefi ◽  
M A Abdous ◽  
A Ganjehkaviri ◽  
N Moalemi

The objective of this article is to derive an analytical solution for a two-dimensional temperature field in a hollow cylinder, which is subjected to a periodic boundary condition at the outer surface, while the inner surface is insulated. The material is assumed to be homogeneous and isotropic with time-independent thermal properties. Because of the time-dependent term in the boundary condition, Duhamel's theorem is used to solve the problem for a periodic boundary condition. The periodic boundary condition is decomposed using the Fourier series. This condition is simulated with harmonic oscillation; however, there are some differences with the real situation. To solve this problem, first of all the boundary condition is assumed to be steady. By applying the method of separation of variables, the temperature distribution in a hollow cylinder can be obtained. Then, the boundary condition is assumed to be transient. In both these cases, the solutions are separately calculated. By using Duhamel's theorem, the temperature distribution field in a hollow cylinder is obtained. The final result is plotted with respect to the Biot and Fourier numbers. There is good agreement between the results of the proposed method and those reported by others for this geometry under a simple harmonic boundary condition.


2010 ◽  
Vol 40 (5) ◽  
pp. 529-532 ◽  
Author(s):  
Naomi Hirayama ◽  
Akira Endo ◽  
Kazuhiro Fujita ◽  
Yasuhiro Hasegawa ◽  
Naomichi Hatano ◽  
...  

2010 ◽  
Vol 42 (1) ◽  
pp. 99-124 ◽  
Author(s):  
A.K. Shukla ◽  
A. Mondal ◽  
A. Upadhyaya

The present study compares the temperature distribution within cylindrical samples heated in microwave furnace with those achieved in radiatively-heated (conventional) furnace. Using a two-dimensional finite difference approach the thermal profiles were simulated for cylinders of varying radii (0.65, 6.5, and 65 cm) and physical properties. The influence of susceptor-assisted microwave heating was also modeled for the same. The simulation results reveal differences in the heating behavior of samples in microwaves. The efficacy of microwave heating depends on the sample size and its thermal conductivity.


2008 ◽  
Vol 57 (8) ◽  
pp. 4812
Author(s):  
Liu Dong ◽  
Wang Fei ◽  
Huang Qun-Xing ◽  
Yan Jian-Hua ◽  
Chi Yong ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document