Semi Active Seat Suspension System using Modified Intelligent Active Force Control

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
R. Rosli ◽  
Z. Mohamed ◽  
G. Priyandoko
Keyword(s):  
Force Control ◽  
Ride Comfort ◽  
Mr Damper ◽  
Suspension System ◽  
Main Function ◽  
Control Force ◽  
Active Force ◽  
Damping Force ◽  
Seat Suspension ◽  
Active Force Control

This paper presents a modified intelligent active force control (AFC) control strategy in a semi active seat suspension system. The main actuator studied in this research is the Magneto-rheological (MR) damper. Since a semi-active device like MR damper can only dissipate energy so a modified version of AFC controller is needed. The modified AFC controller main function is to determine the appropriate control force. A Heaviside Step Function (HSF) is used to ensure the MR damper produce the desired damping force according to the control force generated by AFC controller. The phenomenological Bouc-Wen is used to study the effectiveness of the new AFC controller taking into account the dynamic response of the damper. Sinusoidal signals simulated as vibration sources are applied to the seat suspension system to investigate the improvement of ride comfort as well as to ascertain the new AFC controller robustness. Comparison of body acceleration signals from the passive suspension with AFC controller semi active seat suspension system shows up to to 45% improvement to the occupant ride comfort under different vibration intensities.

Vibration Control of a Seat Suspension System Using Magnetorheological Damper

2009 ◽  
Author(s):  
H. Metered ◽  
P. Bonello ◽  
S. O. Oyadiji
Keyword(s):  
Control System ◽  
Active Control ◽  
Ride Comfort ◽  
Mr Damper ◽  
Suspension System ◽  
Magnetorheological Damper ◽  
Performance Criteria ◽  
Effective Control ◽  
Damping Force ◽  
Seat Suspension

Seat suspension system is critical to the ride comfort experience of a vehicle’s driver and passengers. The use of a magnetorheological (MR) damper in a seat suspension system has been shown to offer significant benefits in this regard. Most research on seat MR dampers has applied active control strategies to command the MR damper, which is an inherently semi-active device. This paper introduces a more suitable semi-active control strategy for an MR damper used in a seat suspension, enabling more effective control. The proposed control system comprises a system controller that computes the desired damping force using a sliding mode control algorithm, and a neural-based damper controller that provides a direct estimation of the command voltage that is required to track the desired damping force. The seat suspension system is approximated by base-excited single degree of freedom system. The proposed semi-active seat suspension is compared to a passive seat suspension for prescribed base displacements. These inputs are representative of the vibration of the sprung mass of a passive or semi-active quarter-vehicle suspension under bump or random-profile road disturbance. Control performance criteria such as seat travel distance and seat acceleration are evaluated in time and frequency domains, in order to quantify the effectiveness of proposed semi-active control system. The simulated results reveal that the use of semi-active control in the seat suspension provides a significant improvement in ride comfort.

Hardware-in-the-Loop Simulation for Active Force Control with Iterative Learning Applied to an Active Vehicle Suspension System

2013 ◽  
Vol 465-466 ◽  
pp. 801-805
Author(s):  
Rosmazi Rosli ◽  
Musa Mailah ◽  
Gigih Priyandoko
Keyword(s):  
Force Control ◽  
Control Method ◽  
Learning Algorithm ◽  
Suspension System ◽  
Iterative Learning ◽  
Practical Implementation ◽  
Hardware In The Loop ◽  
Active Force ◽  
Physical Test ◽  
Active Force Control

The paper focuses on the practical implementation of a novel control method to an automotive suspension system using active force control (AFC) with iterative learning algorithm (ILA) and proportional-integral-derivative (PID) control strategy. The overall control system to be known as AFC-IL scheme essentially comprises three feedback control loops to cater for a number of specific tasks, namely, the innermost loop for the force tracking of the pneumatic actuator using PI controller, intermediate loops applying AFC with ILA strategy for the compensation of the disturbances and the outermost loop using PID controller for the computation of the desired force. A number of experiments were carried out on a physical test rig with hardware-in-the-loop simulation (HILS) feature that fully incorporates the theoretical elements. The performance of the proposed control method was evaluated and benchmarked to examine the effectiveness of the system in suppressing the vibration effect of the suspension system. It was found that the experimental results demonstrate the superiority of the active suspension system with proposed AFC-IL scheme compared to the PID and passive counterparts.

scholarly journals Semi-Active Control of Vehicle Seat Suspension System with Magnetorheological Damper

2011 ◽  
Vol 2-3 ◽  
pp. 1067-1070
Author(s):  
Hai Jun Xing ◽  
Shao Pu Yang ◽  
Yong Jun Shen
Keyword(s):  
Active Control ◽  
Ride Comfort ◽  
Linear Quadratic Regulator ◽  
Suspension System ◽  
Magnetorheological Damper ◽  
Vehicle Body ◽  
Control Force ◽  
Linear Quadratic ◽  
Seat Suspension ◽  
Vehicle Seat

This research aims at the vibration control of vehicle seat suspension system. A three degree of freedom quarter vehicle model is used for semi-active control system in which a magnetorheological damper (MRD) is installed at the position between the vehicle body and the seat. A fully active linear quadratic regulator (LQR) control strategy is used to determine the optimized control force which is then matched by MRD to compute the semi-active control result. Computation result proves that semi-active control with MRD can alleviate the vehicle seat acceleration to improve ride comfort.

scholarly journals Parametric Analysis of Magnetorheological Strut for Semiactive Suspension System Using Taguchi Method

2018 ◽  
Vol 8 (4) ◽  
pp. 3218-3222
Author(s):  
R. N. Yerrawar ◽  
R. R. Arakerimath
Keyword(s):  
Ride Comfort ◽  
Process Development ◽  
Mr Damper ◽  
Active Suspension ◽  
Performance Measure ◽  
Suspension System ◽  
Magnetorheological Damper ◽  
Tire Pressure ◽  
Damping Force ◽  
Minimum Number

Magnetorheological (MR) strut is among the leading advanced applications of semi-active suspension systems. The damping force of MR damper is controlled by varying the viscosity of MR fluid. In this work, the viscosity of MR damper varies by changing the current from 0.5A to 0.7A. The design of experiments is taken into account in concert with the product/process development as one completely advanced tool. The parameters used for ride comfort optimization are sprung mass, spring stiffness, tire pressure, current, and cylinder material with two levels of each. Taguchi orthogonal array method is used to select the best results by parameter optimization with a minimum number of test runs. In this paper, from Taguchi L16 array and S/N ratio analysis, it is observed that the cylinder material with Al and CS for damper cylinder is a key parameter for performance measure of semi-active suspension system. From regression analysis, a linear mathematical model is developed for Al and CS as cylinder materials. The interaction of cylinder materials with all four parameters is plotted. The methodology implemented for measurement of acceleration as a ride comfort is as per IS 2631-1997. The more economical model of magnetorheological damper will motivate Indian auto industry to broader applications.

Sign in / Sign up

Export Citation Format

Share Document