scholarly journals A Highly Contiguous Genome for the Golden-Fronted Woodpecker (Melanerpes aurifrons) via Hybrid Oxford Nanopore and Short Read Assembly

2020 ◽  
Vol 10 (6) ◽  
pp. 1829-1836 ◽  
Author(s):  
Graham Wiley ◽  
Matthew J. Miller

Woodpeckers are found in nearly every part of the world and have been important for studies of biogeography, phylogeography, and macroecology. Woodpecker hybrid zones are often studied to understand the dynamics of introgression between bird species. Notably, woodpeckers are gaining attention for their enriched levels of transposable elements (TEs) relative to most other birds. This enrichment of TEs may have substantial effects on molecular evolution. However, comparative studies of woodpecker genomes are hindered by the fact that no high-contiguity genome exists for any woodpecker species. Using hybrid assembly methods combining long-read Oxford Nanopore and short-read Illumina sequencing data, we generated a highly contiguous genome assembly for the Golden-fronted Woodpecker (Melanerpes aurifrons). The final assembly is 1.31 Gb and comprises 441 contigs plus a full mitochondrial genome. Half of the assembly is represented by 28 contigs (contig L50), each of these contigs is at least 16 Mb in size (contig N50). High recovery (92.6%) of bird-specific BUSCO genes suggests our assembly is both relatively complete and relatively accurate. Over a quarter (25.8%) of the genome consists of repetitive elements, with 287 Mb (21.9%) of those elements assignable to the CR1 superfamily of transposable elements, the highest proportion of CR1 repeats reported for any bird genome to date. Our assembly should improve comparative studies of molecular evolution and genomics in woodpeckers and allies. Additionally, the sequencing and bioinformatic resources used to generate this assembly were relatively low-cost and should provide a direction for development of high-quality genomes for studies of animal biodiversity.

2020 ◽  
Author(s):  
Graham Wiley ◽  
Matthew J. Miller

AbstractBackgroundWoodpeckers are found in nearly every part of the world, absent only from Antarctica, Australasia, and Madagascar. Woodpeckers have been important for studies of biogeography, phylogeography, and macroecology. Woodpeckers hybrid zones are often studied to understand the dynamics of introgression between bird species. Notably, woodpeckers are gaining attention for their enriched levels of transposable elements (TEs) relative to most other birds. This enrichment of TEs may have substantial effects on woodpecker molecular evolution. The Golden-fronted Woodpecker (Melanerpes aurifrons) is a member of the largest radiation of New World woodpeckers. However, comparative studies of woodpecker genomes are hindered by the fact that no high-contiguity genome exists for any woodpecker species.FindingsUsing hybrid assembly methods that combine long-read Oxford Nanopore and short-read Illumina sequencing data, we generated a highly contiguous genome assembly for the Golden-fronted Woodpecker. The final assembly is 1.31 Gb and comprises 441 contigs plus a full mitochondrial genome. Half of the assembly is represented by 28 contigs (contig N50), each of these contigs is at least 16 Mb in size (contig L50). High recovery (92.6%) of bird-specific BUSCO genes suggests our assembly is both relatively complete and relatively accurate. Accuracy is also demonstrated by the recovery of a putatively error-free mitochondrial genome. Over a quarter (25.8%) of the genome consists of repetitive elements, with 287 Mb (21.9%) of those elements assignable to the CR1 superfamily of transposable elements, the highest proportion of CR1 repeats reported for any bird genome to date.ConclusionOur assembly provides a useful tool for comparative studies of molecular evolution and genomics in woodpeckers and allies, a group emerging as important for studies on the role that TEs may play in avian evolution. Additionally, the sequencing and bioinformatic resources used to generate this assembly were relatively low-cost and should provide a direction for the development of high-quality genomes for future studies of animal biodiversity.


2019 ◽  
Vol 8 (34) ◽  
Author(s):  
Natsuki Tomariguchi ◽  
Kentaro Miyazaki

Rubrobacter xylanophilus strain AA3-22, belonging to the phylum Actinobacteria, was isolated from nonvolcanic Arima Onsen (hot spring) in Japan. Here, we report the complete genome sequence of this organism, which was obtained by combining Oxford Nanopore long-read and Illumina short-read sequencing data.


Blood ◽  
2018 ◽  
Vol 132 (Supplement 1) ◽  
pp. 1847-1847 ◽  
Author(s):  
Adam Burns ◽  
David Robert Bruce ◽  
Pauline Robbe ◽  
Adele Timbs ◽  
Basile Stamatopoulos ◽  
...  

Abstract Introduction Chronic Lymphocytic Leukaemia (CLL) is the most prevalent leukaemia in the Western world and characterised by clinical heterogeneity. IgHV mutation status, mutations in the TP53 gene and deletions of the p-arm of chromosome 17 are currently used to predict an individual patient's response to therapy and give an indication as to their long-term prognosis. Current clinical guidelines recommend screening patients prior to initial, and any subsequent, treatment. Routine clinical laboratory practices for CLL involve three separate assays, each of which are time-consuming and require significant investment in equipment. Nanopore sequencing offers a rapid, low-cost alternative, generating a full prognostic dataset on a single platform. In addition, Nanopore sequencing also promises low failure rates on degraded material such as FFPE and excellent detection of structural variants due to long read length of sequencing. Importantly, Nanopore technology does not require expensive equipment, is low-maintenance and ideal for patient-near testing, making it an attractive DNA sequencing device for low-to-middle-income countries. Methods Eleven untreated CLL samples were selected for the analysis, harbouring both mutated (n=5) and unmutated (n=6) IgHV genes, seven TP53 mutations (five missense, one stop gain and one frameshift) and two del(17p) events. Primers were designed to amplify all exons of TP53, along with the IgHV locus, and each primer included universal tails for individual sample barcoding. The resulting PCR amplicons were prepared for sequencing using a ligation sequencing kit (SQK-LSK108, Oxford Nanopore Technologies, Oxford, UK). All IgHV libraries were pooled and sequenced on one R9.4 flowcell, with the TP53 libraries pooled and sequenced on a second R9.4 flowcell. Whole genome libraries were prepared from 400ng genomic DNA for each sample using a rapid sequencing kit (SQK-RAD004, Oxford Nanopore Technologies, Oxford, UK), and each sample sequenced on individual flowcells on a MinION mk1b instrument (Oxford Nanopore Technologies, Oxford, UK). We developed a bespoke bioinformatics pipeline to detect copy-number changes, TP53 mutations and IgHV mutation status from the Nanopore sequencing data. Results were compared to short-read sequencing data obtained earlier by targeted deep sequencing (MiSeq, Illumina Inc, San Diego, CA, USA) and whole genome sequencing (HiSeq 2500, Illumina Inc, San Diego CA, USA). Results Following basecalling and adaptor trimming, the raw data were submitted to the IMGT database. In the absence of error correction, it was possible to identify the correct VH family for each sample; however the germline homology was not sufficient to differentiate between IgHVmut and IgHVunmut CLL cases. Following bio-informatic error correction and consensus building, the percentage to germline homology was the same as that obtained from short-read sequencing and nanopore sequencing also called the same productive rearrangements in all cases. A total of 77 TP53 variants were identified, including 68 in non-coding regions, and three synonymous SNVs. The remaining 6 were predicted to be functional variants (eight missense and two stop-gains) and had all been identified in early MiSeq targeted sequencing. However, the frameshift mutation was not called by the analysis pipeline, although it is present in the aligned reads. Using the low-coverage WGS data, we were able to identify del(17p) events, of 19Mb and 20Mb length, in both patients with high confidence. Conclusions Here we demonstrate that characterization of the IgHV locus in CLL cases is possible using the MinION platform, provided sufficient downstream analysis, including error correction, is applied. Furthermore, somatic SNVs in TP53 can be identified, although similar to second generation sequencing, variant calling of small insertions and deletions is more problematic. Identification of del(17p) is possible from low-coverage WGS on the MinION and is inexpensive. Our data demonstrates that Nanopore sequencing can be a viable, patient-near, low-cost alternative to established screening methods, with the potential of diagnostic implementation in resource-poor regions of the world. Disclosures Schuh: Giles, Roche, Janssen, AbbVie: Honoraria.


GigaScience ◽  
2020 ◽  
Vol 9 (6) ◽  
Author(s):  
Lisa K Johnson ◽  
Ruta Sahasrabudhe ◽  
James Anthony Gill ◽  
Jennifer L Roach ◽  
Lutz Froenicke ◽  
...  

Abstract Background Whole-genome sequencing data from wild-caught individuals of closely related North American killifish species (Fundulus xenicus, Fundulus catenatus, Fundulus nottii, and Fundulus olivaceus) were obtained using long-read Oxford Nanopore Technology (ONT) PromethION and short-read Illumina platforms. Findings Draft de novo reference genome assemblies were generated using a combination of long and short sequencing reads. For each species, the PromethION platform was used to generate 30–45× sequence coverage, and the Illumina platform was used to generate 50–160× sequence coverage. Illumina-only assemblies were fragmented with high numbers of contigs, while ONT-only assemblies were error prone with low BUSCO scores. The highest N50 values, ranging from 0.4 to 2.7 Mb, were from assemblies generated using a combination of short- and long-read data. BUSCO scores were consistently >90% complete using the Eukaryota database. Conclusions High-quality genomes can be obtained from a combination of using short-read Illumina data to polish assemblies generated with long-read ONT data. Draft assemblies and raw sequencing data are available for public use. We encourage use and reuse of these data for assembly benchmarking and other analyses.


2019 ◽  
Author(s):  
Lolita Lecompte ◽  
Pierre Peterlongo ◽  
Dominique Lavenier ◽  
Claire Lemaitre

AbstractMotivationStudies on structural variants (SV) are expanding rapidly. As a result, and thanks to third generation sequencing technologies, the number of discovered SVs is increasing, especially in the human genome. At the same time, for several applications such as clinical diagnoses, it is important to genotype newly sequenced individuals on well defined and characterized SVs. Whereas several SV genotypers have been developed for short read data, there is a lack of such dedicated tool to assess whether known SVs are present or not in a new long read sequenced sample, such as the one produced by Pacific Biosciences or Oxford Nanopore Technologies.ResultsWe present a novel method to genotype known SVs from long read sequencing data. The method is based on the generation of a set of reference sequences that represent the two alleles of each structural variant. Long reads are aligned to these reference sequences. Alignments are then analyzed and filtered out to keep only informative ones, to quantify and estimate the presence of each SV allele and the allele frequencies. We provide an implementation of the method, SVJedi, to genotype insertions and deletions with long reads. The tool has been applied to both simulated and real human datasets and achieves high genotyping accuracy. We also demonstrate that SV genotyping is considerably improved with SVJedi compared to other approaches, namely SV discovery and short read SV genotyping approaches.Availabilityhttps://github.com/llecompte/[email protected]


2020 ◽  
Vol 9 (21) ◽  
Author(s):  
Kentaro Miyazaki ◽  
Apirak Wiseschart ◽  
Kusol Pootanakit ◽  
Kei Kitahara

ABSTRACT We isolated the novel strain Vibrio rotiferianus AM7 from the shell of an abalone. In this article, we report the complete genome sequence of this organism, which was obtained by combining Oxford Nanopore long-read and Illumina short-read sequencing data.


2020 ◽  
Vol 36 (17) ◽  
pp. 4568-4575
Author(s):  
Lolita Lecompte ◽  
Pierre Peterlongo ◽  
Dominique Lavenier ◽  
Claire Lemaitre

Abstract Motivation Studies on structural variants (SVs) are expanding rapidly. As a result, and thanks to third generation sequencing technologies, the number of discovered SVs is increasing, especially in the human genome. At the same time, for several applications such as clinical diagnoses, it is important to genotype newly sequenced individuals on well-defined and characterized SVs. Whereas several SV genotypers have been developed for short read data, there is a lack of such dedicated tool to assess whether known SVs are present or not in a new long read sequenced sample, such as the one produced by Pacific Biosciences or Oxford Nanopore Technologies. Results We present a novel method to genotype known SVs from long read sequencing data. The method is based on the generation of a set of representative allele sequences that represent the two alleles of each structural variant. Long reads are aligned to these allele sequences. Alignments are then analyzed and filtered out to keep only informative ones, to quantify and estimate the presence of each SV allele and the allele frequencies. We provide an implementation of the method, SVJedi, to genotype SVs with long reads. The tool has been applied to both simulated and real human datasets and achieves high genotyping accuracy. We show that SVJedi obtains better performances than other existing long read genotyping tools and we also demonstrate that SV genotyping is considerably improved with SVJedi compared to other approaches, namely SV discovery and short read SV genotyping approaches. Availability and implementation https://github.com/llecompte/SVJedi.git Supplementary information Supplementary data are available at Bioinformatics online.


2021 ◽  
Author(s):  
Marc-André Lemay ◽  
Jonas A. Sibbesen ◽  
Davoud Torkamaneh ◽  
Jérémie Hamel ◽  
Roger C. Levesque ◽  
...  

Background: Structural variant (SV) discovery based on short reads is challenging due to their complex signatures and tendency to occur in repeated regions. The increasing availability of long-read technologies has greatly facilitated SV discovery, however these technologies remain too costly to apply routinely to population-level studies. Here, we combined short-read and long-read sequencing technologies to provide a comprehensive population-scale assessment of structural variation in a panel of Canadian soybean cultivars. Results: We used Oxford Nanopore sequencing data (~12X mean coverage) for 17 samples to both benchmark SV calls made from the Illumina data and predict SVs that were subsequently genotyped in a population of 102 samples using Illumina data. Benchmarking results show that variants discovered using Oxford Nanopore can be accurately genotyped from the Illumina data. We first use the genotyped SVs for population structure analysis and show that results are comparable to those based on single-nucleotide variants. We observe that the population frequency and distribution within the genome of SVs are constrained by the location of genes. Gene Ontology and PFAM domain enrichment analyses also confirm previous reports that genes harboring high-frequency SVs are enriched for functions in defense response. Finally, we discover polymorphic transposable elements from the SVs and report evidence of the recent activity of a Stowaway MITE. Conclusions: Our results demonstrate that long-read and short-read sequencing technologies can be efficiently combined to enhance SV analysis in large populations, providing a reusable framework for their study in a wider range of samples and non-model species.


2019 ◽  
Vol 32 (12) ◽  
pp. 1559-1563 ◽  
Author(s):  
Chenming Cui ◽  
John H. Herlihy ◽  
Aureliano Bombarely ◽  
John M. McDowell ◽  
David C. Haak

Resolving complex plant pathogen genomes is important for identifying the genomic shifts associated with rapid adaptation to selective agents such as hosts and fungicides, yet assembling these genomes remains challenging and expensive. Phytophthora capsici is an important, globally distributed plant pathogen that exhibits widespread fungicide resistance and a broad host range. As with other pathogenic oomycetes, P. capsici has a complex life history and a complex genome. Here, we leverage Oxford Nanopore Technologies and existing short-read resources to rapidly generate a low-cost, improved assembly. We generated 10 Gbp from a single MinION flow cell resulting in >1.25 million reads with an N50 of 13 kb. The resulting assembly is 95.2 Mbp in 424 scaffolds with an N50 length of 313 kb. This assembly is approximately 30 Mbp bigger than the current reference genome of 64 Mbp. We confirmed this larger genome size using flow cytometry, with an estimated size of 110 Mbp. BUSCO analysis identified 97.4% complete orthologs (19.2% duplicated). Evolutionary analysis supports a recent whole-genome duplication in this group. Our work provides a blueprint for rapidly integrating benchtop long-read sequencing with existing short-read data, to dramatically improve assembly quality and integrity of complex genomes and offer novel insights into pathogen genome function and evolution.


Author(s):  
Xueyi Dong ◽  
Luyi Tian ◽  
Quentin Gouil ◽  
Hasaru Kariyawasam ◽  
Shian Su ◽  
...  

Application of Oxford Nanopore Technologies’ long-read sequencing platform to transcriptomic analysis is increasing in popularity. However, such analysis can be challenging due to small library sizes and high sequence error, which decreases quantification accuracy and reduces power for statistical testing. Here, we report the analysis of two nanopore sequencing RNA-seq datasets with the goal of obtaining gene-level and isoform-level differential expression information. A dataset of synthetic, spliced, spike-in RNAs (“sequins”) as well as a mouse neural stem cell dataset from samples with a null mutation of the epigenetic regulator Smchd1 were analysed using a mix of long-read specific tools for preprocessing together with established short-read RNA-seq methods. We used limma-voom to perform differential gene expression analysis, and the novel FLAMES pipeline to perform isoform identification and quantification, followed by DRIMSeq and limma-diffSplice (with stageR) to perform differential transcript usage analysis. We compared results from the sequins dataset to the ground truth, and results of the mouse dataset to a previous short-read study on equivalent samples. Overall, our work shows that transcriptomic analysis of long-read nanopore data using short-read software and methods that are already in wide use can yield meaningful results.


Sign in / Sign up

Export Citation Format

Share Document