Analisis Karakterisasi Teknologi Direct Sequence Spread Spectrum Dan Frequency Hopping Spread Spectrum

2019 ◽  
Vol 2 (2) ◽  
pp. 129-138
Author(s):  
Fawzan Galib Abdul Karim Bawahab ◽  
Elvan Yuniarti ◽  
Edi Kurniawan
Keyword(s):  
Spread Spectrum ◽  
Communication Systems ◽  
Multiple Access ◽  
Frequency Hopping ◽  
Direct Sequence Spread Spectrum ◽  
Direct Sequence ◽  
Frequency Hopping Spread Spectrum ◽  
Two Systems ◽  
The Difference

Abstrak. Pada penelitian ini, telah dilakukan analisa karakterisasi pada teknologi Direct Sequence Spread Spectrum dan Frequency Hopping Spread Spectrum, sebagai salah satu teknik multiple-access pada sistem komunikasi. Karakterisasi dilakukan untuk mencari bagaimana cara meningkatkan keoptimalan kedua sistem tersebut, dalam mengatasi masalah interferensi dengan sistem dan channel yang sama. Dan juga untuk menentukan veriabel apa yang mempengaruhi keoptimalan kedua sistem tersebut. Karakterisasi dilakukan dengan menentukan variabel-variabel yang mempengaruhi keoptimalan keduanya. Hasil dari karakterisasi, diketahui variabel-variabel yang mempengaruhi kemampuan sistem DSSS yaitu nilai frekuensi spreading (). Sedangkan untuk sistem FHSS yaitu nilai frekuensi spreading ( dan ) dan selisih antara frekuensi hopping data dengan frekuensi hopping interferensi . Kata Kunci: BER, DSSS, FHSS, Interference, Spread spectrum. Abstract. In this study, characterization of Direct Sequence Spread Spectrum and Frequency Hopping Spread Spectrum technologies have been done, as one of the multiple-access techniques in communication systems. Characterization is done to find out how to improve the ability of the two systems, in solving interference problems with the same system and channel. And also to determine what veriabel affects the ability of the two systems. Characterization is done by determining the variables that affect the ability of both. The results of the characterization, known variables that affect the ability of the DSSS system are the spreading frequency value (). As for the FHSS system, the spreading frequency value ( and ) and the difference between frequency hopping data with frequency hopping interference .

CDMA Modulation for Communication System Environment using Frequency Hopping Spread Spectrum

2020 ◽  
Vol 6 (1) ◽  
pp. EC-1-EC-13
Author(s):  
Imeldawaty Gultom ◽  
Keyword(s):  
Spread Spectrum ◽  
Communication System ◽  
Code Division Multiple Access ◽  
Multiple Access ◽  
Channel Model ◽  
Frequency Hopping ◽  
Direct Sequence Spread Spectrum ◽  
Direct Sequence ◽  
Frequency Hopping Spread Spectrum ◽  
Code Division Multiple

In this paper, an overall framework for a joint Special emphasis is placed on the communication segment of the sensing system at 85 GHz. Code division multiplexing using frequency hopping spread spectrum signals is implemented at 85 ghz to take advantage of reduced interference between ambient communication. The framework, which spans the entire chain of signal processing, mat lab is enabled, explained, and simulated using data networking. A template, able to scatter, fraud detection, including radio frequency-block and synchronization non-idealities are built up and analyzed. Also, the implementation of a channel model is into the Win Prop technology and embedded into the simulation of simu link. In the previous paper, they implemented the code division multiple access using a direct sequence spread spectrum at 77ghz for secure communication. Because of using 77ghz for the direct sequence spread spectrum, there will occur noise distortion and interference in the communication system. So that there will be poor system communication between transmitter and receiver. To overcome these problems, our paper explains the implementation of code division multiple access using frequency hopping spread spectrum for better and secure communications. By using this frequency-hopping spread spectrum technology, we can reduce the noise distortion and interference between the transmitter and the receiver. So that our system will be in proper condition to transmit the signals in the same range of frequency without any interference and distortion. FHSS systems can allow a higher aggregate bandwidth for coverage because FHSS provides more channels in the same range of frequencies. In accordance with the bit-error-rate, the module is assessed. By creating white Gaussian additive noise. The attribute is proven to reconcile the theoretical assumptions with the outcomes. By organizing a Rake-Receiver, the system is further boosted with structure configuration without any distortions.

scholarly journals Construction of Optimal Sets of Frequency Hopping Sequences

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Bin Wen
Keyword(s):  
Spread Spectrum ◽  
Frequency Hopping ◽  
Direct Sequence Spread Spectrum ◽  
Direct Sequence ◽  
Frequency Hopping Spread Spectrum ◽  
Frequency Hopping Sequences ◽  
Cdma Systems ◽  
Theoretic Characterization ◽  
Optimal Set

Frequency hopping spread spectrum and direct sequence spread spectrum are two main spread coding technologies. Frequency hopping sequences are needed in FH-CDMA systems. In this paper, a construction of optimal sets of frequency hopping sequences is presented. The construction is based on the set-theoretic characterization of an optimal set of FH sequences.

scholarly journals Performance evaluation and mathematical analysis of direct sequence and frequency hopping spread spectrum systems under wideband interference

2018 ◽  
Vol 4 (3) ◽  
pp. 180
Author(s):  
Fawzan Ghalib Abdul Karim Bawahab ◽  
Edi Kurniawan ◽  
Elvan Yuniarti ◽  
Bambang Widiyatmoko ◽  
Dwi Bayuwati
Keyword(s):  
Performance Evaluation ◽  
Mathematical Analysis ◽  
Spread Spectrum ◽  
Frequency Hopping ◽  
Direct Sequence Spread Spectrum ◽  
Direct Sequence ◽  
Frequency Hopping Spread Spectrum ◽  
Bit Error Ratio ◽  
Wideband Interference ◽  
Systems Simulation

This paper presents performance evaluation and comparison analysis of Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS) systems. The evaluation and analysis are done based on the systems performance against wideband interferences. The interferences are signals with similar spectrum characteristic to the transmitted signals of DSSS and FHSS systems. Bit Error Ratio (BER) is used as evaluation parameter to assess the performance of both systems. Simulation and mathematical analysis are performed to test and verify the performance of both systems. Mathematical analysis also verifies that increasing Spreading Frequency on certain conditions will reduce the BER. This research also points out that FHSS system has a better performance compared to DSSS system indicated by smaller BER.

Sign in / Sign up

Export Citation Format

Share Document