CDMA Modulation for Communication System Environment using Frequency Hopping Spread Spectrum

In this paper, an overall framework for a joint Special emphasis is placed on the communication segment of the sensing system at 85 GHz. Code division multiplexing using frequency hopping spread spectrum signals is implemented at 85 ghz to take advantage of reduced interference between ambient communication. The framework, which spans the entire chain of signal processing, mat lab is enabled, explained, and simulated using data networking. A template, able to scatter, fraud detection, including radio frequency-block and synchronization non-idealities are built up and analyzed. Also, the implementation of a channel model is into the Win Prop technology and embedded into the simulation of simu link. In the previous paper, they implemented the code division multiple access using a direct sequence spread spectrum at 77ghz for secure communication. Because of using 77ghz for the direct sequence spread spectrum, there will occur noise distortion and interference in the communication system. So that there will be poor system communication between transmitter and receiver. To overcome these problems, our paper explains the implementation of code division multiple access using frequency hopping spread spectrum for better and secure communications. By using this frequency-hopping spread spectrum technology, we can reduce the noise distortion and interference between the transmitter and the receiver. So that our system will be in proper condition to transmit the signals in the same range of frequency without any interference and distortion. FHSS systems can allow a higher aggregate bandwidth for coverage because FHSS provides more channels in the same range of frequencies. In accordance with the bit-error-rate, the module is assessed. By creating white Gaussian additive noise. The attribute is proven to reconcile the theoretical assumptions with the outcomes. By organizing a Rake-Receiver, the system is further boosted with structure configuration without any distortions.

Download Full-text

Research on Key Technologies in Multi-Robotic Spread Spectrum Communication System

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.756-759.2401 ◽

2013 ◽

Vol 756-759 ◽

pp. 2401-2405 ◽

Cited By ~ 1

Author(s):

Yun Hang Zhu ◽

Qiong Cai ◽

Xiu Liang Huang

Keyword(s):

Spread Spectrum ◽

Communication System ◽

Code Division Multiple Access ◽

Multiple Access ◽

Rapid Development ◽

Direct Sequence Spread Spectrum ◽

Robotic System ◽

Direct Sequence ◽

Walsh Code ◽

Code Division Multiple

It has become a hot research topic that to improve the coordination performance of multi-robotic system by communication. With rapid development of wireless communication and robot technologies, multi-robotic system based on spread-spectrum technology has become product of combining two technologies. Code Division Multiple Access (CDMA) technology is applied in multi-robotic communication system here. According to the modified m-Walsh sequence got by the way of analyzing the relation characteristic of Walsh-code and m-sequence, the best direct sequence spread spectrum (DSSS) PN code and the improved RAKE receiver scheme are proposed, which satisfied the requirements of real-time performance, reliability and confidentiality in multi-robotic communication system, and have great significance for the research of multi-robotic communication system.

Download Full-text

Analisis Karakterisasi Teknologi Direct Sequence Spread Spectrum Dan Frequency Hopping Spread Spectrum

Al-Fiziya: Journal of Materials Science, Geophysics, Instrumentation and Theoretical Physics ◽

10.15408/fiziya.v2i2.9513 ◽

2019 ◽

Vol 2 (2) ◽

pp. 129-138

Author(s):

Fawzan Galib Abdul Karim Bawahab ◽

Elvan Yuniarti ◽

Edi Kurniawan

Keyword(s):

Spread Spectrum ◽

Communication Systems ◽

Multiple Access ◽

Frequency Hopping ◽

Direct Sequence Spread Spectrum ◽

Direct Sequence ◽

Frequency Hopping Spread Spectrum ◽

Two Systems ◽

The Difference

Abstrak. Pada penelitian ini, telah dilakukan analisa karakterisasi pada teknologi Direct Sequence Spread Spectrum dan Frequency Hopping Spread Spectrum, sebagai salah satu teknik multiple-access pada sistem komunikasi. Karakterisasi dilakukan untuk mencari bagaimana cara meningkatkan keoptimalan kedua sistem tersebut, dalam mengatasi masalah interferensi dengan sistem dan channel yang sama. Dan juga untuk menentukan veriabel apa yang mempengaruhi keoptimalan kedua sistem tersebut. Karakterisasi dilakukan dengan menentukan variabel-variabel yang mempengaruhi keoptimalan keduanya. Hasil dari karakterisasi, diketahui variabel-variabel yang mempengaruhi kemampuan sistem DSSS yaitu nilai frekuensi spreading (). Sedangkan untuk sistem FHSS yaitu nilai frekuensi spreading ( dan ) dan selisih antara frekuensi hopping data dengan frekuensi hopping interferensi . Kata Kunci: BER, DSSS, FHSS, Interference, Spread spectrum. Abstract. In this study, characterization of Direct Sequence Spread Spectrum and Frequency Hopping Spread Spectrum technologies have been done, as one of the multiple-access techniques in communication systems. Characterization is done to find out how to improve the ability of the two systems, in solving interference problems with the same system and channel. And also to determine what veriabel affects the ability of the two systems. Characterization is done by determining the variables that affect the ability of both. The results of the characterization, known variables that affect the ability of the DSSS system are the spreading frequency value (). As for the FHSS system, the spreading frequency value ( and ) and the difference between frequency hopping data with frequency hopping interference .

Download Full-text

Quadrature Phase Shift Keying Direct Sequence-Spread Spectrum Code Division Multiple Access with Disparate Quadrature Chip and Data Rates

2006 Proceeding of the Thrity-Eighth Southeastern Symposium on System Theory ◽

10.1109/ssst.2006.1619113 ◽

2006 ◽

Cited By ~ 1

Author(s):

S.S. Agarwal ◽

D.W. Matolak

Keyword(s):

Spread Spectrum ◽

Code Division Multiple Access ◽

Multiple Access ◽

Direct Sequence Spread Spectrum ◽

Direct Sequence ◽

Phase Shift Keying ◽

Data Rates ◽

Quadrature Phase ◽

Shift Keying ◽

Code Division Multiple

Download Full-text

Direct-sequence spread-spectrum code-division-multiple-access cellular systems in Rayleigh fading and log-normal shadowing channel

ICC 91 International Conference on Communications Conference Record ◽

10.1109/icc.1991.162482 ◽

2002 ◽

Cited By ~ 13

Author(s):

W.P. Yung

Keyword(s):

Spread Spectrum ◽

Code Division Multiple Access ◽

Multiple Access ◽

Rayleigh Fading ◽

Direct Sequence Spread Spectrum ◽

Cellular Systems ◽

Direct Sequence ◽

Log Normal ◽

Code Division Multiple

Download Full-text

FPGA implementation of DS-CDMA Transmitter and Receiver

International Journal of Reconfigurable and Embedded Systems (IJRES) ◽

10.11591/ijres.v6.i3.pp179-185 ◽

2018 ◽

Vol 6 (3) ◽

pp. 179

Author(s):

Harinath Mandalapu ◽

B Murali Krishna

Keyword(s):

Spread Spectrum ◽

Code Division Multiple Access ◽

Multiple Access ◽

Original Data ◽

Direct Sequence Spread Spectrum ◽

Direct Sequence ◽

Frequency Channel ◽

Data Signal ◽

Code Division Multiple ◽

Code Division Multiplexing

Direct sequence spread Spectrum (DSSS) is also known as direct sequence code division multiplexing. In direct sequence spread spectrum the stream of information to be transmitted is divided into small pieces each of which is allocated across to a frequency channel across the spectrum. Data signal at the point of transmission is collaborated with a higher data-rate bit sequence (also called chipping code) that divides the data according to a spreading ratio. A redundant chipping code helps the signal resist interference and also enables the original data to be recovered if data bits are damaged during the transmitting. In this project direct sequence spread spectrum principle based code division multiple access (CDMA) transmitter and receiver is implemented on SPARTAN 3E FPGA. The Xilinx synthesis technology (XST) of Xilinx ISE tool used for synthesis of transmitter and receiver on FPGA Spartan 3E.

Download Full-text

Calculation of the bit error probability in a direct sequence spread spectrum system with code division multiple access

10.1109/its.1990.175613 ◽

2002 ◽

Cited By ~ 3

Author(s):

P.J.E. Jeszensky

Keyword(s):

Spread Spectrum ◽

Code Division Multiple Access ◽

Multiple Access ◽

Error Probability ◽

Direct Sequence Spread Spectrum ◽

Direct Sequence ◽

Bit Error Probability ◽

Code Division Multiple

Download Full-text

PEMBANGKITAN DATA ACAK TERSEBAR DIRECT SEQUENCE SPREAD SPECTRUM PADA LAJU DATA BERKECEPATAN RENDAH UNTUK APLIKASI TEKNOLOGI CODE DIVISION MULTIPLE ACCESS

SINERGI ◽

10.22441/sinergi.2017.3.005 ◽

2017 ◽

Vol 21 (3) ◽

pp. 187

Author(s):

Budi Herdiana ◽

Muhammad Aria ◽

Jana Utama

Keyword(s):

Spread Spectrum ◽

Code Division Multiple Access ◽

Multiple Access ◽

Direct Sequence Spread Spectrum ◽

Noise Generator ◽

Direct Sequence ◽

Pseudo Noise ◽

Code Division Multiple

Salah satu kelebihan utama sistem komunikasi Spread Spectrum adalah kemampuannya mengirimkan data informasi disertai kode-kode unik sehingga hanya perangkat penerima tertentu saya yang mampu mendeteksinya. Sangat banyak metode pembangkitan kode unik pada spread spectrum ini yang mana salah satunya adalah direct sequence. Penerapan metode ini banyak direalisasikan pada teknologi CDMA dikarenakan kesederhanaan rancangan dan relatif mudah dalam menganalisis karakteristik kerja sistemnya terutama bagian sebaran kode unik pada sebuah lebar pita transmisi radio. Sumber kode unik dalam penelitian ini berasal dari data acak yang dihasilkan oleh pembangkit derau semu atau pseudo noise generator melalui pengaturan panjang kodenya sebesar 16 dengan tingkat kestabilan frekuensi sistem pembangkit kode unik dan frekuensi pembawa masing-masing sebesar 15,020 kHz dan 499,9419 kHz dimana keduanya ini masing-masing menghasilkan nilai persen kesalahannya sebesar 0,0412 % dan 0,000049 % sehingga dampaknya masih cukup baik bagi metode ini apabila diimplementasikan pada teknologi CDMA khususnya diperuntukan untuk laju kecepatan data rendah.

Download Full-text