DETECTION OF THE DSSS SIGNAL WITH VARIABLE PN CODES USING THE ANN

- Direct sequence spread spectrum systems appeared and are used to protect the transmitted data DSSS Systems might be one of the solutions for reliable and secured communications. Also, it is one of the approaches used by signals for transmitting bandwidth larger compared to the satisfied frequency related to the original information. The communication systems of SS were vital to suppress interference, complicating the detection and processing of secure communications, the technology of spread spectrum (DSSS) has been initially created for military applications. In a traditional DSSS system, the PN code is the primary key to make the receiver recover the transmitted data. In this paper, by using the MATLAB R2020a is used to simulate the proposed system, it is considered that the transmitter sends data bits and wants to protect the sent data by making each bit send with a PN code consisting of 127 bits randomly without informing the receiver of that. here the artificial neural network (ANN) was used as a tool to find the PN code for each initial value of 7 flip-flops. so, the receiver could detect the transmitted data with BER =0.

A Method for Underwater Wireless Data Transmission in a Hydroacoustic Channel under NLOS Conditions

Wireless data transmission in the hydroacoustic channel under non-line-of-sight (NLOS) propagation conditions, for example, during a wreck penetration, is difficult to implement reliably. This is mostly due to the multipath propagation, which causes a reduction in the quality of data reception. Therefore, in this work an attempt has been made to develop a reliable method of wireless underwater communication test it under the NLOS conditions. In our method, we used multiple frequency-shift keying (MFSK) modulation, sending a single bit on two carriers, and diversity combining. The method was tested in laboratory conditions which simulated underwater signal propagation during the penetration of the wreck. The propagation conditions were investigated by determining the impulse responses at selected measurement points using the correlation method. Additionally, for comparison, the data transmission quality was determined by the bit error rate (BER) under the same conditions using direct sequence spread spectrum (DSSS) and binary phase shift keying (BPSK) modulation. The obtained results confirmed the usefulness of the application of the developed method for wireless data transmission in a hydroacoustic channel under NLOS conditions.

Linear Feedback Shift Register and its Applications in Digital System Design

In digital system design, the Linear Feedback Shift Register (LFSR) is the queen of logic functions, and the design engineers can use LFSR in both hardware (HW) or software (SW) implementation. In this paper, LFSR will be discussed in its HW implementation via Hardware description language. In addition, the application of LFSR in of pseudorandom number generator (PRNG), direct sequence spread spectrum (DSSS), cyclic redundancy check (CRC) is also given. Keywords-- Digital system design, System on chip, ASIC digital design, Linear feedback shift register