Dual-Band Microstrip-Line BPFs Using Tap-Coupling Resonators

2008 ◽  
Vol 128 (6) ◽  
pp. 878-884
Author(s):  
Nobuhiko Okuzaki ◽  
Yukihiro Shimakata ◽  
Mitsuyuki Yamauchi ◽  
Kouji Wada ◽  
Takashi Iwasaki
Keyword(s):  
Microstrip Line ◽  
Dual Band

A dual-band crossover using cross-shaped microstrip line for small and large band ratios

2017 ◽  
Vol 9 (8) ◽  
pp. 1629-1635 ◽  
Author(s):  
Idury Satya Krishna ◽  
Rusan Kumar Barik ◽  
S. S. Karthikeyan
Keyword(s):  
Insertion Loss ◽  
Matrix Method ◽  
Microstrip Line ◽  
Return Loss ◽  
Dual Band ◽  
Band Ratios ◽  
Form Design ◽  
Frequency Ratios ◽  
Novel Design ◽  
Large Frequency

A novel design of planar dual-band microstrip crossover operating at small and large frequency ratios is presented. These features of the proposed dual-band crossover are achieved by a cross-shaped transmission line. To obtain the dual-band characteristics, the required closed form design formulas are computed using the ABCD matrix method. Based on the design formulas, the realizable small and large band ratios are calculated as 1.65–2.14 and 4.1–8.76, respectively. To validate the computed band ratios, three examples of dual-band crossovers are presented. Finally, two prototypes of dual-band crossover working at smaller and larger frequency ratios are fabricated and tested. The fabricated dual-band crossovers exhibit good return loss and isolation of over 20 dB with minimal insertion loss.

scholarly journals A NEW ULTRA-WIDEBAND MICROSTRIP-LINE FED ANTENNA WITH 3.5/5.5GHZ DUAL BAND-NOTCH FUNCTION

2009 ◽  
Vol 7 ◽  
pp. 79-85 ◽  
Author(s):  
Jie Ma ◽  
Ying-Zeng Yin ◽  
Shi-Gang Zhou ◽  
Luyu Zhao
Keyword(s):  
Microstrip Line ◽  
Ultra Wideband ◽  
Dual Band

A COMPACT MICROSTRIP-LINE-FED SLOT ANTENNA WITH DUAL-BAND NOTCHED FOR WIMAX OPERATION

2010 ◽  
Vol 16 ◽  
pp. 13-23 ◽  
Author(s):  
Wen-Shan Chen ◽  
Bau-Yi Lee ◽  
Po-Yuan Chang
Keyword(s):  
Microstrip Line ◽  
Dual Band ◽  
Slot Antenna

Dual-band low-profile planar antenna for mobile communication application

2015 ◽  
Vol 9 (2) ◽  
pp. 447-452 ◽  
Author(s):  
Xi-Wang Dai ◽  
Tao Zhou ◽  
Bo-Ran Guan
Keyword(s):  
Frequency Band ◽  
Mobile Communication ◽  
High Frequency ◽  
Microstrip Line ◽  
Low Frequency ◽  
Dual Band ◽  
Planar Antenna ◽  
Frequency Resonance ◽  
Low Profile ◽  
High Frequency Resonance

A novel dual-band planar antenna with a low profile for mobile communication system is proposed in this paper. The antenna is composed of one shorted patch with two radiating notches for low frequency resonance and one square patch for high frequency resonance. The low profile is achieved via the shorting patch, which introduces the parallel electrical field between the reflector and antenna. A step-impedance microstrip line is used to feed the antenna. The coupling between the square patch and microstrip line cancels out the inductance of shorting probe, which increases the working bandwidth of proposed antenna. A prototype with a low profile of 0.0286λ is fabricated and measured. The antenna achieves dual impedance bandwidths of 1.6% for the low frequency band and 60% for the high frequency band, covering the frequency range 851–865 MHz and 1.97–3.65 GHz, respectively. The measured results show good agreements with the simulated ones.

A U-matched printed antenna for dual-band WiFi applications

2014 ◽  
Vol 7 (5) ◽  
pp. 551-556 ◽  
Author(s):  
Churng-Jou Tsai ◽  
Bo-Yuan Tsai
Keyword(s):  
High Frequency ◽  
Microstrip Line ◽  
Access Point ◽  
Wireless Access ◽  
Dual Band ◽  
Frequency Bandwidth ◽  
Printed Antenna ◽  
Directional Radiation ◽  
5 Ghz ◽  
And Control

In this paper, a novel and compact center-fed dual-band WiFi printed antenna is presented. This antenna is designed using two different arms which correspond to the oscillation points of the dual band, and uses parasitic capacitance and U-shaped microstrip line to match and control the necessary bandwidth. The measured frequency bandwidth of this antenna is 2.3–2.61 GHz (310 MHz, 12.7%) at 2 GHz, and the high-frequency bandwidth is 4.82–5.84 GHz (1020 MHz, 19.1%) at 5 GHz, which meets the requirements for applications in global WiFi communication. This PCB antenna is double-sided, long, and narrow; its size is 7 × 45.9 × 1 mm3; it can be applied to wireless access point; and it has a near-omni-directional radiation pattern. The design, analysis, and measured results of this proposed antenna will be presented.

scholarly journals A Hybrid of T-Dipole and Quasi-Yagi Antenna for Dual-band WLAN Access Point

2012 ◽  
Vol 2 (1-2) ◽  
Author(s):  
Son Xuat Ta ◽  
Ikmo Park ◽  
Chien Dao-Ngoc
Keyword(s):  
Microstrip Line ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Access Point ◽  
Local Area ◽  
Antenna Design ◽  
Dual Band ◽  
Area Network ◽  
Yagi Antenna ◽  
Peak Gain

In this paper, a hybrid of T-dipole and quasi-Yagi antenna is presented for using in dual-band Wireless Local Area Network (WLAN) access point. The antenna is made up of combination of T-dipole and quasi-Yagi antenna structures, which are distinctly designed to operate at 2.4 and 5.5 GHz frequency bands. A simply integrated balun that consists of a curved microstrip line and a circular slot to allow broadband characteristic is used to feed the antenna. The final antenna design presents measured bandwidths (RL ≤ − 10 dB) of 2.35 – 2.55 GHz and 4.30 – 6.56 GHz which cover completely the two bands of WLAN. Simulated and measured results of peak gain and radiation patterns in both E- and H-plane validate potential of the design.

Design of dual-band antenna for the ISM band using a backed microstrip line

2004 ◽  
Vol 41 (6) ◽  
pp. 457-460 ◽  
Author(s):  
Seok H. Choi ◽  
Jong K. Park ◽  
Sun K. Kim ◽  
Hak S. Kim
Keyword(s):  
Microstrip Line ◽  
Dual Band ◽  
Ism Band ◽  
Dual Band Antenna
Sign in / Sign up

Export Citation Format

Share Document