Rapid Refracturing Candidate Selection in Shale Reservoirs Using Drainage Volume and Instantaneous Recovery Ratio

Author(s):  
Changdong Yang ◽  
Xu Xue ◽  
Jixiang Huang ◽  
Akhil Datta-Gupta ◽  
Michael J. King
2017 ◽  
Vol 159 ◽  
pp. 8-24 ◽  
Author(s):  
Changdong Yang ◽  
Vishal Kumar Sharma ◽  
Akhil Datta-Gupta ◽  
Michael J. King

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Bin Yuan ◽  
Rouzbeh Ghanbarnezhad Moghanloo ◽  
Emad Shariff

This study presents an integrated approach to evaluate the efficiency of fracturing stimulation and predict well production performance. As the pressure disturbance propagates throughout the reservoir during long-time transient flow regimes, it will shape an expanding drainage volume. A macroscopic “compressible tank model (CTM)” using weak (integral) form of mass balance equation is derived to relate dynamic drainage volume (DDV) and average reservoir pressure to production history in extremely shale reservoirs. Fluids and rock compressibility, desorption parameters (for shale or coal gas), and production rates control the speed at which the boundaries advance. After the changes of average reservoir pressure within the expanding drainage volume are obtained, a new empirical inflow performance relationship (transient IPR) correlation is proposed to describe well performance during long transient flow periods in shale reservoirs. This new empirical correlation shows better match performance with field data than that of conventional Vogel-type IPR curves. The integrated approach of both CTM model and transient IPR correlation is used to determine and predict the optimal fracturing spacing and the size of horizontal section for few wells from one of shale oil plays in U.S. The results suggest the existence of optimal fracture spacing and horizontal well length for multistage fractured horizontal wells in shale oil reservoirs. In practice, this paper not only provides an insight in understanding the long transient flow production characteristics of shale reservoirs using concept of expanding drainage volume. Neither methods require comprehensive inputs for the strong form (differential) nor any prior knowledge about the sophisticated shale reservoir features (shape, size, etc.), the ultimate drainage volume, the ultimate recovery, optimal fracture spacing, and the length of horizontal section for each well can also be easily obtained by this new integrated analytical method.


2020 ◽  
Author(s):  
Muayad Al-shaeli ◽  
Stefan J. D. Smith ◽  
Shanxue Jiang ◽  
Huanting Wang ◽  
Kaisong Zhang ◽  
...  

<p>In this study, novel <a>mixed matrix polyethersulfone (PES) membranes</a> were synthesized by using two different kinds of metal organic frameworks (MOFs), namely UiO-66 and UiO-66-NH<sub>2</sub>. The composite membranes were characterised by SEM, EDX, FTIR, PXRD, water contact angle, porosity, pore size, etc. Membrane performance was investigated by water permeation flux, flux recovery ratio, fouling resistance and anti-fouling performance. The stability test was also conducted for the prepared mixed matrix membranes. A higher reduction in the water contact angle was observed after adding both MOFs to the PES and sulfonated PES membranes compared to pristine PES membranes. An enhancement in membrane performance was observed by embedding the MOF into PES membrane matrix, which may be attributed to the super-hydrophilic porous structure of UiO-66-NH<sub>2</sub> nanoparticles and hydrophilic structure of UiO-66 nanoparticles that could accelerate the exchange rate between solvent and non-solvent during the phase inversion process. By adding the MOFs into PES matrix, the flux recovery ratio was increased greatly (more than 99% for most mixed matrix membranes). The mixed matrix membranes showed higher resistance to protein adsorption compared to pristine PES membranes. After immersing the membranes in water for 3 months, 6 months and 12 months, both MOFs were stable and retained their structure. This study indicates that UiO-66 and UiO-66-NH<sub>2</sub> are great candidates for designing long-term stable mixed matrix membranes with higher anti-fouling performance.</p>


Author(s):  
Rafay Ansari ◽  
◽  
German Merletti ◽  
Pavel Gramin ◽  
Peter Armitage ◽  
...  

2019 ◽  
Author(s):  
Rafay Ansari ◽  
German Merletti ◽  
Pavel Gramin ◽  
Peter Armitage

Sign in / Sign up

Export Citation Format

Share Document