scholarly journals Masticatory afficiency in denture wearers with bilateral balanced occlusion and canine guidance

2010 ◽  
Vol 21 (2) ◽  
pp. 165-169 ◽  
Author(s):  
Arcelino Farias Neto ◽  
Wilson Mestriner Junior ◽  
Adriana da Fonte Porto Carreiro
Keyword(s):  
Scientific Evidence ◽  
Colorimetric Method ◽  
Complete Dentures ◽  
Synthetic Material ◽  
Subjective Data ◽  
Masticatory Efficiency ◽  
Canine Guidance ◽  
Efficiency Test ◽  
Edentulous Patients ◽  
Double Blinded

The maintenance of masticatory function is especially important for patients wearing complete dentures due to their limitations. Thus, the bilateral balanced occlusal concept is used to achieve greater masticatory efficiency. However, a critical review of the literature reveals that there is not sufficient scientific evidence to support bilateral balanced occlusion as the most appropriate occlusal concept in complete dentures. Therefore, the aim of this study was to evaluate the masticatory efficiency in complete dentures wearers with bilateral balanced occlusion and canine guidance. A double-blinded controlled crossover clinical trial was conducted. The sample was composed by 24 edentulous patients who wore sets of complete dentures with both occlusal concepts during equal periods of 3 months. Objective data were collected through the masticatory efficiency test performed by the colorimetric method with the beads, in which capsules of a synthetic material enclosing fuchsine-containing granules were used. Subjective data were recorded by patient's ratings of their chewing function. No significant statistical difference was found for masticatory efficiency (p=0.095) between the two occlusal concepts studied. The results suggest that bilateral balanced occlusion does not improve the masticatory efficiency in complete denture wearers.

scholarly journals Evaluation of masticatory capacity and efficiency in total and partial edentulous patients in Araraquara

2018 ◽  
Vol 5 (2) ◽  
pp. 32
Author(s):  
Patricia Aleixo dos Santos Domingos ◽  
Ana Luísa Botta Martins De Oliveira ◽  
Ariellen Amanda Dos Reis
Keyword(s):  
Tap Water ◽  
Good Efficiency ◽  
Self Evaluation ◽  
Masticatory Efficiency ◽  
Removable Prosthesis ◽  
Efficiency Test ◽  
Edentulous Patients ◽  
Natural Dentition ◽  
The University ◽  
State Examination

Aim: This study aims to compare masticatory performance between total prosthesis users and individuals with partial or total natural dentition to evaluate masticatory capacity and efficiency in individuals in Araraquara/SP.Material and Methods: 31 individuals between 55 and 99 years old were evaluated, both genders, frequent users of Dentistry Clinic of the University of Araraquara (Uniara) and residents at Recanto Feliz, in the same town. A cognitive evaluation was carried out through a mini mental state examination in order to define inclusion criteria to individuals of sample. Next, a questionnaire was applied, with pre-coded questions on the masticatory capacity and an efficiency test, through the grinding test, where patients received 5 almonds to be grinded and not swallowed. The fragments were poured in granulometric sieves (2mm, 4mm and 4,75mm) to analyze the food fragmentation under tap water. Participants were divided into 3 groups: G1 (n=13) – superior and inferior total prosthesis user, or total or partial edentulous; G2 (n=4) – Total prosthesis user and/or partial removal prosthesis user (PRP) or partial dentition; and G3 (n=14) – complete or partial dentition or PRP user.Results: Efficiency test results showed the G1 patients presented good efficiency and 8 were considered poor; G2 patients were all classified as poor, and G3 patients were 9 poor, 2 regular and 3 good. Regarding to the questionnaires, most patients from the 3 groups felt impossibility to masticate some food, and need special preparation to chew. On take more time to masticate when compared to other people, all patients from G2 answered affirmatively, while only 46.1% G1 and 50% G3 gave the same answer.Just 15.4% G1 and 28.6% G2 are not satisfied with the tame they take.About avoid in front of other people, most patients from G2 and G3 use to, however, 69.2% G1 answered negatively. Regarding to the masticatory capacity self-evaluation, they answered regular.Conclusions: Masticatory efficiency of people using removable prosthesis did not achieve the ideal of a complete dentition. However, it is still better than in individuals with partial dentition or not rehabilitated.

scholarly journals Comprehensive Treatment of a Partially Edentulous Patient with Overdentures

2014 ◽  
Vol 4 (3) ◽  
pp. 185-189
Author(s):  
Jyoti Nadgere ◽  
Ganesh Pandurang Mengal
Keyword(s):  
Treatment Plan ◽  
The Other ◽  
Comprehensive Treatment ◽  
Complete Dentures ◽  
Edentulous Patient ◽  
Partial Denture ◽  
Masticatory Efficiency ◽  
Important Benefit ◽  
Natural Teeth ◽  
Edentulous Patients

ABSTRACT Treatment of partially edentulous patients with few remaining teeth is very challenging. These cases can be successfully treated with natural teeth supported overdentures. Comprehensive treatment plan with natural teeth supported overdentures saves the proprioceptive response of the teeth, along with other benefits such as improved masticatory efficiency, better retention, stability, support as compared to conventional tissue supported complete dentures. The other most important benefit of overdentures is the psychological security of well retaining dentures which increases patient's confidence level. This article presents a case report in which a partially edentulous patient was successfully rehabilitated with comprehensive treatment of maxillary natural teeth supported overdenture with locator attachment (Zest Anchors) and mandibular partial denture. How to cite this article Mengal GP, Ram SM, Nadgere J, Shah N. Comprehensive Treatment of a Partially Edentulous Patient with Overdentures. J Contemp Dent 2014;4(3):185-189.

scholarly journals Effect of mandibular complete dentures relining on occlusal force distribution using T-scan system

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Eman M. Ibraheem ◽  
Hisham S. ElGabry
Keyword(s):  
Trial Registration ◽  
Force Distribution ◽  
Complete Dentures ◽  
Clinical Trial Registration ◽  
Occlusal Force ◽  
Left Posterior ◽  
Before And After ◽  
Soft Denture Liner ◽  
Edentulous Patients ◽  
Posterior Area

Abstract Background This study aimed to evaluate the effect of mandibular complete dentures relining using soft relining material on the distribution of various occlusal forces using T-Scan system. Fifty completely edentulous patients having their conventional complete dentures earlier fabricated and utilized were selected for this study. Patients were controlled diabetics, characterized by having their residual alveolar ridges moderately developed and lined with firm mucoperiosteum. Mandibular complete dentures were relined with soft denture liner and T-Scan device was used for occlusal force distribution measurement prior to denture relining and three months thereafter the relinning procedure. Results Comparison between occlusal forces percentages before and after denture relining revealed that occlusal forces percentages was significantly lower after denture relining in anterior area, significantly higher after denture relining in right posterior area, where it was insignificantly higher after relining in left posterior area. Conclusions Our findings revealed that the use of soft denture liner for mandibular complete denture relining significantly improved the occlusal load distribution. Clinical trial registration Trial registration NCT, NCT04701970. Registered 23/11/2020—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT04701970

scholarly journals Digital Workflow to Fabricate Complete Dentures for Edentulous Patients Using a Reversing and Superimposing Technique

2021 ◽  
Vol 11 (13) ◽  
pp. 5786
Author(s):  
Hwa-Jung Lee ◽  
Jeongho Jeon ◽  
Hong Seok Moon ◽  
Kyung Chul Oh
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Digital Data ◽  
Complete Dentures ◽  
Intraoral Scanner ◽  
Digital Workflow ◽  
Denture Base ◽  
Scan Data ◽  
Edentulous Patients ◽  
Aided Design

This technical procedure demonstrates a 4-step completely digital workflow for the fabrication of complete dentures in edentulous patients. The digital scan data of the edentulous arches were obtained using an intraoral scanner, followed by the fabrication of modeless trial denture bases using additive manufacturing. Using the trial denture base and a wax rim assembly, the interarch relationship was recorded. This record was digitized using an intraoral scanner and reversed for each maxillary and mandibular section individually. The digital scan data directly obtained using the intraoral scanner were superimposed over the reversed data, establishing a proper interarch relationship. The artificial teeth were arranged virtually and try-in dentures were additively manufactured. Subsequently, the gingival and tooth sections were additively manufactured individually and characterized. Thus, fabrication of digital complete dentures can be accomplished using digital data characteristics. The workflow includes data acquisition using an intraoral scanner, data processing using reverse engineering and computer-aided design software programs, and additive manufacturing.

scholarly journals The Effect of Complete Dentures on the Quality of Life of Edentulous Patients in the South Indian Population Based on Gender and Systemic Disease

Cureus ◽  
2019 ◽  
Author(s):  
Madhankumar Seenivasan ◽  
Fathima Banu ◽  
Athiban Inbarajan ◽  
Parthasarathy Natarajan ◽  
Shanmuganathan Natarajan ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Indian Population ◽  
Systemic Disease ◽  
Population Based ◽  
South Indian Population ◽  
Complete Dentures ◽  
The South ◽  
South Indian ◽  
Edentulous Patients

scholarly journals Computerized cephalometric evaluation of changes following treatment with complete dentures

2012 ◽  
Vol 65 (3-4) ◽  
pp. 163-167
Author(s):  
Ljiljana Strajnic ◽  
Branka Miskovic
Keyword(s):  
Longitudinal Analysis ◽  
Computer Software ◽  
Complete Denture ◽  
Cephalometric Analysis ◽  
Complete Dentures ◽  
Longitudinal Evaluation ◽  
Facial Height ◽  
Cephalometric Radiograph ◽  
Edentulous Patients ◽  
Diagnostics And Therapy

The aim of this study was to provide longitudinal evaluation of the changes after complete dentures therapy and the rate of residual ridge resorption through a six-year period of denture wearing. The authors presented the case of a 76-year-old patient, edentulous for twelve years, wearing complete dentures for six years, with the eugnat jaw relationship. Cephalometric radiograph was carried out in the process of new complete denture production, while the evaluation was carried out after six years. Cephalometric analysis was performed by using ?Dr. Ceph? computer software (FYI Technologies, GA, USA). After six years, the reduction of anterior total facial height was 5.5 mm and the anterior lower facial height was 5.5 mm, the vertical residual ridge reduction of the maxilla was 1.4 mm and the reduction of the mandible was 3mm. The study confirms the reliability and advantages of cephalometric analyses and reveals their application possibilities in prosthetic diagnostics and therapy, as well as in evaluation of rehabilitative results in edentulous patients and longitudinal analysis of changes on the orofacial complex tissues and intemaxillary relationships.

Sign in / Sign up

Export Citation Format

Share Document