scholarly journals Digital Workflow to Fabricate Complete Dentures for Edentulous Patients Using a Reversing and Superimposing Technique

2021 ◽  
Vol 11 (13) ◽  
pp. 5786
Author(s):  
Hwa-Jung Lee ◽  
Jeongho Jeon ◽  
Hong Seok Moon ◽  
Kyung Chul Oh
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Digital Data ◽  
Complete Dentures ◽  
Intraoral Scanner ◽  
Digital Workflow ◽  
Denture Base ◽  
Scan Data ◽  
Edentulous Patients ◽  
Aided Design

This technical procedure demonstrates a 4-step completely digital workflow for the fabrication of complete dentures in edentulous patients. The digital scan data of the edentulous arches were obtained using an intraoral scanner, followed by the fabrication of modeless trial denture bases using additive manufacturing. Using the trial denture base and a wax rim assembly, the interarch relationship was recorded. This record was digitized using an intraoral scanner and reversed for each maxillary and mandibular section individually. The digital scan data directly obtained using the intraoral scanner were superimposed over the reversed data, establishing a proper interarch relationship. The artificial teeth were arranged virtually and try-in dentures were additively manufactured. Subsequently, the gingival and tooth sections were additively manufactured individually and characterized. Thus, fabrication of digital complete dentures can be accomplished using digital data characteristics. The workflow includes data acquisition using an intraoral scanner, data processing using reverse engineering and computer-aided design software programs, and additive manufacturing.

scholarly journals Digital Denture Fabrication: A Technical Note

2021 ◽  
Vol 11 (17) ◽  
pp. 8093
Author(s):  
Shavkat Dusmukhamedov ◽  
Chu-Nui Lee ◽  
Seung-Mi Jeong ◽  
Byung-Ho Choi
Keyword(s):  
Technical Note ◽  
Digital Data ◽  
Complete Dentures ◽  
Intraoral Scanner ◽  
Denture Base ◽  
Digital Impressions ◽  
Fabrication Procedure ◽  
Conventional Manner ◽  
Digital Denture ◽  
Edentulous Jaws

Fabricating a complete denture in a conventional manner may be complicated and difficult. The purpose of this article was to describe the benefits of a fully digital workflow and fabrication procedure of complete dentures based on digital impressions of edentulous jaws. The digital data for the workflow were acquired using an intraoral scanner and were then used to design the denture base and teeth. The resulting data were exported to a 3D printer or a milling machine for denture fabrication.

scholarly journals Clinical outcomes and Complications of CAD-CAM Fabricated Complete Dentures; An update and review

2021 ◽  
Vol 38 (SI-2) ◽  
pp. 92-97
Author(s):  
Emir YÜZBAŞIOĞLU ◽  
Yeşim ÖLÇER US ◽  
Gökhan ÖZDEMİR ◽  
Berkman ALBAYRAK
Keyword(s):  
Clinical Outcomes ◽  
Computer Aided Design ◽  
Improve Patient Care ◽  
Computer Assisted ◽  
Complete Dentures ◽  
Dental Practitioners ◽  
Cad Cam ◽  
Promising Treatment ◽  
Edentulous Patients ◽  
Aided Design

For decades, conventional complete dentures (CD) have been a promising treatment for edentulous patients. The introduction of digital technology in CD fabrication streamlines and simplifies the treatment process and offers new and specific applications for the completely edentulous patients. Computer-aided design/computer-assisted manufactured (CAD/CAM) CD protocols can improve efficiency and offer specific applications in specific situations to improve patient care, satisfaction, and convenience. The aim of this review is to assess and evaluate the clinical outcomes and complication of CAD/CAM fabricated CD systems and to provide information about currently available systems for dental practitioners.

Additive Manufacturing Distortion Compensation Based on Scan Data of Built Geometry

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Matthew McConaha ◽  
Sam Anand
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Thermal Gradients ◽  
Distortion Compensation ◽  
Stl File ◽  
Data Points ◽  
Part Distortion ◽  
Scan Data ◽  
Aided Design ◽  
Am Processes

Abstract Additive manufacturing (AM) processes such as direct metal laser sintering (DMLS) are highly attractive manufacturing processes due to the ability to create certain geometries which would be prohibitive or even impossible to manufacture by other means. However, with such high thermal gradients which are usually present in these processes, manufacturing distortions may result in the creation of unacceptable parts. This paper presents an approach to compensate input STL files based on registration of the point cloud from sacrificial part builds. A novel strain energy based non-rigid registration algorithm has been developed for robust registration of data points to the original computer-aided design (CAD) model. A neural network based approach is used to learn the deformation of the geometry based on the deviation of the scan geometry. This network is subsequently used to modify the STL file to generate a new compensated STL file. The compensated STL file was validated by building parts and comparing the change in the part distortion.

scholarly journals Current Status of Digital Complete Dentures Technology

Prosthesis ◽  
2021 ◽  
Vol 3 (3) ◽  
pp. 229-244
Author(s):  
Aristeidis Villias ◽  
Hercules Karkazis ◽  
Stavros Yannikakis ◽  
Antonios Theocharopoulos ◽  
Nikitas Sykaras ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Current Knowledge ◽  
New Technology ◽  
Current Status ◽  
Complete Dentures ◽  
Supporting Surface ◽  
Digital Workflow ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Fabrication of complete dentures (CDs) utilizing computer-aided design and computer-aided manufacturing (CAD/CAM) methods has attracted a lot of attention. The purpose of this paper was to summarize current knowledge about digital CDs and the relevant technology, and to present the application of the new technology in a dental geriatrics case. Initially, some of the challenges regarding digitization of the oral mucosa as a supporting surface of the CDs’ intaglio surface are listed. Next, a brief introduction of the CAD software capabilities regarding CDs is presented. The latest CAM additive and subtractive techniques for CDs are following. Subsequently, the consecutive steps for the construction of a digital CD as part of the prosthodontic treatment of a 90-year-old ambulative female patient are presented. Finally, some considerations about the digital workflow in CD manufacturing are discussed. In conclusion, the new digital technology has clear advantages; however, implementation requires careful planning. The digital workflow is applicable and versatile.

Custom fabrication of try-in wax complete denture

2016 ◽  
Vol 22 (3) ◽  
pp. 539-543 ◽  
Author(s):  
Fusong Yuan ◽  
Peijun lv ◽  
Pengfei Wang ◽  
Yuguang Wang ◽  
Yong Wang ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Base Plate ◽  
Complete Dentures ◽  
Content Type ◽  
Edentulous Patients ◽  
Set Up ◽  
Aided Design ◽  
Artificial Teeth

Purpose The use of removable complete dentures is a selectable restorative procedure for edentulous patients. To improve the fabrication quality and efficiency of removable complete dentures, this paper aims to introduce a new method to fabricate customized wax complete dentures with additive manufacturing. This process uses complementary digital technologies, and allows faster and better manufacture of complete dentures. Design/methodology/approach In the study, a dental scanner was used to obtain surface data from edentulous casts and rims made by the dentist. A parameterized three-dimensional graphic database of artificial teeth was pre-established. Specialized computer-aided design software was used to set up the artificial dentition and design the esthetic gingiva and base plate. A selective laser sintering machine was used to transfer the data from stereolithography files into a wax base plate with location holes for each artificial tooth. Findings Under this method, a set of wax base plates with 28 location holes available for the placement of the artificial teeth were designed and fabricated within 6 h. The try-in wax dentures fitted the patient’s mouth well, besides occlusion relationships. Then, the occlusion relationships can be adjusted manually to achieve a balanced centric occlusion. Originality/value This method can be used to design and fabricate wax try-in removable complete dentures semi-automatically and rapidly; however, the algorithm for the occlusion contact design needs to be improved.

Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wiktoria Maria Wojnarowska ◽  
Jakub Najowicz ◽  
Tomasz Piecuch ◽  
Michał Sochacki ◽  
Dawid Pijanka ◽  
...  
Keyword(s):  
Veterinary Medicine ◽  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Fused Deposition Modelling ◽  
Content Type ◽  
Fused Deposition ◽  
Secondary Objective ◽  
Traditional Manufacturing ◽  
Aided Design

Purpose Chicken orthoses that cover the ankle joint area are not commercially available. Therefore, the main purpose of this study is to fabricate a customised temporary Ankle–Foot Orthosis (AFO) for a chicken with a twisted ankle using computer-aided design (CAD) and three-dimensional (3D) printing. The secondary objective of the paper is to present the specific application of Additive Manufacturing (AM) in veterinary medicine. Design/methodology/approach The design process was based on multiple sketches, photos and measurements that were provided by the owner of the animal. The 3D model of the orthosis was made with Autodesk Fusion 360, while the prototype was fabricated using fused deposition modelling (FDM). Evaluation of the AFO was performed using the finite element method. Findings The work resulted in a functional 3D printed AFO for chicken. It was found that the orthosis made with AM provides satisfactory stiffen and a good fit. It was concluded that AM is suitable for custom bird AFO fabrication and, in some respects, is superior to traditional manufacturing methods. It was also concluded that the presented procedure can be applied in other veterinary cases and to other animal species and other parts of their body. AM provides veterinary with a powerful tool for the production of well-fitted and durable orthoses for animals. Research limitations/implications The study does not include the chicken's opinion on the comfort or fit of the manufactured AFO due to communication issues. Evaluation of the final prototype was done by the researchers and the animal owner. Originality/value No evidence was found in the literature on the use of AM for chicken orthosis, so this study is the first to describe such an application of AM. In addition, the study demonstrates the value of AM in veterinary medicine, especially in the production of devices such as orthoses.

scholarly journals DECOMPOSITION ALGORITHM FOR TOOL PATH PLANNING FOR WIRE-ARC ADDITIVE MANUFACTURING

2018 ◽  
Vol Vol.18 (No.1) ◽  
pp. 96-107 ◽  
Author(s):  
Lam NGUYEN ◽  
Johannes BUHL ◽  
Markus BAMBACH
Keyword(s):  
Additive Manufacturing ◽  
Path Planning ◽  
Computer Aided Design ◽  
Tool Path ◽  
Heuristic Method ◽  
Support Material ◽  
Build Time ◽  
Cad Models ◽  
Aided Design ◽  
Wire Arc Additive Manufacturing

Three-axis machines are limited in the production of geometrical features in powder-bed additive manufacturing processes. In case of overhangs, support material has to be added due to the nature of the process, which causes some disadvantages. Robot-based wire-arc additive manufacturing (WAAM) is able to fabricate overhangs without adding support material. Hence, build time, waste of material, and post-processing might be reduced considerably. In order to make full use of multi-axis advantages, slicing strategies are needed. To this end, the CAD (computer-aided design) model of the part to be built is first partitioned into sub-parts, and for each sub-part, an individual build direction is identified. Path planning for these sub-parts by slicing then enables to produce the parts. This study presents a heuristic method to deal with the decomposition of CAD models and build direction identification for sub-entities. The geometric data of two adjacent slices are analyzed to construct centroidal axes. These centroidal axes are used to navigate the slicing and building processes. A case study and experiments are presented to exemplify the algorithm.

scholarly journals ADDITIVE MANUFACTURING - APPLICATION OPPORTUNITIES FOR THE AVIATION INDUSTRY

2015 ◽  
Vol 6 (2) ◽  
pp. 63-86
Author(s):  
Dipesh Dhital ◽  
Yvonne Ziegler
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Computer Aided Design ◽  
Free Form ◽  
Aviation Industry ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Subtractive Manufacturing ◽  
Aided Design

Additive Manufacturing also known as 3D Printing is a process whereby a real object of virtually any shape can be created layer by layer from a Computer Aided Design (CAD) model. As opposed to the conventional Subtractive Manufacturing that uses cutting, drilling, milling, welding etc., 3D printing is a free-form fabrication process and does not require any of these processes. The 3D printed parts are lighter, require short lead times, less material and reduce environmental footprint of the manufacturing process; and is thus beneficial to the aerospace industry that pursues improvement in aircraft efficiency, fuel saving and reduction in air pollution. Additionally, 3D printing technology allows for creating geometries that would be impossible to make using moulds and the Subtractive Manufacturing of drilling/milling. 3D printing technology also has the potential to re-localize manufacturing as it allows for the production of products at the particular location, as and when required; and eliminates the need for shipping and warehousing of final products.

Increasing Part Accuracy in Additive Manufacturing Processes Using a k-d Tree Based Clustered Adaptive Layering

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Neeraj Panhalkar ◽  
Ratnadeep Paul ◽  
Sam Anand
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Adaptive Slicing ◽  
Stl File ◽  
Build Time ◽  
Standard File Format ◽  
Aided Design ◽  
Profile Errors

Additive manufacturing (AM) is widely used in aerospace, automobile, and medical industries for building highly accurate parts using a layer by layer approach. The stereolithography (STL) file is the standard file format used in AM machines and approximates the three-dimensional (3D) model of parts using planar triangles. However, as the STL file is an approximation of the actual computer aided design (CAD) surface, the geometric errors in the final manufactured parts are pronounced, particularly in those parts with highly curved surfaces. If the part is built with the minimum uniform layer thickness allowed by the AM machine, the manufactured part will typically have the best quality, but this will also result in a considerable increase in build time. Therefore, as a compromise, the part can be built with variable layer thicknesses, i.e., using an adaptive layering technique, which will reduce the part build time while still reducing the part errors and satisfying the geometric tolerance callouts on the part. This paper describes a new approach of determining the variable slices using a 3D k-d tree method. The paper validates the proposed k-d tree based adaptive layering approach for three test parts and documents the results by comparing the volumetric, cylindricity, sphericity, and profile errors obtained from this approach with those obtained using a uniform slicing method. Since current AM machines are incapable of handling adaptive slicing approach directly, a “pseudo” grouped adaptive layering approach is also proposed here. This “clustered slicing” technique will enable the fabrication of a part in bands of varying slice thicknesses with each band having clusters of uniform slice thicknesses. The proposed k-d tree based adaptive slicing approach along with clustered slicing has been validated with simulations of the test parts of different shapes.

Laser Additive Manufacturing

3D Printing ◽  
2017 ◽  
pp. 154-171 ◽  
Author(s):  
Rasheedat M. Mahamood ◽  
Esther T. Akinlabi
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Cad Model ◽  
Laser Additive Manufacturing ◽  
Computer Aided ◽  
Manufacturing Technologies ◽  
Aided Design

Laser additive manufacturing is an advanced manufacturing process for making prototypes as well as functional parts directly from the three dimensional (3D) Computer-Aided Design (CAD) model of the part and the parts are built up adding materials layer after layer, until the part is competed. Of all the additive manufacturing process, laser additive manufacturing is more favoured because of the advantages that laser offers. Laser is characterized by collimated linear beam that can be accurately controlled. This chapter brings to light, the various laser additive manufacturing technologies such as: - selective laser sintering and melting, stereolithography and laser metal deposition. Each of these laser additive manufacturing technologies are described with their merits and demerits as well as their areas of applications. Properties of some of the parts produced through these processes are also reviewed in this chapter.

Sign in / Sign up

Export Citation Format

Share Document