scholarly journals Computerized cephalometric evaluation of changes following treatment with complete dentures

2012 ◽  
Vol 65 (3-4) ◽  
pp. 163-167
Author(s):  
Ljiljana Strajnic ◽  
Branka Miskovic
Keyword(s):  
Longitudinal Analysis ◽  
Computer Software ◽  
Complete Denture ◽  
Cephalometric Analysis ◽  
Complete Dentures ◽  
Longitudinal Evaluation ◽  
Facial Height ◽  
Cephalometric Radiograph ◽  
Edentulous Patients ◽  
Diagnostics And Therapy

The aim of this study was to provide longitudinal evaluation of the changes after complete dentures therapy and the rate of residual ridge resorption through a six-year period of denture wearing. The authors presented the case of a 76-year-old patient, edentulous for twelve years, wearing complete dentures for six years, with the eugnat jaw relationship. Cephalometric radiograph was carried out in the process of new complete denture production, while the evaluation was carried out after six years. Cephalometric analysis was performed by using ?Dr. Ceph? computer software (FYI Technologies, GA, USA). After six years, the reduction of anterior total facial height was 5.5 mm and the anterior lower facial height was 5.5 mm, the vertical residual ridge reduction of the maxilla was 1.4 mm and the reduction of the mandible was 3mm. The study confirms the reliability and advantages of cephalometric analyses and reveals their application possibilities in prosthetic diagnostics and therapy, as well as in evaluation of rehabilitative results in edentulous patients and longitudinal analysis of changes on the orofacial complex tissues and intemaxillary relationships.

scholarly journals Estimation of Vertical Dimension of Occlusion in Edentuleous Patients Using Cephalometric Analysis

2017 ◽  
Vol 05 (01) ◽  
pp. 030-038
Author(s):  
Ritu Batra ◽  
Sanjay Kalra ◽  
Ajay Bansal ◽  
Siddharth Nerula ◽  
Rajat Dang
Keyword(s):  
Diagnostic Tool ◽  
Treatment Modality ◽  
Complete Denture ◽  
Vertical Dimension ◽  
Cephalometric Analysis ◽  
Complete Dentures ◽  
Functional Rehabilitation ◽  
Non Invasive ◽  
Facial Height ◽  
Supporting Structures

Abstract“The best of friends fall out with time and so do teeth.”Thus, there is a need to replace the lost teeth and the supporting structures for the patient's social demands and functional rehabilitation. Prosthetic treatment with complete dentures is a very common treatment modality; the biggest challenge in its fabrication is to duplicate the normal vertical dimension. Failure can be avoided by completing the treatment without changing the vertical dimension and obtaining an optimal facial proportion. There are many methods to record VD. Radiographic cephalometry has been used as a diagnostic tool in Prosthodontics for over five decades and numerous authors, like Ricketts (1981), McNamara (1984) and Slavicek (1984) developed and computerized these techniques to co-relate and record VD in patients. However cephalometric analysis can help to visualize skeletal and facial proportion relation. The present study was done to use the lateral radiographs with cephalometric analysis, as it could be a simple, non-technique sensitive, non-invasive and atraumatic way to determine VD for complete denture patients and also to compare physiologic methods (swallowing/phonetics) with cephalometric method to record lower facial height.

scholarly journals Application of cephalometric analysis for determination of vertical dimension of occlusion: A literature review

2012 ◽  
Vol 65 (5-6) ◽  
pp. 217-222 ◽  
Author(s):  
Ljiljana Strajnic ◽  
Darinka Stanisic-Sinobad
Keyword(s):  
Precise Determination ◽  
Complete Denture ◽  
Vertical Dimension ◽  
Cephalometric Analysis ◽  
Rest Position ◽  
Clinical Methods ◽  
Extraction Period ◽  
Edentulous Patients ◽  
Clinical Determination

Introduction. Optimal reconstruction of vertical dimension of occlusion is crucial for functional and physiognomic rehabilitation of edentulous patients. This article is aimed at presenting attitudes and studies on application of cephalometric analysis in obtaining optimal vertical dimension of occlusion. The review of literature presents the studies which analyse the possibilities of cephalometric analysis aimed at improving the clinical methods for vertical dimension of occlusion determination in treatment of edentulous patients. The research carried out so far can roughly be divided into: cephalometric vertical dimension of occlusion evaluation in dentulous patients performed to determine precise indicators of vertical dimension of occlusion and to establish cephalometric standards for practical application in prosthodontics; the method of producing pre-extraction cephalometric registries involves the production of cephalometric radiographs for potential prosthodontic patients in dental pre-extraction period which are kept for reference to be used in later therapy; the cephalometric method of registering the position of physiologic rest position of the mandible involves measuring cephalometric parameters in cephalometric radiographs made when the mandible is in physiologic rest position; cephalometric evaluation of vertical dimension of occlusion in complete denture therapy after clinical determination of intemaxillary relationship is recommended for timely detection of possible mistakes, with a possibility of correction in the process of complete denture production; and cephalometric analysis in edentulous patients with old complete dentures for a planned vertical dimension of occlusion extension. Conclusion. Data from the literature give no proof of a scientific and universally accepted method for precise determination of vertical dimension of occlusion, which is a point many authors agree upon. Different methods proposed for vertical dimension of occlusion determination in everyday practice are usually recommended in combination with other methods. Determination of individual, morphological vertical dimension of occlusion indicators by cephalometric analysis is, in this sense, one of the directions for finding a better solution when planning an artificial occlusion complex.

scholarly journals Processing Errors in Complete Denture Fabrication - A Survey

2020 ◽  
Vol 11 (SPL3) ◽  
pp. 1371-1377
Author(s):  
Farhat Yaasmeen Sadique Basha ◽  
Venkatesh Kommi ◽  
Raj S S
Keyword(s):  
Patient Satisfaction ◽  
Dental Students ◽  
Complete Denture ◽  
Complete Dentures ◽  
Elder Patients ◽  
Facial Shape ◽  
Cad Cam ◽  
Materials Used ◽  
Edentulous Patients ◽  
Processing Errors

There has been an increase in the incidence of complete edentulism among the elder patients. Complete dentures are the most common and preferred treatment of choice. Complete dentures help in masticatory function and restore the facial shape of the edentulous patients. Fabrication of the complete dentures is, therefore, a very important task for the clinician to ensure patient satisfaction. Errors may occur during the denture fabrication and these are called processing errors. It is a multifactorial process. The aim of the survey is to study the errors that occur during processing of a complete denture. It is a questionnaire based study conducted with a batch of 100 dental students. The questionnaire consisted of 16 questions focused on different fabrication techniques, timing, materials used, etc. by various students. The data collected was represented statistically and discussed. Dough technique was the most preferred method adopted by 39% of the students. Shorter curing cycles produced less defects, but majority of the students used longer cycles (41%). Most of them reported fractures (16%) and microporosities (11%) as defects. We can conclude that there are a few areas of error during the processing of dentures by the dental students. The incidence of these errors, however appears to be low. There is a scope for CAD/CAM complete dentures in the future to eliminate the possibilities of errors.

scholarly journals Comparison of vertical dimension of occlusion on edentulous and dentulous patients

2004 ◽  
Vol 51 (1) ◽  
pp. 7-11
Author(s):  
Ljiljana Strajnic
Keyword(s):  
Vertical Dimension ◽  
Class I ◽  
Control Group ◽  
Cephalometric Analysis ◽  
Complete Dentures ◽  
Skeletal Class ◽  
Clinical Methods ◽  
Natural Teeth ◽  
Edentulous Patients ◽  
Experimental Group

One of the existing methods for analysis of the vertical dimension of occlusion or occlusal face height is the cephalometric analysis of the distance from nasion to menton (N-Me). The vertical dimension of occlusion was measured in 30 lateral cephalometric radiographs of edentulous patients (experimental group), with models of complete dentures after clinical methods of determining the vertical and horizontal intermaxillary relation and 30 lateral cephalometric radiographs of participants with natural teeth (control group). The aims of the present study were: to analyse the vertical dimension of occlusion in participants with natural teeth skeletal class I, to cephalometrically evaluate the reconstructing vertical dimension of occlusion of edentulous patients skeletal class I , to compare examined variables between individuals with natural teeth and edentulous patients. The results indicated a remarkable correlation in the vertical dimension of occlusion established initially for the edentulous patients when compared with the measurements made for dentulous patients. The results showed the vertical dimension of occlusion span a range between 106,7 - 138 mm (X _ =122,24) in subjects with natural teeth. In edentulous patients the values of vertical dimension of occlusion span ranged between 109,8 - 141,6 mm (X _ =122,46). The vertical dimension of occlusion in male participans was increased in the group of persons with natural teeth as well as in edentulous patients. The results of t-test proved that there were no statistically significant differences in examined variables between persons with natural teeth and edentulous patients (p>0,01).

scholarly journals Influence of balanced occlusion in complete dentures on the decrease in reduction of an edentulous ridge

2012 ◽  
Vol 69 (12) ◽  
pp. 1055-1060 ◽  
Author(s):  
Srdjan Postic
Keyword(s):  
Longitudinal Study ◽  
Complete Denture ◽  
Alveolar Ridge ◽  
Complete Dentures ◽  
Test Results ◽  
Male And Female ◽  
Panoramic Radiographs ◽  
Edentulous Patients ◽  
The Stability ◽  
Artificial Teeth

Background/Aim. Balanced occlusal arrangement of artificial teeth and balanced occlusion is a specific type of occlusion that preserves the stability of complete dentures. Balanced occlusion comprises realization of tooth contacts at the working side as well as at the balancing side, at the same time. The aim of this study was to assess the influence of balanced occlusal arrangement of artificial teeth on the decrease in reduction of edentulous alveolar ridge. Methods. A longitudinal study on 91 fully edentulous patients was conducted using their panoramic radiographs and parameters of vertical dimension of edentulous ridges. All the patients were clinically examined by the same and a qualified dental practitioner. Numerical values of parameters of vertical dimensions of edentulous ridges and lines were statistically processed and compared using the Student?s t-test. Results. Vertical dimensions and heights of edentulous ridges were different after comparison of parameters in complete denture wearers with balanced occlusion and complete denture wearers without bilaterally balanced occlusion, as well as between male and female edentulous patients. Statistically significant differences of heights were established in complete denture wearers? with a set of artificial teeth without balanced occlusion, at the baseline and 12 months after wearing of complete dentures. Conclusion. Balanced occlusion is a favored occlusal design in setting of artificial teeth in conventional complete dentures, which preserves edentulous ridge and influence the stability of dentures.

scholarly journals Development of New Attachment System with Soft Lining Material for Implant-retained Complete Denture

2013 ◽  
Vol 3 (1) ◽  
pp. 21-24 ◽  
Author(s):  
Takayuki Ueda ◽  
Kaoru Sakurai ◽  
Takashi Koike ◽  
Syuutarou Noda ◽  
Koichiro Ogami
Keyword(s):  
Complete Denture ◽  
Maximum Force ◽  
Alveolar Ridge ◽  
Complete Dentures ◽  
Male And Female ◽  
Retention Force ◽  
Lining Material ◽  
Female Component ◽  
Edentulous Patients

ABSTRACT Purpose The retention of complete dentures is frequently difficult in edentulous patients with a severely resorbed residual alveolar ridge. In such cases, implant overdentures having a stronger retention force are useful. Although there are various types of attachment systems for implant overdentures, they are frequently complicated. We are, therefore, developing a simple attachment system focusing on a soft lining material for the female connector. The purpose of this study was to evaluate the retention force of implant overdentures applying a soft lining material for the attachment. Materials and methods The models in which seven male and female connector pairs were used. As the control, a rubber O-ring attachment system, in which a rubber O-ring female was paired with a metal ball anchor (male), having a diameter of 1.7 or 2.2 mm. In the attachment system with a soft lining material, a female component was made up of soft lining material paired with a male having a diameter of 1.7, 2.2, 2.5, 2.7 or 3.0 mm. In measuring the retention force, the maximum force required to dislodge the male from the female was recorded by a digital force gauge. Results With the rubber O-ring, the retention force was 2.9 ± 0.2 N for the 1.7 mm male and 3.3 ± 0.3 N for the 2.2 mm male; these values were higher than the respective retention forces when using a soft lining material as the female and a male of the same diameter. However, with the female comprising soft lining material, the retention force exceeded 4 N for the 2.5, 2.7 and 3.0 mm males and was higher than the retention forces for the rubber O-ring. Conclusion The proposed attachment system with soft lining material for implant overdentures provides a clinically sufficient retention force when the diameter of the male exceeds 2.5 mm. How to cite this article Koike T, Ueda T, Noda S, Ogami K, Patil PG, Sakurai K. Development of New Attachment System with Soft Lining Material for Implant-retained Complete Denture. Int J Prosthodont Restor Dent 2013;3(1):21-24.

scholarly journals Nanocomposite for Rapid Prototyped Complete Denture Eighteen months follow-up on clinical performance

2019 ◽  
Vol 70 (2) ◽  
pp. 387-392 ◽  
Author(s):  
Corina Marilena Cristache ◽  
Eugenia Eftimie Totu ◽  
Alexandra Raluca Grosu ◽  
Oana Ene ◽  
Irina Adriana Beuran ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Complete Denture ◽  
Nanocomposite Material ◽  
Prospective Clinical Study ◽  
Complete Dentures ◽  
Additive Manufacturing Technology ◽  
3D Printed ◽  
Edentulous Patients

The aim of the present study was to evidence the improved behavior of our modified PMMA-TiO2 nanocomposite material used to obtain 3D printed complete dentures. A protocol for long-term rapid prototyping complete denture manufacturing using our nanocomposite material, completely characterized and the evaluation of the clinical performance and complications after eighteen months of continuous wearing was also described. Thirty-five fully edentulous patients were enrolled in this prospective clinical study and forty-five complete dentures (31 maxillary and 14 mandibular) have been obtained using an additive manufacturing technology. Due to the good performances of the nanocomposite material, no major functional complications for the obtained medical devices occurred and the clinical outcomes for the 3D printed dentures were favorable evaluated at eighteen months follow up.

Association Between Depression and Dissatisfaction with Complete Dentures

2021 ◽  
Vol 15 (12) ◽  
pp. 3488-3490
Author(s):  
Amna Masood ◽  
Muhammad Shakeel Akram Khawaja ◽  
Nafeesa Abdullah ◽  
Noor Tarim Fahim
Keyword(s):  
Complete Denture ◽  
Complete Dentures ◽  
Cross Sectional Survey ◽  
Cross Sectional ◽  
Satisfaction Rating ◽  
Keywords Depression ◽  
Dental Hospital ◽  
Edentulous Patients ◽  
First Time

Objective: The aim of this study was to find out the role of depression in complete denture dissatisfaction and to determine frequencies of depression among the satisfied and dissatisfied patients. Study design: A cross sectional survey was carried out at Department of Prosthodontics, De’Montmorency College of Dentistry. Punjab Dental Hospital. The sample size was 80 edentulous patients having adequate maxillary and mandibular ridges. Methodology: The patients selected would be wearing complete dentures for the first time. All dentures were carefully designed. A socio-demographic form and depression rating questionnaire was filled by every participant involved in the study. After six months, satisfaction or dissatisfaction with the provided complete denture set was assessed through a separate questionnaire. The patients’ opinion concerning satisfaction with their dentures and depression was recorded and statistical analysis done. The results showed that 36.25% depressed versus 63.75% non-depressed. 28.75% were dissatisfied versus 71.25% satisfied. Conclusion: It was concluded that depression played a significant role in decreasing the satisfaction rating in first time denture wearers. Keywords: Depression, dissatisfaction, complete dentures,

scholarly journals Cephalometric Approach to Vertical Facial Height

2019 ◽  
Vol 9 (1) ◽  
pp. 54-58
Author(s):  
Suvit Maskey ◽  
Rosha Shrestha
Keyword(s):  
Class I ◽  
P Value ◽  
Cephalometric Analysis ◽  
Prosthetic Rehabilitation ◽  
Skeletal Class ◽  
Facial Height ◽  
Significant Difference ◽  
The Face ◽  
Edentulous Patients ◽  
Vertical Height

Introduction: The vertical heights and the proportions are very important for balance of the face and attractiveness along with the good smile. Harmonious vertical proportions and the Antero-posterior relations contribute to aesthetics. Therefore it is necessary to determine the vertical facial height and the ratios in treatment planning of the patients. The aims and objectives of this study are to compare the vertical facial heights of patients considering the Lower Anterior Facial Height (LAFH), the Upper Anterior Facial Height (UAFH), Total Anterior Facial Height (TAFH) and Posterior Facial Height (PFH) among the sexes in Class I skeletal group obtained from cephalometric analysis. Materials & Method: The study material comprised of 52 patients (24 males and 28 females) and lateral cephalometric radiographs were traced with Skeletal Class I relationship. Cephalometric analysis was performed by using hand tracing. Independent t tests were used for comparisons. Result: The total anterior facial height (TAFH), lower anterior facial height (LAFH), upper anterior facial height (UAFH), total posterior facial height (TPFH) measurements showed no significant differences between both sexes in Skeletal Class I group but statistically significant difference in ratios of posterior facial height and total anterior facial height and also there was statistically significant differences in the ratio between upper facial height and the total anterior facial height (p value <0.05). Conclusion: This cephalometric analysis can be applied to determine the vertical height of occlusion which can be helpful in prosthetic rehabilitation of edentulous patients.

scholarly journals Kinesiographic study of complete denture movement related to mucosa displacement in edentulous patients

2003 ◽  
Vol 17 (4) ◽  
pp. 356-361 ◽  
Author(s):  
Marco Antonio Compagnoni ◽  
Raphael Freitas de Souza ◽  
Cláudio Rodrigues Leles
Keyword(s):  
Oral Mucosa ◽  
Diagnostic System ◽  
Complete Denture ◽  
Complete Dentures ◽  
Initial Displacement ◽  
Experimental Conditions ◽  
Intermittent Loading ◽  
Physiological Load ◽  
Edentulous Patients

The mucosa that covers the residual ridges of edentulous patients may present some distortion or displacement when occlusal loading is applied in complete dentures. This distortion and movement of the denture can result in acceleration of residual ridge resorption and loss of retention and stability. The aim of this study was to analyze the pattern of upper complete denture movement related to underlying mucosa displacement. A sample of 10 complete denture wearers was randomly selected, which had acceptable upper and lower dentures and normal volume and resilience of residual ridges. The kinesiographic instrument K6-I Diagnostic System® was used to measure denture movements, according to the method proposed by Maeda et al.7, 1984. Denture movements were measured under the following experimental conditions: (A) 3 maximum voluntary clenching cycles and (B) unilateral chewing for 20 seconds. The results showed that under physiological load, oral mucosa distortion has two distinct phases: a fast initial displacement as load is applied and a slower and incomplete recovery when load is removed. Intermittent loading such as chewing progressively reduces the magnitude of the denture displacement and the recovery of the mucosa is gradually more incomplete.

Sign in / Sign up

Export Citation Format

Share Document