Removal of Released Phosphorus in Anaerobic Digested Activated Sludge Using Thickener Sludge Generated During the Total Phosphorus Removal Process in the Municipal Wastewater Treatment Plant

2016 ◽  
Vol 24 (3) ◽  
pp. 3-10
Author(s):  
Jung-In Suh ◽  
Ho-Seok Yoon ◽  
Kwan-Hoon Cho ◽  
Dae-Won Kwon
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Total Phosphorus ◽  
Wastewater Treatment Plant ◽  
Phosphorus Removal ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Municipal Wastewater Treatment Plant ◽  
Removal Process

scholarly journals Biochemical Hydrogen Potential Tests Using Different Inocula

2019 ◽  
Vol 11 (3) ◽  
pp. 622 ◽  
Author(s):  
Isabella Pecorini ◽  
Francesco Baldi ◽  
Renato Iannelli
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Digested Sludge ◽  
Anaerobic Reactor ◽  
Municipal Wastewater Treatment Plant ◽  
Solids Removal

Four inocula collected from different operating facilities were tested in their hydrogenic performances by means of two biochemical hydrogen potential test set-ups using sucrose and food waste as substrates, with the aim of evaluating the influence of inoculum media in batch fermentative assays. The selected inocula were: activated sludge collected from the aerobic unit of a municipal wastewater treatment plant, digested sludge from an anaerobic reactor treating organic waste and cattle manure, digested sludge from an anaerobic reactor treating agroindustrial residues, and digested sludge from an anaerobic reactor of a municipal wastewater treatment plant. Test results, in terms of specific hydrogen production, hydrogen conversion efficiency, and volatile solids removal efficiency, were significantly dependent on the type of inoculum. Statistical analysis showed different results, indicating that findings were due to the different inocula used in the tests. In particular, assays performed with activated sludge showed the highest performances for both substrates and both experimental set-ups.

scholarly journals Ozone-based advanced oxidation process as pre-treatment of wastewater from the wood-based industry

2017 ◽  
Author(s):  
Alexandre Amaro ◽  
Henrik Hanson ◽  
Fabio Kaczala ◽  
Marcia Marques ◽  
William Hogland
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Advanced Oxidation ◽  
Municipal Wastewater Treatment ◽  
Ph Adjustment ◽  
Municipal Wastewater Treatment Plant ◽  
Initial Ph

Three ozone-based advanced oxidation treatments (O3; O3 with initial pH adjustment and; O3/UV with initial pH adjustment) were compared for the treatment of a recalcitrant wastewater generated during washing/cleaning of surfaces and equipment used in filling and gluing processes (urea-formaldehyde and phenol-formaldehyde resins) in a wood-floor industry in Sweden. The wastewater (initial COD 3,400-4,000 mg/L) was obtained at the outlet of a sedimentation tank, which receive an inflow with an average COD of 45,000 mg/L. The experiments were performed in a semi-batch microbubble column reactor connected to a UV reactor, where 2.5 L samples of wastewater were submitted to the maximum dose of 2 g of O3 per gram of initial COD. For the full-factorial design, the independent variables were O3 concentration (g O3/Nm3); recirculation flow (L/min); and initial pH (pHi). The evaluation of the treatment performance was based on COD and TOC reductions (in %), and the effluent obtained was used in respirometric assays with activated sludge obtained at a municipal wastewater treatment plant to assess biodegradability/inhibitory effects. The results showed that ozonation at the original low pH promoted a reduction of 65% and 31% of COD and TOC respectively, but made the effluent less biodegradable. The highest COD and TOC reductions were achieved when O3 /UV treatment with pHi = 9.3 were applied (93% e 56% reductions for COD and TOC respectively). The results with the respirometry tests suggest that application of O3 only at higher pH values promoted biodegradability enhancement of the effluent, making it treatable by microbiota obtained with activated sludge from a municipal wastewater treatment plant.

Sign in / Sign up

Export Citation Format

Share Document