scholarly journals Determination of Aflatoxins in Medicinal Plants by High-Performance Liquid Chromatography–Tandem Mass Spectrometry

2013 ◽  
Vol 16 (2) ◽  
pp. 321 ◽  
Author(s):  
Nadeem Ahmad Siddique ◽  
Mohd Mujeeb ◽  
Sayeed Ahmad ◽  
Bibhu P. Panda ◽  
Mohd Makhmoor

Purpose. The intention of the proposed work is to study the presence of the aflatoxins B1, B2, G1 and G2 in medicinal plants, namely Mucuna pruriens, Delphinium denudatum and Portulaca oleraceae. Methodology. The aflatoxins were extracted, purified by immunoaffinity column chromatography and analysed by high-performance liquid chromatography–tandem quadrupole mass spectrometry with electrospray ionisation (HPLC–MS/MS). Fungal count was carried out in PDA media. Results. A good linear relationship was found for AFB1, AFB2, AFG1 and AFG2 at 1–10 ppb (r>0.9995). The analyte accuracy under three different spiking levels was 86.7–108.1 %, with low per cent relative standard deviations in each case. The aflatoxins can be separated within 5 to7 min using an Agilent XDB C18-column. We found that AFB1 and AFB2 were in trace amounts below the detection limit in M. pruriens whilst they were not detected in D. denudatum. P. oleraceae was found to be contaminated with AFB1 and AFB2. AFG1 and AFG2 were not detected in M. pruriens, P. oleraceae and were below the detection limit in D. denudatum. This was consistent with very low numbers of fungal colonies observed after 6 hr of incubation. Conclusion. The analytical method developed is simple, precise, accurate, economical and can be effectively used to determine the aflatoxins in medicinal plants and therefore to control the quality of products. The aflatoxin levels in the plant extracts examined were related to the minimal fungal load in the medicinal plants examined. This article is open to POST-PUBLICATION REVIEW. Registered readers (see “For Readers”) may comment by clicking on ABSTRACT on the issue’s contents page.

2014 ◽  
Vol 852 ◽  
pp. 266-269
Author(s):  
Xiao Fang Wang ◽  
Chun Liang Yang ◽  
Mao Fang Huang ◽  
Ming Yue Wang ◽  
Yu Bing Zha ◽  
...  

The conditions for detecting residues of diflubenzuron in vegetables by ultra high performance liquid chromatography tandem mass spectrometry were studied. The target was extracted with acetonitrile for 2 min with a homogenizer. The extaction was purifide by a conditioned Florisil SPE cartridge, and then was detected by ultra high-performance liquid chromatography with tandem mass spectrometry. The average recovery was in the range from 87.8 %- 99.2 % at spike levels of 0.1, 1.0 and 10 mg/kg in vegetables, and relative standard deviations was in the range of 4.2 %-8.9 %. The proposed method is fast, simple, sensitive and accurate.


Author(s):  
Jin-Ah Oh ◽  
Ho-Sang Shin ◽  
Hyun-Hee Lim

Abstract Background Alkylhydrazines are widely used in the industrial fields. An analysis of alkylhydrazines in surface water is need because these chemicals are likely to be discharged into wastewater and enter aquatic environments. Objective An ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method was developed to determine the levels of five alkylhydrazines (N,N-dimethylhydrazine, ethylhydrazine, 1-isopropylhydrazine, phenylhydrazine and 1-methyl-1-phenylhydrazine) in surface water. Methods This method is based on the derivatization of alkylhydrazines with 1-nitro-2-naphthaldehyde (NNA) in water. A derivatization reagent dosage of 0.5 mg of NNA, a pH of 2, and a reaction time of 30 min at 40 °C were determined to be the optimal conditions for UHPLC–MS/MS detection. The derivatives were injected into the LC system without additional extraction or purification steps. Results The proposed method was used under optimized conditions to detect alkylhydrazines in surface water, with the limit of quantification found to be 0.01–0.03 μg/L. The accuracy ranged from 91.0 to 106.0%, and the precision, expressed as the relative standard deviation, was less than 10%. Of the five alkylhydrazines, only N,N-dimethyl hydrazine was detected in the real samples at a concentration range of 0.010 to 0.041 μg/L. Conclusion The developed method can be used to confirm the presence of alkylhydrazine residues in surface water and represents an important tool for evaluating the fate of alkylhydrazines in surface water. Highlights This method to determine alkylhydrazine in surface water was developed simply and rapidly after derivatization reaction without an extraction or clean-up step in UHPLC-MS/MS.


Sign in / Sign up

Export Citation Format

Share Document