scholarly journals Synthesis of Cu3SnS4 Nanoparticles with a Novel Structure as Low-Cost Counter Electrode in Dye-Sensitized Solar Cell

Author(s):  
Benguang Zhao ◽  
2011 ◽  
Vol 485 ◽  
pp. 157-160
Author(s):  
Tatsunori Kakuda ◽  
Takashi Terasawa ◽  
Tomoaki Futakuchi

In this study, we attempted to develop a low-cost dye-sensitized solar cell (DSC) by substituting a screen-printed carbon electrode for the conventional platinum counter electrode. Carbon electrodes were formed from mixtures of activated carbon, carbon nanofiber, carbon black, and a resin. The best carbon electrode conversion efficiency obtained was approximately 90% that of a platinum-based electrode.


2021 ◽  
Vol 10 (1) ◽  
pp. 43-49
Author(s):  
Noor Hindryawati ◽  
Irfan Ashari Hiyahara ◽  
Herdian Saputra ◽  
M. Syaiful Arief ◽  
Gaanty Pragas Maniam

A dye sensitized solar cell (DSSC) is a low-cost solar cell with attractive features. DSCC contains of photoelectrode, dye, electrolyte, and counter electrode with photoelectrochemical system. The aim of this research is to determine the percent efficiency produced by DSSC from the Mahkota Dewa extract. This was carried out in various stages, namely sample preparation and extraction, DSSC assembly, TiO2 characterization using Scanning Electron Microscopy (SEM), and testing its current and voltage. The results showed that the maximum wavelength of the Mahkota Dewa extract dye test using a UV-Vis spectrophotometer was 554 nm with an absorbance of 0.163, which was believed to be the wavelength of flavonoid and anthocyanin compounds. Based on the characterization results, surface morphology was spherical and agglomerated. However, after being soaked in the dye, the surface morphology of the TiO2 layer did not appear spherical on the surface that was expected to have been covered by the dye. The measurement using sunlight sources showed that the maximum current and voltage of DSSC with a concentration of 30% w/v was 21.8x10-4A and 58.86 V with an efficiency of 22.43x10-3 %. In addition, there was a 0.482% decrease in DSSC efficiency based on the storage time which lasted for a period of 6 days.


2011 ◽  
Vol 308-310 ◽  
pp. 1561-1564
Author(s):  
Kuo Sheng Kao ◽  
Po Hsiang Kuo ◽  
Chien Chuan Cheng ◽  
Da Long Cheng ◽  
Chin Ming Wang ◽  
...  

This study provides a simple and low cost method to deposit TiO2 nanoporous thin films onto the titanium mesh substrate. The flexible titanium mesh is adopted as electrodes where a novel structure of dye-sensitized solar cell (DSSC) is fabricated. The titanium mesh owns many advantages such as low resistance, cheap and high temperature tolerance. The photoanode is fabricated while the Ti mesh immersed into the alcohol solution of nanopowder of TiO2 (P25). For a better adhesion, several treatments against the titanium mesh are carried out. The photovoltaic parameters of various DSSC are discussed through the observations of TiO2 nanoporous thin films. The alcohol solution of N719 dye is used to sensitized the photovoltaic and the electrolyte is a mixture of 0.5 M LiI, 0.05 M I2 and 0.5 M 4-tert-butyl-pyridine in 3-methoxypropionitrile. With a Xenon illuminating, a flexible cell with Jsc=2.9 mA, Voc=0.5 V and F.F =0.68, η=1.02 % is obtained.


Nano Energy ◽  
2014 ◽  
Vol 9 ◽  
pp. 392-400 ◽  
Author(s):  
Inyoung Jeong ◽  
Jaehyuk Lee ◽  
K.L. Vincent Joseph ◽  
Hyung Ik Lee ◽  
Jin Kon Kim ◽  
...  

2013 ◽  
Vol 14 (2) ◽  
pp. 628-634 ◽  
Author(s):  
Mi Xu ◽  
Guanghui Liu ◽  
Xiong Li ◽  
Heng Wang ◽  
Yaoguang Rong ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document