Automatic Fracture Network Model Update Using Smart Well Data and Artificial Neural Networks

Author(s):  
Ammal Fannoush Al-Anazi ◽  
Tayfun Babadagli
2015 ◽  
Vol 743 ◽  
pp. 612-616 ◽  
Author(s):  
J.H. Yu ◽  
De Bing Mao

Based on the feature of large thickness and poor drawing characteristics in extremely thick coal seam top-coal caving method, combined with numerous practical examples analyses, the primarily six factors influence the drawing characteristics were found out which are mining depth, coal seam strength, joint crack development, parting thickness in top-coal, caving ratios, immediate roof filling coefficient. According to 45 typical top-coal caving in extremely thick coal seam samples, the prediction of top-coal caving and drawing characteristics based on artificial neural networks was established and training samples and testing samples was determined. Use SPSS statistical software training the network model. Then select No. 9 coal seam first mining area of Tiaohu mine as the application case. The drawing property was forecast according to the established network model. Application results show that the use of artificial neural networks for top-coal caving and drawing characteristic prediction is effective and feasible.


2012 ◽  
Vol 452-453 ◽  
pp. 1116-1120
Author(s):  
Hong Ping Li ◽  
Hong Li

Simulating the overlapping capillary electrophoresis spectrogram under the dissimilar conditions by the computer system , Choosing the overlapping capillary electrophoresis spectrogram simulated under the different conditions , processing the data to compose a neural network training regulations, Applying the artificial neural networks method to make a quantitative analysis about the multi-component in the overlapping capillary electrophoresis spectrogram,Using: Radial direction primary function neural network model and multi-layered perceptron neural network model. The findings indicated that, along with the increasing of the capillary electrophoresis spectrogram noise level, the related components’ ability of the two kinds of the overlapping capillary electrophoresis spectrogram by neural network model quantitative analysis drop down. Along with the increasing of the capillary electrophoresis spectrogram’s total dissociation degree, the multi-layered perceptron neural network model to the related components’ ability of the overlapping capillary electrophoresis spectum by quantitative analysis raise up.


2017 ◽  
Vol 60 (3) ◽  
pp. 299-315 ◽  
Author(s):  
Ana Brcković ◽  
Monika Kovačević ◽  
Marko Cvetković ◽  
Iva Kolenković Močilac ◽  
David Rukavina ◽  
...  

2021 ◽  
Author(s):  
A.R. Mukhutdinov ◽  
Z.R. Vakhidova ◽  
M.G. Efimov

An increase in the productivity of oil wells is possible with the use of a promising technology based on implosion and a device for its implementation. It is known that the effectiveness of the technology depends on the design parameters of the device. Currently, a promising way to study processes is computer modeling based on modern information technologies. Therefore, solving forecasting problems using modern software based on artificial neural networks (ANNs) is an urgent task of scientific and practical interest. In this regard, the aim of the work is to develop a neural network model and its application to identify the features of the influence of the diameter and length of the implosion chamber of the device on the pressure of a water hammer during implosion. In the software environment, the following have been created and tested: a method for developing a neural network model; a method of conducting a computational experiment with it. The possibility of neural network modeling of the implosion process has been studied. The results of predicting the output parameter, in this case the pressure of the water hammer, on a pre-trained network, with a relative error of 3.5%, using the knowledge base are demonstrated. The results of applying the methodology for solving forecasting problems using software based on artificial neural networks are presented. It was found that the diameter and length of the implosion chamber significantly affect the pressure of the water hammer. The practical significance of the work lies in the ability to determine the required values of the diameter and length of the implosion chamber of the device at a given level of water hammer pressure.


2021 ◽  
Author(s):  
Iason Iakovidis ◽  
Konstantinos Morfidis‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌

<p>A Finite Element (FE) model of bridge Z24 was developed to reflect its dynamic response and investigate the physical reasons behind the large variations observed on its natural modal properties during a 7-month continuous monitoring campaign conducted before its demolition in 1997. A significant increase in natural frequencies was observed especially during the winter period, something which was explained as a consequence of deck stiffness increase and boundary conditions change, due to the formation of ice layers on the deck and supports.</p><p>The paper concentrates on the procedure of developing a FE model update process, which employs Artificial Neural Networks (ANNs), which are trained using data generated through the Monte Carlo process and analysed within the FE model of the bridge. The aim of this procedure is to calibrate the FE update sensitivity parameters in such a way as to replicate the dynamic behaviour of the bridge based on real-time measured eigenvalues obtained during monitoring for five different temperature states at -10 oC, -5 oC, 0 oC, 5 oC and 10oC.</p>


2020 ◽  
Vol 13 (4) ◽  
pp. 550-556
Author(s):  
Louiza Dehyadegari ◽  
Somayeh Khajehasani

Background: Electric insulation is generally a vital factor in both the technical and economic feasibility of complex power and electronic systems. Several researches focus on the behavior of insulators under polluted conditions. That they are mathematical and physical models of insulators, experiments and simulation programs. Also experiments on critical flashover voltage are timeconsuming and have more limitations such as high cost and need for especial equipment’s. Objective: This paper focused on optimized predicting of critical flashover voltage of Polluted insulators based on artificial intelligence. Methods: Fuzzy logic and artificial neural networks are used in order to have the best estimation of the critical flashover. Results: In this way the correlation index (regression coefficient) improved about 2% toward previous works with same experimental data sets. Additionally, with using the properties of nonlinear artificial neural networks we can have the perfect (R=100%) prediction of the critical flashover voltage on experimental dataset. Conclusion: In this paper two methods for the estimation of critical flashover voltage of polluted insulators using fuzzy logic and neural networks was presented. the regression coefficient R achieved by the optimal parameters is 98.4% while in previous work is 96.7%. In neural network model we have regression coefficient 100% and in previous neural network model it was 99%. our test set is the same as previous works and achieved from experiments. These results show that fuzzy proposed methods are powerful and useful tools lead to a more accurate, generalized and objective estimation of the critical flashover voltage.


2020 ◽  
Vol 2020 (10) ◽  
pp. 42-50
Author(s):  
Nataliya Sukhanova

There is developed a neural network model for disease rate prediction and assessment of antiepidemic measure effectiveness. As basis of the development there were adopted the existing automated information systems which are used for monitoring and visualization of data on Moscow population disease rate. Under conditions of the emergence and propagation of new dangerous infectious and virus diseases the information processing must be carried out in real time, a prediction for future is required. It is necessary to create, update and adjust rapidly a set of anti-epidemic measures offered. The investigation purpose consists in the prediction of infection spreading and the assessment of anti-epidemic measures based on data on the population disease rate. There is offered a neural network model realized on the basis of the modular computing system and artificial neural networks. A modular computing system includes modules of different types connected between each other with a switch network. In the modular computing system there are included modules of artificial neural networks with the special switch structure. Switchboards allow connecting and disconnecting single modules and elements of neural networks. A neural network model changes dynamically its structure and adapted to a current epidemic situation.


2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Petr Maca ◽  
Pavel Pech

The presented paper compares forecast of drought indices based on two different models of artificial neural networks. The first model is based on feedforward multilayer perceptron, sANN, and the second one is the integrated neural network model, hANN. The analyzed drought indices are the standardized precipitation index (SPI) and the standardized precipitation evaporation index (SPEI) and were derived for the period of 1948–2002 on two US catchments. The meteorological and hydrological data were obtained from MOPEX experiment. The training of both neural network models was made by the adaptive version of differential evolution, JADE. The comparison of models was based on six model performance measures. The results of drought indices forecast, explained by the values of four model performance indices, show that the integrated neural network model was superior to the feedforward multilayer perceptron with one hidden layer of neurons.


Sign in / Sign up

Export Citation Format

Share Document