Interpretation of 3D Seismic Data for Prospectivity of Underexplored Deep Formations in Pateke Field, Niger Delta Basin, Nigeria

2020 ◽  
Author(s):  
I. S. Nwike ◽  
A. G. Onwuemesi ◽  
K. K. Nwozor ◽  
L. N. Onuba
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
3D Seismic ◽  
Niger Delta Basin ◽  
3D Seismic Data

scholarly journals Characterization of reservoir sands using 3D seismic attributes in the coastal swamp area of Niger Delta Basin

2021 ◽  
Author(s):  
Oluwatoyin Khadijat Olaleye ◽  
Pius Adekunle Enikanselu ◽  
Michael Ayuk Ayuk
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Seismic Attributes ◽  
Effective Porosity ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Niger Delta Basin

AbstractHydrocarbon accumulation and production within the Niger Delta Basin are controlled by varieties of geologic features guided by the depositional environment and tectonic history across the basin. In this study, multiple seismic attribute transforms were applied to three-dimensional (3D) seismic data obtained from “Reigh” Field, Onshore Niger Delta to delineate and characterize geologic features capable of harboring hydrocarbon and identifying hydrocarbon productivity areas within the field. Two (2) sand units were delineated from borehole log data and their corresponding horizons were mapped on seismic data, using appropriate check-shot data of the boreholes. Petrophysical summary of the sand units revealed that the area is characterized by high sand/shale ratio, effective porosity ranged from 16 to 36% and hydrocarbon saturation between 72 and 92%. By extracting attribute maps of coherence, instantaneous frequency, instantaneous amplitude and RMS amplitude, characterization of the sand units in terms of reservoir geomorphological features, facies distribution and hydrocarbon potential was achieved. Seismic attribute results revealed (1) characteristic patterns of varying frequency and amplitude areas, (2) major control of hydrocarbon accumulation being structural, in terms of fault, (3) prospective stratigraphic pinch-out, lenticular thick hydrocarbon sand, mounded sand deposit and barrier bar deposit. Seismic Attributes analysis together with seismic structural interpretation revealed prospective structurally high zones with high sand percentage, moderate thickness and high porosity anomaly at the center of the field. The integration of different seismic attribute transforms and results from the study has improved our understanding of mapped sand units and enhanced the delineation of drillable locations which are not recognized on conventional seismic interpretations.

scholarly journals Evaluation of seismic attributes for reservoir characterization over Edi field, Niger delta, Nigeria using 3d seismic data

2020 ◽  
Vol 8 (2) ◽  
pp. 168
Author(s):  
Nyeneime O. Etuk ◽  
Mfoniso U. Aka ◽  
Okechukwu A. Agbasi ◽  
Johnson C. Ibuot
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Reservoir Characterization ◽  
Seismic Attributes ◽  
3D Seismic ◽  
Root Mean Square Amplitude ◽  
Phase Gradient ◽  
Major Fault ◽  
Seismic Sections ◽  
3D Seismic Data

Seismic attributes were evaluated over Edi field, offshore Western Niger Delta, Nigeria, via 3D seismic data. Manual mappings of the horizons and faults on the in-lines and cross-lines of the seismic sections were done. Various attributes were calculated and out put on four horizons corresponding to the well markers at different formations within the well were identified. The four horizons identified, which includes: H1, H2, H3 and H4 were mapped and interpreted across the field. The operational agenda was thru picking given faults segments on the in–line of seismic volume. A total of five faults coded as F1, F2, F3, F4 and F5, F1 and F5 were the major fault and were observed as extending through the field. Structural and horizon mappings were used to generate time structure maps. The maps showed the various positions and orientations of the faults. Different attributes which include: root mean square amplitude, instantaneous phase, gradient magnitude and chaos were run on the 3D seismic data. The amplitude and incline magnitude maps indicate direct hydrocarbon on the horizon maps; this is very important in the drilling of wells because it shows areas where hydrocarbons are present in the subsurface. The seismic attributes revealed information, which was not readily apparent in the raw seismic data.   

Structure of the footwall of a listric fault system revealed by 3D seismic data from the Niger Delta

2011 ◽  
Vol 24 (1) ◽  
pp. 107-123 ◽  
Author(s):  
Dominic Maloney ◽  
Richard Davies ◽  
Jonathan Imber ◽  
Stephen King
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Fault System ◽  
3D Seismic ◽  
Listric Fault ◽  
3D Seismic Data

scholarly journals Transition zones analysis using empirical capillary pressure model from well logs and 3D seismic data on ‘Stephs’ field, onshore, Niger Delta, Nigeria

2019 ◽  
Vol 10 (3) ◽  
pp. 1227-1242
Author(s):  
O. Abiola ◽  
F. O. Obasuyi
Keyword(s):  
Capillary Pressure ◽  
Seismic Data ◽  
Niger Delta ◽  
Time Structure ◽  
Well Logs ◽  
3D Seismic ◽  
Seismic Section ◽  
Transition Zones ◽  
Mobile Water ◽  
3D Seismic Data

AbstractCapillary pressure is an important characteristic that indicates the zones of interaction between two-phase fluids or fluid and rock occurring in the subsurface. The analysis of transition zones (TZs) using Goda (Sam) et al.’s empirical capillary pressure from well logs and 3D seismic data in ‘Stephs’ field, Niger Delta, was carried out to remove the effect of mobile water above the oil–water contact in reservoirs in the absence of core data/information. Two reservoirs (RES B and C) were utilized for this study with net thicknesses (NTG) ranging from 194.14 to 209.08 m. Petrophysical parameters computed from well logs indicate that the reservoirs’ effective porosity ranges from 10 to 30% and the permeability ranges from 100 to > 1000 mD, which are important characteristics of good hydrocarbon bearing zone. Checkshot data were used to tie the well to the seismic section. Faults and horizons were mapped on the seismic section. Time structure maps were generated, and a velocity model was used to convert the time structure maps to its depth equivalent. A total of six faults were mapped, three of which are major growth faults (F1, F4 and F5) and cut across the study area. Reservoir properties were modelled using SIS and SGS. The capillary pressure log, curves and models generated were useful in identifying the impact of mobile water in the reservoir as they show the trend of saturating and interacting fluids. The volume of oil estimated from reservoirs B and C without taking TZ into consideration was 273 × 106 and 406 × 106 mmbbls, respectively, and was found to be higher than the volume of oil estimated from the two reservoirs while taking TZ into consideration which was 242 × 106 and 256 × 106 mmbbls, respectively. The results have indicated the presence of mobile water, which have further established that conventionally recoverable hydrocarbon (RHC) is usually overestimated; hence, TZ analysis has to be performed for enhancing RHC for cost-effective extraction and profit maximization.

Sign in / Sign up

Export Citation Format

Share Document