3D Fluid Flow Behavior in Heterogeneous Porous Media Characterized by Geostatistical Method

1990 ◽  
Author(s):  
D.R. Guerillot ◽  
P. Lemouzy ◽  
Christian Ravenne ◽  
Galli Alain
Keyword(s):  
Porous Media ◽  
Fluid Flow ◽  
Flow Behavior ◽  
Heterogeneous Porous Media ◽  
Geostatistical Method

scholarly journals Numerical Simulation of Two-Phase Flows in Heterogeneous Porous Media

2020 ◽  
Vol 21 (2) ◽  
pp. 339
Author(s):  
I. Carneiro ◽  
M. Borges ◽  
S. Malta
Keyword(s):  
Porous Media ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Water Injection ◽  
Heterogeneous Porous Media ◽  
Flow In Porous Media ◽  
High Porosity ◽  
Two Phase ◽  
Recovery Method ◽  
Porosity And Permeability

In this work,we present three-dimensional numerical simulations of water-oil flow in porous media in order to analyze the influence of the heterogeneities in the porosity and permeability fields and, mainly, their relationships upon the phenomenon known in the literature as viscous fingering. For this, typical scenarios of heterogeneous reservoirs submitted to water injection (secondary recovery method) are considered. The results show that the porosity heterogeneities have a markable influence in the flow behavior when the permeability is closely related with porosity, for example, by the Kozeny-Carman (KC) relation.This kind of positive relation leads to a larger oil recovery, as the areas of high permeability(higher flow velocities) are associated with areas of high porosity (higher volume of pores), causing a delay in the breakthrough time. On the other hand, when both fields (porosity and permeability) are heterogeneous but independent of each other the influence of the porosity heterogeneities is smaller and may be negligible.

scholarly journals Complexity Reduction of Multiphase Flows in Heterogeneous Porous Media

SPE Journal ◽  
2016 ◽  
Vol 21 (01) ◽  
pp. 144-151 ◽  
Author(s):  
Mehdi Ghommem ◽  
Eduardo Gildin ◽  
Mohammadreza Ghasemi
Keyword(s):  
Porous Media ◽  
Model Reduction ◽  
Flow Behavior ◽  
Computational Cost ◽  
Heterogeneous Porous Media ◽  
Production Optimization ◽  
Dynamic Mode ◽  
Two Phase ◽  
Fine Grid ◽  
Mode Decomposition

Summary In this paper, we apply mode decomposition and interpolatory projection methods to speed up simulations of two-phase flows in heterogeneous porous media. We propose intrusive and nonintrusive model-reduction approaches that enable a significant reduction in the size of the subsurface flow problem while capturing the behavior of the fully resolved solutions. In one approach, we use the dynamic mode decomposition. This approach does not require any modification of the reservoir simulation code but rather post-processes a set of global snapshots to identify the dynamically relevant structures associated with the flow behavior. In the second approach, we project the governing equations of the velocity and the pressure fields on the subspace spanned by their proper-orthogonal-decomposition modes. Furthermore, we use the discrete empirical interpolation method to approximate the mobility-related term in the global-system assembly and then reduce the online computational cost and make it independent of the fine grid. To show the effectiveness and usefulness of the aforementioned approaches, we consider the SPE-10 benchmark permeability field, and present a numerical example in two-phase flow. One can efficiently use the proposed model-reduction methods in the context of uncertainty quantification and production optimization.

scholarly journals ISPH simulations of natural convection from heated rotating paddles on a circular cylinder inside a cross-shaped cavity filled with a nanofluid

2020 ◽  
Author(s):  
Abdelraheem Mahmoud Aly ◽  
Ehab Mahmoud
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Circular Cylinder ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Heterogeneous Porous Media ◽  
Convection Flow

The numerical simulations of the uniform circular rotation of paddles on circular cylinder results natural convection flow of Al2O3-water in a cross-shaped porous cavity were performed by incompressible representation of smoothed particle hydrodynamics entitled ISPH method. The two vertical area of a cross-shaped cavity is saturated with homogeneous porous media and the whole horizontal area of a cross-shaped cavity is saturated with heterogeneous porous media. The inner paddles on the circular cylinder are rotating around their center by a uniform circular velocity. The whole embedded body of paddles on a circular cylinder has temperature Th. The wall-sides of a cross-shaped cavity are positioned at a temperature Tc. The current geometry can be applied in analysis and understanding the thermophysical behaviors of the electronic motors. The angular velocity is taken as ! = 7:15 and consequently the natural convection case is only considered due to the low speed of inner rotating shape. The performed simulations are represented in the graphical for the temperature distributions, velocity fields and tabular forms for average Nusselt number. The results revealed that an augmentation on paddle length rises the heat transfer and speed of fluid flow inside a cross shaped cavity. Also, an incrementation on Rayleigh number augments the heat transfer and speed of the fluid flow inside a cross-shaped cavity. The fluid flow is circulated only around the rotating inner shape when Darcy parameter decreases to Da = 105. Average Nusselt number Nu enhances by an increment on the paddle lengths and nanoparticles volume fraction

Sign in / Sign up

Export Citation Format

Share Document