scholarly journals Soft sediment deformation features in Dauki Fault region: Evidence of paleoearthquakes, Shillong Plateau, NE India

2021 ◽  
Author(s):  
B.V Lakshmi ◽  
Praveen B. Gawali
Keyword(s):  
Urban Areas ◽  
Late Quaternary ◽  
Soft Sediment ◽  
Shillong Plateau ◽  
Deformation Structures ◽  
Regional Deformation ◽  
Ne India ◽  
Deformation Features ◽  
Sediment Deformation ◽  
Soft Sediment Deformation

Abstract The northeastern region (NER) of India has a number of complex regional geological structures, out of which the Dauki fault (DF) is a prominent one. The E-W trending reverse DF, which is referred to go through the southern margin of Shillong Plateau (SP), have played major role in the regional deformation of the adjoining areas and was believed to be active during the Late Quaternary time. Previous paleoseismological studies conducted on the eastern and western part of the DF, Bangladesh, revealed that the fault ruptured in AD 849–920 and AD 1548 respectively. However there were no studies on the DF from southern side of the SP, India. For the first time, from Indian side, soft sediment deformation structures (SSDS) are reported from five trenches in and around the DF zone, SP. Close to the Dauki village, five trenches in the eastern part of the DF, SP, show presence of micro faulting, sand dykes, disturbed strata, and water escape structures. The detailed investigation of SSDS indicates that the origin for deformation is seismic trigger. The 14C AMS dating of deformation structures generated coseismically by earthquakes suggest three seismic events occurred between 130 and 920 year BP, 5415 to 9140 year BP, and at about 4285 year BP. This study confirms that DF is indeed active, at least, since the mid-Holocene. More trenching and dating of seismically induced deformation features are needed to accurately calculate the recurrence interval of major earthquakes that can strike the fast-expanding urban areas in India and Bangladesh.

scholarly journals The Use of Soft-Sediment Deformation Structures As Proxies For Paleoseismic Activity And Shaking: A Review

2021 ◽  
Author(s):  
Ning Zhong ◽  
Hanchao Jiang ◽  
Haibing Li ◽  
Dechen Su ◽  
Hongyan Xu ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Lacustrine Sediments ◽  
Seismic Hazard Assessment ◽  
Soft Sediment ◽  
Surface Rupture ◽  
Advantages And Disadvantages ◽  
Deformation Structures ◽  
Sediment Deformation ◽  
Soft Sediment Deformation

Abstract Quantifying the magnitude of an earthquake is very important for long-term and medium-term earthquake prediction, post-earthquake emergency rescue and seismic hazard assessment. Paleoseismology is the investigation of past earthquakes in the geological record, in particular their location, timing and size. Uncertainties remain in the paleoearthquake magnitudes determined by traditional surface rupture parameters, especially because most seismic events do not result in surface ruptures. In order to address the problem of magnitude evaluation of earthquakes that did not reveal major dislocations, this paper deals with the methods used to determine the seismic shaking intensity based on the types and forms of soft-sediment deformation structures, including maximum liquefaction distance, thickness of disturbed layer, empirical formulae, and thickness of rapidly deposited sand layer. Then we discuss and analyze these methods in terms of their theoretical basis, advantages and disadvantages, accuracy, applicability and problems. We chose two case studies: first, a typical seismics-related deposit (liquefied layer and dsirupted layer) represented by a seismite in the late-Pleistocene Lake Lisan section near Masada in the Dead Sea Basin; and second, the liquefied diapir triggered by an earthquake in the late-Quaternary lacustrine sediments at Luobozhai in the upper reaches of the Minjiang River, east Tibet. The six methods listed above are employed to determine earthquake magnitudes associated with the seismics-related deposit and liquefied diapir, yielding magnitudes of 5.5-6.5 and 6-7, respectively. The combination of the six methods, provided a new and relatively convenient method for determining seismic shaking, especially in lacustrine sediments. This study can serves as a valid reference for comparing methods of calculating the magnitude of a paleoearthquake based on surface rupture parameters, and provides a better understanding of the long-term seismic activity and risk in tectonically active regions.

3D soft-sediment deformation structures: evidence for Quaternary seismicity in the Madrid basin, Spain

Terra Nova ◽  
1997 ◽  
Vol 9 (5) ◽  
pp. 208-212 ◽  
Author(s):  
P.G. Silva ◽  
J.C. Canaveras ◽  
S. Sanchez-Moral ◽  
J. Lario ◽  
E. Sanz
Keyword(s):  
Soft Sediment ◽  
Deformation Structures ◽  
Sediment Deformation ◽  
Soft Sediment Deformation

Dead Sea shoreline facies with seismically-induced soft-sediment deformation structures, Israel

2000 ◽  
Vol 49 (4) ◽  
pp. 197-214 ◽  
Author(s):  
Dan Bowman ◽  
Dorit Banet-Davidovich ◽  
Hendrik J. Bruins ◽  
Johannes Van der Plicht
Keyword(s):  
Dead Sea ◽  
Soft Sediment ◽  
Deformation Structures ◽  
Sediment Deformation ◽  
Soft Sediment Deformation

scholarly journals Lacustrine Slope-Related Soft-Sediment Deformation Structures in the Cretaceous Gyeokpori Formation, Buan Area, SW Korea, and Volcanism-Induced Seismic Shocks as Their Possible Trigger

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 721
Author(s):  
Ukhwan Byun ◽  
A.J. (Tom) van Loon ◽  
Kyoungtae Ko
Keyword(s):  
Facies Analysis ◽  
Deformation Mechanisms ◽  
Volcanic Area ◽  
Cohesive Sediments ◽  
Soft Sediment ◽  
Deformation Structures ◽  
Sediment Deformation ◽  
Soft Sediment Deformation ◽  
Siliciclastic Rocks ◽  
Sediment Layers

The Gyeokpori Formation in the Buan volcanic area primarily contains siliciclastic rocks interbedded with volcanoclastics. These sediments are characterized by a variety of soft-sediment deformation structures (SSDS). The SSDS in the Gyeokpori Formation are embedded in poorly sorted conglomerates; slump folds are also present in the formation. The deformation mechanisms and triggers causing the deformation are not yet clear. In the present study, the trigger of the SSDS in the Gyeokpori Formation was investigated using facies analysis. This included evaluation of the reworking process of both cohesive and non-cohesive sediments. The analysis indicates that the SSDS are directly or indirectly associated with the alternation of conglomerates and mud layers with clasts. These layers underwent non-cohesive and cohesive deformation, respectively, which promoted SSDS formation. The slump folds were controlled by the extent of cohesive and non-cohesive deformation experienced by the sediment layers in the slope environment. The SSDS deformation style and morphology differ, particularly in the case of reworking by slump activity. This study contributes to the understanding of lacustrine slope-related soft-sediment deformation structures.

scholarly journals MULTIFRACTAL ANALYSIS OF SEISMICALLY INDUCED SOFT-SEDIMENT DEFORMATION STRUCTURES IMAGED BY X-RAY COMPUTED TOMOGRAPHY

Fractals ◽  
2018 ◽  
Vol 26 (01) ◽  
pp. 1850018 ◽  
Author(s):  
YOSHITO NAKASHIMA ◽  
JUNKO KOMATSUBARA
Keyword(s):  
Computed Tomography ◽  
Multifractal Analysis ◽  
Flow Model ◽  
Soft Sediment ◽  
X Ray ◽  
Deformation Structures ◽  
X Ray Computed ◽  
Sediment Deformation ◽  
Soft Sediment Deformation ◽  
Iron Bearing

Unconsolidated soft sediments deform and mix complexly by seismically induced fluidization. Such geological soft-sediment deformation structures (SSDSs) recorded in boring cores were imaged by X-ray computed tomography (CT), which enables visualization of the inhomogeneous spatial distribution of iron-bearing mineral grains as strong X-ray absorbers in the deformed strata. Multifractal analysis was applied to the two-dimensional (2D) CT images with various degrees of deformation and mixing. The results show that the distribution of the iron-bearing mineral grains is multifractal for less deformed/mixed strata and almost monofractal for fully mixed (i.e. almost homogenized) strata. Computer simulations of deformation of real and synthetic digital images were performed using the egg-beater flow model. The simulations successfully reproduced the transformation from the multifractal spectra into almost monofractal spectra (i.e. almost convergence on a single point) with an increase in deformation/mixing intensity. The present study demonstrates that multifractal analysis coupled with X-ray CT and the mixing flow model is useful to quantify the complexity of seismically induced SSDSs, standing as a novel method for the evaluation of cores for seismic risk assessment.

Sign in / Sign up

Export Citation Format

Share Document