Exemptions Under Patents and Certificates Covering Plants and Comments on Material Transfer Agreements

2015 ◽  
pp. 107-109
Author(s):  
David J. Houser
Keyword(s):  
Material Transfer

scholarly journals On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Wear ◽  
2021 ◽  
pp. 203853
Author(s):  
Magnus Heldin ◽  
Jannica Heinrichs ◽  
Staffan Jacobson
Keyword(s):  
Plastic Deformation ◽  
Sliding Friction ◽  
Material Transfer

Use of interelectrode material transfer of nickel and copper‑nickel alloy to carbon fibers to assemble miniature glucose sensors

2018 ◽  
Vol 816 ◽  
pp. 45-53 ◽  
Author(s):  
Jan Rozsypal ◽  
Daniel Riman ◽  
Vladimir Halouzka ◽  
Tomas Opletal ◽  
David Jirovsky ◽  
...  
Keyword(s):  
Nickel Alloy ◽  
Carbon Fibers ◽  
Glucose Sensors ◽  
Material Transfer ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Comparison of material transfer in electrical discharge machining of AISI H13 die steel

2009 ◽  
Vol 223 (7) ◽  
pp. 1733-1740 ◽  
Author(s):  
S Kumar ◽  
R Singh ◽  
T P Singh ◽  
B L Sethi
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Tungsten Powder ◽  
Material Transfer ◽  
Die Steel ◽  
Cent Increase ◽  
Aisi H13 ◽  
Copper Chromium ◽  
H13 Die Steel ◽  
And Tungsten

The electrical discharge machining (EDM) process is extensively used in the tool and die making industry for accurate machining of internal profiles in hardened materials. Although it is essentially a material removal process, efforts have been made in the recent past to use it as surface treatment method. This article investigates and compares the effect of material transfer from electrode bodies (copper, copper—chromium, and copper—tungsten) and tungsten powder suspended in the dielectric medium during die-sinking EDM of AISI H13 die steel. Results show a 76 per cent increase in micro-hardness by machining with a copper—tungsten electrode and a 111 per cent increase by machining with tungsten powder mixed in the dielectric. The copper—chromium electrode gives the best surface roughness (Ra) value of 2.67 μ m. Scanning electron microscopy and X-ray diffraction analysis of the machined surfaces show alloying of parent material with tungsten and tungsten carbide. Chemical composition of the machined surfaces was further checked on an optical emission spectrometer to verify the results. Besides a significant presence of tungsten, an increase in the percentage of carbon is also observed.

Optimization and surface modification in electrical discharge machining of AA 6061/SiCp composite using Cu–W electrode

2015 ◽  
Vol 231 (3) ◽  
pp. 332-348 ◽  
Author(s):  
Balbir Singh ◽  
Jatinder Kumar ◽  
Sudhir Kumar
Keyword(s):  
Process Parameters ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Surface Characteristics ◽  
Electrode Wear ◽  
Material Transfer ◽  
Machined Surface ◽  
Recast Layer Thickness ◽  
Pulse On Time ◽  
Pulse Off Time

This paper presents the experimental investigation on the electro-discharge machining of aluminum alloy 6061 reinforced with SiC particles using sintered Cu–W electrode. Experiments have been designed as per central composite rotatable design, using response surface methodology. Machining characteristics such as material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR) have been investigated under the influence of four electrical process parameters; namely peak current, pulse on time, pulse off time, and gap voltage. The process parameters have been optimized to obtain optimal combination of MRR, EWR, and SR. Further, the influence of sintered Cu–W electrode on surface characteristics has been analyzed with scanning electron microscopy, energy dispersive spectroscopy, and Vicker microhardness tests. The results revealed that all the process parameters significantly affect MRR, EWR, and SR. The machined surface properties are modified as a result of material transfer from the electrode. The recast layer thickness is increased at higher setting of electrical parameters. The hardness across the machined surface is also increased by the use of sintered Cu–W electrode.

Modelling material transfer in metal rolling using plasticine

Wear ◽  
2008 ◽  
Vol 264 (1-2) ◽  
pp. 18-25 ◽  
Author(s):  
M.N. Fox ◽  
M.P.F. Sutcliffe
Keyword(s):  
Material Transfer

Material transfer behavior of AgTiB2 and AgSnO2 electrical contact materials under different currents

2017 ◽  
Vol 114 ◽  
pp. 139-148 ◽  
Author(s):  
Hangyu Li ◽  
Xianhui Wang ◽  
Xiuhua Guo ◽  
Xiaohong Yang ◽  
Shuhua Liang
Keyword(s):  
Electrical Contact ◽  
Material Transfer ◽  
Contact Materials ◽  
Transfer Behavior ◽  
Electrical Contact Materials
Sign in / Sign up

Export Citation Format

Share Document