324 Building Spent Nuclear Fuel (SNF) Handling History from Characterization to Packaging for Transfer to the Interim Storage Area (OCRWM)

2002 ◽  
Author(s):  
M M MCCARTHY
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Storage Area ◽  
Interim Storage

In-Service Inspection of Extended Dry Storage of Spent Nuclear Fuel, Part I: Crawler Technology Development

2021 ◽  
Author(s):  
Ryan M. Meyer ◽  
Jeremy Renshaw ◽  
Jamie Beard ◽  
Jon Tatman ◽  
Matt Keene ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Technology Development ◽  
Storage System ◽  
Dry Storage ◽  
Majority Population ◽  
The Usa ◽  
Extended Operation ◽  
Interim Storage ◽  
Physical Access

Abstract This paper describes development and demonstration of remote crawling systems to support periodic examinations of interim dry storage system (DSS) canisters for spent nuclear fuel in the USA. Specifically, this work relates to robotic crawler developments for “canister” based DSS systems, which form the majority population of DSSs in the USA for interim storage of spent nuclear fuel. Consideration of potential degradation of the welded stainless-steel canister in these systems is required for continued usage in the period of extended operation (PEO) beyond their initial licensed or certified terms. Challenges with performing the periodic examinations are associated with physical access to the canister surface, which is constrained due to narrow annulus spaces between the canister and the overpack, tortuous entry pathways, and high temperatures and radiation doses that can be damaging to materials and electronics. Motivations for performing periodic examinations and developing robotic crawlers for performing those examinations remotely will be presented, and several activities to demonstrate robotic crawlers for different DSS systems are summarized.

Interim Storage of Spent Nuclear Fuel in the Arctic Far North

1997 ◽  
pp. 49-55
Author(s):  
A. P. Hoskins ◽  
R. A. Rankin ◽  
B. G. Motes ◽  
J. O. Carlson ◽  
C. W. Lagle ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
The Arctic ◽  
Far North ◽  
Interim Storage

Developing a Concept for a National Used Fuel Interim Storage Facility in the United States

2013 ◽  
Author(s):  
Donald Wayne Lewis
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
Nuclear Waste ◽  
Spent Nuclear Fuel ◽  
The United States ◽  
Yucca Mountain ◽  
Storage Facility ◽  
Spent Fuel ◽  
Geological Repository ◽  
Interim Storage

In the United States (U.S.) the nuclear waste issue has plagued the nuclear industry for decades. Originally, spent fuel was to be reprocessed but with the threat of nuclear proliferation, spent fuel reprocessing has been eliminated, at least for now. In 1983, the Nuclear Waste Policy Act of 1982 [1] was established, authorizing development of one or more spent fuel and high-level nuclear waste geological repositories and a consolidated national storage facility, called a “Monitored Retrievable Storage” facility, that could store the spent nuclear fuel until it could be placed into the geological repository. Plans were under way to build a geological repository, Yucca Mountain, but with the decision by President Obama to terminate the development of Yucca Mountain, a consolidated national storage facility that can store spent fuel for an interim period until a new repository is established has become very important. Since reactor sites have not been able to wait for the government to come up with a storage or disposal location, spent fuel remains in wet or dry storage at each nuclear plant. The purpose of this paper is to present a concept developed to address the DOE’s goals stated above. This concept was developed over the past few months by collaboration between the DOE and industry experts that have experience in designing spent nuclear fuel facilities. The paper examines the current spent fuel storage conditions at shutdown reactor sites, operating reactor sites, and the type of storage systems (transportable versus non-transportable, welded or bolted). The concept lays out the basis for a pilot storage facility to house spent fuel from shutdown reactor sites and then how the pilot facility can be enlarged to a larger full scale consolidated interim storage facility.

scholarly journals Recent Progress on the Standardized DOE Spent Nuclear Fuel Canister

2002 ◽  
Author(s):  
D. Keith Morton ◽  
Spencer D. Snow ◽  
Tom E. Rahl ◽  
Tom J. Hill ◽  
Richard P. Morissette
Keyword(s):  
Nuclear Fuel ◽  
Recent Progress ◽  
Spent Nuclear Fuel ◽  
Transportation Systems ◽  
Pressure Vessels ◽  
Department Of Energy ◽  
Regulatory Agencies ◽  
Spent Fuel ◽  
American Society ◽  
Interim Storage

The Department of Energy (DOE) has developed a set of containers for the handling, interim storage, transportation, and disposal in the national repository of DOE spent nuclear fuel (SNF). This container design, referred to as the standardized DOE SNF canister or standardized canister, was developed by the Department’s National Spent Nuclear Fuel Program (NSNFP) working in conjunction with the Office of Civilian Radioactive Waste Management (OCRWM) and the DOE spent fuel sites. This canister had to have a standardized design yet be capable of accepting virtually all of the DOE SNF, be placed in a variety of storage and transportation systems, and still be acceptable to the repository. Since specific design details regarding the storage, transportation, and repository disposal of DOE SNF were not finalized, the NSNFP recognized the necessity to specify a complete DOE SNF canister design. This allowed other evaluations of canister performance and design to proceed as well as providing standardized canister users adequate information to proceed with their work. This paper is an update of a paper [1] presented to the 1999 American Society of Mechanical Engineers (ASME) Pressure Vessels and Piping (PVP) Conference. It discusses recent progress achieved in various areas to enhance acceptance of this canister not only by the DOE complex but also fabricators and regulatory agencies.

Long Term Storage of Nuclear Spent Fuel as Key Role of Japan’s Nuclear Fuel Cycle Until 2100: Cost and Benefit

2010 ◽  
Author(s):  
Tadahiro Katsuta
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
Storage Site ◽  
Spent Fuel ◽  
Final Disposal ◽  
Enriched Uranium ◽  
Interim Storage ◽  
Reprocessing Plant

Political and technical advantages to introduce spent nuclear fuel interim storage into Japan’s nuclear fuel cycle are examined. Once Rokkasho reprocessing plant starts operation, 80,000 tHM of spent Low Enriched Uranium (LEU) fuel must be stored in an Away From Reactor (AFR) interim storage site until 2100. If a succeeding reprocessing plant starts operating, the spent LEU will reach its peak of 30,000 tHM before 2050, and then will decrease until the end of the second reprocessing plant operation. Throughput of the second reprocessing plant is assumed as twice of that of Rokassho reprocessing plant, indeed 1,600tHM/year. On the other hand, tripled number of final disposal sites for High Level Nuclear Waste (HLW) will be necessary with this condition. Besides, large amount of plutonium surplus will occur, even if First Breeder Reactors (FBR)s consume the plutonium. At maximum, plutonium surplus will reach almost 500 tons. These results indicate that current nuclear policy does not solve the spent fuel problems but rather complicates them. Thus, reprocessing policy could put off the problems in spent fuel interim storage capacity and other issues could appear such as difficulties in large amount of HLW final disposal management or separated plutonium management. If there is no reprocessing or MOX use, the amount of spent fuel will reach over 115,000 tones at the year of 2100. However, the spent fuel management could be simplified and also the cost and the security would be improved by using an interim storage primarily.

Measurement of Atmospheric Sea Salt Concentration in the Dry Storage Facility of the Spent Nuclear Fuel

2006 ◽  
Author(s):  
Masumi Wataru ◽  
Hisashi Kato ◽  
Satoshi Kudo ◽  
Naoko Oshima ◽  
Koji Wada ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Spent Nuclear Fuel ◽  
Sea Salt ◽  
Storage Facility ◽  
Japan Society ◽  
Spent Fuel ◽  
Dry Storage ◽  
Storage Methods ◽  
Interim Storage

Spent nuclear fuel coming from a Japanese nuclear power plant is stored in the interim storage facility before reprocessing. There are two types of the storage methods which are wet and dry type. In Japan, it is anticipated that the dry storage facility will increase compared with the wet type facility. The dry interim storage facility using the metal cask has been operated in Japan. In another dry storage technology, there is a concrete overpack. Especially in USA, a lot of concrete overpacks are used for the dry interim storage. In Japan, for the concrete cask, the codes of the Japan Society of Mechanical Engineers and the governmental technical guidelines are prepared for the realization of the interim storage as well as the code for the metal cask. But the interim storage using the concrete overpack has not been in progress because the evaluation on the stress corrosion cracking (SCC) of the canister is not sufficient. Japanese interim storage facilities would be constructed near the seashore. The metal casks and concrete overpacks are stored in the storage building in Japan. On the other hand, in USA they are stored outside. It is necessary to remove the decay heat of the spent nuclear fuel in the cask from the storage building. Generally, the heat is removed by natural cooling in the dry storage facility. Air including the sea salt particles goes into the dry storage facility (Figure 1). Concerning the concrete overpack, air goes into the cask body and cools the canister. Air goes along the canister surface and is in contact with the surface directly. In this case, the sea salt in the air attaches to the surface and then there is the concern about the occurrence of the SCC. For the concrete overpack, the canister including the spent fuel is sealed by the welding. The loss of sealability caused by the SCC has to be avoided. To evaluate the SCC for the canister, it is necessary to make clear the amount of the sea salt particles coming into the storage building and the concentration on the canister. In present, the evaluation on that point is not sufficient. In this study, the concentration of the sea salt particles in the air and on the surface of the storage facility are measured inside and outside of the building. For the measurement, two sites of the dry storage facility using the metal cask are chosen. This data is applicable for the evaluation on the SCC of the canister to realize the interim storage using the concrete overpack.

scholarly journals Materials and Environment of Interim Storage Container for Spent Nuclear Fuel

2004 ◽  
Vol 53 (5) ◽  
pp. 246-249 ◽  
Author(s):  
Toshiari Saegusa ◽  
Masami Mayuzumi
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Storage Container ◽  
Interim Storage

scholarly journals COMPARATIVE ANALYSIS OF NUMERICAL METHODS USED FOR THERMAL MODELING OF SPENT NUCLEAR FUEL DRY STORAGE SYSTEMS

2019 ◽  
pp. 75-79
Author(s):  
S. Alyokhina ◽  
Y. Matsevity ◽  
V. Dudkin ◽  
R. Poskas ◽  
A. Sirvydas ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Nuclear Fuel ◽  
Nuclear Energy ◽  
Storage Time ◽  
Spent Nuclear Fuel ◽  
Storage Systems ◽  
Storage Technology ◽  
Dry Storage ◽  
Fuel Storage ◽  
Interim Storage

Management of spent nuclear fuel is a very important part in the whole cycle of nuclear energy generation. Usually “dry” storage technology in casks is selected for the interim storage of spent nuclear fuel for up to 50 years after pre-storage time in water pools. In this paper, two case studies were carried out to highlight the differences and similarities between Ukraine and Lithuania in spent nuclear fuel storage.

Sign in / Sign up

Export Citation Format

Share Document