scholarly journals A New Structural Damage Identification Method Based on Wavelet Packet Energy Entropy of Impulse Response

2015 ◽  
Vol 9 (1) ◽  
pp. 570-576 ◽  
Author(s):  
Can He ◽  
Jianchun Xing ◽  
Juelong Li ◽  
Wei Qian ◽  
Xun Zhang
Keyword(s):  
Impulse Response ◽  
Structural Damage ◽  
Damage Identification ◽  
Wavelet Packet ◽  
Damage Index ◽  
Great Influence ◽  
Identification Method ◽  
Wavelet Energy ◽  
Energy Entropy ◽  
Structural Damage Identification

Excitation makes a great influence on the wavelet energy distribution of the response signal, this deficiency leads that the traditional structural damage identification method based on wavelet energy has a low precision. In order to solve this problem, a new structural damage identification method based on wavelet packet energy entropy (WPEE) of impulse response is presented in this paper. Firstly, natural excitation technique (NExT) is adopted to extract structural impulse response. Then, WPEE of the impulse response is computed, and the change rate of WPEE is used to construct the structural damage index. An experiment of damage identification on a pile structure is provided to verify the effectiveness of the proposed method. Experiment results show that this method can accurately identify the single damage and multi-damage.

scholarly journals A Mahalanobis Distance Cumulant-Based Structural Damage Identification Method with IMFs and Fitting Residual of SHM Measurements

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Chuang Chen ◽  
Yinhui Wang ◽  
Tao Wang ◽  
Xiaoyan Yang
Keyword(s):  
Mahalanobis Distance ◽  
Structural Damage ◽  
Damage Identification ◽  
Feature Vector ◽  
Recursive Algorithm ◽  
Intrinsic Mode Functions ◽  
Data Set ◽  
Identification Method ◽  
Structural Damage Identification ◽  
Emd Method

Data-driven damage identification based on measurements of the structural health monitoring (SHM) system is a hot issue. In this study, based on the intrinsic mode functions (IMFs) decomposed by the empirical mode decomposition (EMD) method and the trend term fitting residual of measured data, a structural damage identification method based on Mahalanobis distance cumulant (MDC) was proposed. The damage feature vector is composed of the squared MDC values and is calculated by the segmentation data set. It makes the changes of monitoring points caused by damage accumulate as “amplification effect,” so as to obtain more damage information. The calculation method of the damage feature vector and the damage identification procedure were given. A mass-spring system with four mass points and four springs was used to simulate the damage cases. The results showed that the damage feature vector MDC can effectively identify the occurrence and location of the damage. The dynamic measurements of a prestress concrete continuous box-girder bridge were used for decomposing into IMFs and the trend term by the EMD method and the recursive algorithm autoregressive-moving average with the exogenous inputs (RARMX) method, which were used for fitting the trend term and to obtain the fitting residual. By using the first n-order IMFs and the fitting residual as the clusters for damage identification, the effectiveness of the method is also shown.

Non-model-based damage identification of plates using measured mode shapes

2016 ◽  
Vol 16 (1) ◽  
pp. 3-23 ◽  
Author(s):  
Yongfeng Xu ◽  
Weidong Zhu
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Damage Index ◽  
Thickness Reduction ◽  
Aluminum Plate ◽  
Mode Shapes ◽  
Identification Method ◽  
Model Based

Mode shapes (MSs) have been extensively used to detect structural damage. This paper presents a new non-model-based damage identification method that uses measured MSs to identify damage in plates. A MS damage index (MSDI) is proposed to identify damage near regions with consistently high values of MSDIs associated with MSs of different modes. A MS of a pseudo-undamaged plate can be constructed for damage identification using a polynomial of a properly determined order that fits the corresponding MS of a damaged plate, if the associated undamaged plate is geometrically smooth and made of materials that have no stiffness and mass discontinuities. It is shown that comparing a MS of a damaged plate with that of a pseudo-undamaged plate is better for damage identification than with that of an undamaged plate. Effectiveness and robustness of the proposed method for identifying damage of different positions and areas are numerically investigated using different MSs; effects of crucial factors that determine effectiveness of the proposed method are also numerically investigated. Damage in the form of a machined thickness reduction area was introduced to an aluminum plate; it was successfully identified by the proposed method using measured MSs of the damaged plate.

Pseudo Strain Energy Density-Based Structural Damage Identification

2009 ◽  
Vol 413-414 ◽  
pp. 71-78
Author(s):  
Xiao Qiang Chen ◽  
Hong Ping Zhu ◽  
Dan Sheng Wang
Keyword(s):  
Energy Density ◽  
Strain Energy Density ◽  
Structural Damage ◽  
Strain Energy ◽  
Damage Identification ◽  
Wavelet Packet ◽  
Damage Index ◽  
Dynamic Strain ◽  
Beam Model ◽  
Measured Strain

In this paper, a new time-domain method for detecting structural local damage has been developed, which is based on the measured strain signals. The “pseudo strain energy density (PSED)” is defined and used to build two major damage indexes, the “average pseudo strain energy density” (APSED) and the “average pseudo strain energy density changing rate” (APSEDR). A probability and mathematical statistics technique is utilized to derive a standardized damage index. Afterwards, these indexes are used to establish the damage identification strategies for beam structures and plate structures respectively. Furthermore, the wavelet packet transform is used to pre-process the measured dynamic strain signals. Then, the effectivity of the new damage identification method is confirmed by numerical simulations. Finally, a laboratory beam model experiment is conducted to verify this method examine the feasibility and applicability of the new method.

scholarly journals Damage Identification Investigation of Retaining Wall Structures Based on a Virtual Impulse Response Function

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Qian Xu
Keyword(s):  
Impulse Response ◽  
Response Function ◽  
Frequency Band ◽  
Damage Identification ◽  
Wavelet Packet ◽  
Retaining Wall ◽  
Damage Index ◽  
Impulse Response Function ◽  
Energy Ratio ◽  
Wall Structures

To eliminate the influence of excitation on the wavelet packet frequency band energy spectrum (ES), ES is acquired via wavelet packet decomposition of a virtual impulse response function. Based on ES, a character frequency band vector spectrum and damage eigenvector spectrum (DES) are created. Additionally, two damage identification indexes, the energy ratio standard deviation and energy ratio variation coefficient, are proposed. Based on the damage index, an updated damage identification method for retaining wall structures is advanced. The damage state of a retaining wall can be diagnosed through DES, the damage location can be detected through the damage index trend surface, and the damage intensity can be identified by establishing a quantitative relationship between the damage intensity and damage index. To verify the feasibility and validity of this damage identification method, a vibration test on a pile plate retaining wall is performed. Test results demonstrate that it can distinguish whether the retaining wall is damaged, and the location of partial damage within the retaining wall can be easily detected; in addition, the damage intensity of the wall can also be identified validly. Consequently, this damage identification theory and method may be used to identify damage within retaining wall structures.

Sign in / Sign up

Export Citation Format

Share Document