scholarly journals Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

2015 ◽  
Vol 9 (1) ◽  
pp. 267-272 ◽  
Author(s):  
Georgia E. Nikoloudaki ◽  
Taxiarchis G. Kontogiannis ◽  
Nikolaos P. Kerezoudis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Greek Population ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Permanent Molars ◽  
Canal Morphology

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral & Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography.Materials and Methods:273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed.Results:A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth.Conclusion:Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment.

scholarly journals Evaluation of the root and canal morphology of mandibular permanent molars in a south-eastern Turkish population using cone-beam computed tomography

2014 ◽  
Vol 08 (02) ◽  
pp. 154-159 ◽  
Author(s):  
Bilge Gulsum Nur ◽  
Evren Ok ◽  
Mustafa Altunsoy ◽  
Osman Sami Aglarci ◽  
Mehmet Colak ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Turkish Population ◽  
Cone Beam ◽  
Type I ◽  
Second Molar ◽  
Mandibular Molars ◽  
Permanent Molars ◽  
Canal Morphology

ABSTRACT Objective: The aim of this retrospective study was to determine the root and canal morphology of the mandibular first and second permanent molars in a Turkish population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of mandibular first (n = 966) and second molar (n = 1165) teeth from 850 Turkish patients were evaluated. The root canal configurations were classified according to the method of Vertucci. The data were analyzed by Pearson's Chi-square test. Results: The majority of mandibular molars were two rooted with three canals; however, three roots were identified in 0.05% of the first molars and 0.01% of the second molars, and 100% of the additional root canals were of type I configuration. Mesial roots had more complex canal systems with more than one canal, whereas most distal roots had a type I configuration. Conclusions: Within the limitations of this study, it can be concluded that CBCT scanning provides supplemental information about the root canal configurations of mandibular molars in a Turkish population. This study may help clinicians in the root canal treatment of mandibular molars.

scholarly journals Cone Beam Computed Tomography Evaluation of Root Canal Anatomy in Primary Molars: An in vitro Study

2017 ◽  
Vol 1 (1) ◽  
pp. 15-19
Author(s):  
Neelam Joshi ◽  
Anshula Deshpande ◽  
KS Poonacha ◽  
Seema Bargale ◽  
Kishan Naik ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Primary Molars ◽  
Second Molar ◽  
Root Canals ◽  
Root Canal Anatomy ◽  
Canal Morphology

ABSTRACT Introduction Endodontic treatment requires knowledge of root canal morphology and its commonly occurring variation. The utility and relevance of cone beam computed tomography (CBCT) to the practice of endodontics is reported with increasing frequency in the field of endodontics for successful procedures. Therefore, the present study is undertaken to assess the variation in number and morphology of the root canals of primary molars. Materials and methods Extracted primary molars with at least two-thirds of intact root, and 7 to 12 mm length were cleaned in water and stored in 0.5% sodium hypochlorite for 1 week. Thereafter, the anatomy of the root canals of these primary molars was assessed through CBCT. Results In the present study, the majority of canals were ribbon shaped. Accessory canals were few and maximum number was found to be present in mesiobuccal root of maxillary first molar and the least in mesiobuccal root of mandibular second molar. Conclusion The CBCT proved to be as accurate as the gold standard in studying the presence of accessory canals with clinical applicability. This study highlights the usefulness of CBCT imaging for accurate diagnosis of the unusual canal morphology. How to cite this article Joshi N, Deshpande A, Poonacha KS, Bargale S, Naik K, Mehta D. Cone Beam Computed Tomography Evaluation of Root Canal Anatomy in Primary Molars: An in vitro Study. Int J Clin Dent Res 2017;1(1):15-19.

scholarly journals Cone-beam computed tomography study of tooth root and canal morphology of permanent molars in a Serbian population

2020 ◽  
Vol 77 (5) ◽  
pp. 470-478
Author(s):  
Milica Popovic ◽  
Suzana Zivanovic ◽  
Tamara Vucicevic ◽  
Miona Grujovic ◽  
Milos Papic
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Type I ◽  
Second Molar ◽  
Mandibular Molars ◽  
Permanent Molars ◽  
Root Canal Morphology ◽  
Canal Morphology

Background/Aim. For successful endodontic therapy, it is necessary to know root morphology. Therefore, the aim of our study was to analyze root canal morphology and root canal length of permanent molars in a Serbian population, using cone-beam computed tomography (CBCT). Methods. The study included a total of 305 maxillary molars, and 280 mandibular molars receiving cone-beam computed tomography examination and determined root numbers, canal morphology according to Vertucci classification, and canal lengths. Results were correlated with sex and tooth location in the jaw. Results. The mesiobuccal roots of first maxillary molars showed Vertucci type I in 45.7%, followed by type II in 29% of cases. For the second molar, Vertucci type I was found in 60.5% of cases in mesiobuccal canals. Palatal and distobuccal canals mostly presented Vertucci type I configuration. The mesial roots of mandibular molars had the highest frequency of two canals with Vertucci type IV as the most frequent for the first molar, and Vertucci type II for the second molar. Distal roots most commonly had one canal in both molars. Palatal canal length was the highest in maxillary first molars, with the mean value of 20.62 mm, while in second molars, the highest length value was for the mesiobuccal canal (20.09 mm). In both mandibular molars the mesial root canal was the longest one. Differences were found according to sex and tooth location in the jaw. Conclusion. Mesiobuccal roots of maxillary first molars had two canals; it was more frequently compared to second molars. Mesial roots of mandibular molars showed same frequency of two canals, and diversity in Vertucci types. Male patients tended to have higher complexity of root canal morphology compared to that of females. CBCT can improve understanding of the root canal morphology.

MANAGEMENT OF C-SHAPED CANAL IN MANDIBULAR SECOND MOLAR: A CASE REPORT

2021 ◽  
pp. 66-68
Author(s):  
Shivangi Shreya ◽  
C.K. Wang
Keyword(s):  
Computed Tomography ◽  
Case Report ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Unusual Case ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Canal Systems ◽  
Mandibular Second Molar

Variations of root canal systems need not always be in the form of extra canals. Clinicians should be aware that there is a possibility of existence of fewer numbers of roots and root canals than normal, which presents varied canal anatomy and poses a challenge to the clinician's expertise. This case report deals with the management of an unusual case of C-shaped canal in mandibular second molar. Cone-beam computed tomography (CBCT) was employed to conrm the extension of the unusual anatomy. 3-D Obturation done with the help of thermoplastic obturation unit.

scholarly journals Cone Beam Computed Tomography a Noval Innovation for assessing the Canal Morphology of Maxillary First Bicuspid

2017 ◽  
Vol 2 (1) ◽  
pp. 4-7
Author(s):  
M Remya ◽  
VP Prabath Singh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
High Incidence ◽  
Study Population ◽  
Root Canal Morphology ◽  
Canal Morphology

ABSTRACT Aim To evaluate the root canal morphology of maxillary first premolar using Cone beam computed tomography (CBCT). Materials and methods A total of 125 teeth were selected and CBCT scans were taken and following factors were recorded – number of roots, number of root canals, anatomy, and configuration of canals. Results Overall 88% teeth had two roots. Most frequent canal configuration was type I in 93.6%; 94.4% teeth had single canal exiting in single apical foramen. Conclusion Within the limitation of the study, it was concluded that among the study population, there is a high incidence of two-rooted maxillary first bicuspid with two canals with type I Vertucci canal configuration. How to cite this article Remya M, Singh VPP. Cone Beam Computed Tomography a Noval Innovation for assessing the Canal Morphology of Maxillary First Bicuspid. Cons Dent Endod J 2017;2(1):4-7.

scholarly journals Morphology of Maxillary First Molars Analyzed by Cone-Beam Computed Tomography among Malaysian: Variations in the Number of Roots and Canals and the Incidence of Fusion

2020 ◽  
Vol 16 (2) ◽  
Author(s):  
Aws Hashim Al-Kadhim ◽  
Zainul Ahmad Rajion ◽  
Normaliza AB Malik ◽  
Azlan Jaafar
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Bilateral Symmetry ◽  
Cone Beam ◽  
Root Canals ◽  
Initial Identification ◽  
Root Canal Morphology ◽  
Canal Morphology

Introduction: A few studies investigated the numerous potential endodontic uses of CBCT, including the examination of root canal morphology and presumed that CBCT was effective for the initial identification of such morphology; moreover CBCT is a reliable method for the detection of the MB2 canal when compared with the gold standard of physical sectioning of the specimen. The aim of this study was to identify the root and canal morphology of the maxillary first molars among Malaysians analysed by cone-beam computed tomography (CBCT) images. Materials and Methods: Maxillary first (n = 421) molars from Malaysian patients (n = 241) of Malay, Chinese and Indians inceptions were examined by two Endodontists using in vivo CBCT methods. The number and configuration of roots, the number of root canals, and the canal configuration according to Vertucci’s classification were determined. Results: Single roots were not found in maxillary first molars. The incidence of fused roots was 1.995% in the first molars between mesiobuccal and distobuccal roots. In (421) 3-rooted maxillary first molars, additional canals were found in 45.6% of the mesiobuccal (MB) roots and 0% of the distobuccal (DB) roots. Bilateral symmetry of the MB roots was found in 82.36% of the first molar. Only one tooth was found to have pulp stone inside the pulp chamber. Conclusions: The root and canal configuration of a Malaysian population showed different features from those of other populations. CBCT scans can enhance the understanding of root canal anatomy, with the potential of improving the outcome of endodontic treatment.

scholarly journals Endodontic management of mandibular second molar with Vertucci II canal configuration using Cone Beam Computed Tomography

2017 ◽  
pp. 11-13
Author(s):  
Nagaveni NB ◽  
Meghna Bajaj ◽  
Sneha Yadav ◽  
Poornima P
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Three Dimensional ◽  
The Other ◽  
Cone Beam ◽  
Root Number ◽  
Second Molar ◽  
Root Canals ◽  
Mandibular Second Molar ◽  
Canal Morphology

Permanent mandibular second molars usually show two roots, one mesial and the other distal root with four root canals (two mesial and two distal canals). Variation in root number and canal morphology rarely occur in these teeth. Cone Beam Computed Tomography is a new advent in the diagnostic field which provides three dimensional clear picture of the root/canal. The present article describes the endodontic management of permanent mandibular left second molar with Vertucci II canal configuration using cone beam computed tomography.

scholarly journals Anatomic symmetry of root and root canal morphology of posterior teeth in Indian subpopulation using cone beam computed tomography: A retrospective study

2015 ◽  
Vol 09 (04) ◽  
pp. 500-507 ◽  
Author(s):  
Gnanasekaran Felsypremila ◽  
Thilla Sekar Vinothkumar ◽  
Deivanayagam Kandaswamy
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Posterior Teeth ◽  
Second Molar ◽  
Root Canals ◽  
Maxillary Premolars ◽  
Root Canal Morphology ◽  
Maxilla And Mandible ◽  
Canal Morphology

ABSTRACT Objective: To investigate the anatomic symmetry of maxillary and mandibular posteriors in Indian subpopulation using cone beam computed tomography (CBCT). Materials and Methods: CBCT images of 246 patients that had at least one noncarious, posterior tooth free of restorations in each quadrant were enrolled for retrospective analysis. A total of 3015 teeth (811 maxillary premolars, 845 mandibular premolars, 738 maxillary molars, and 621 mandibular molars) were analyzed for number of roots and root canals, canal morphology and anatomic symmetry, and concurrent types between the maxilla and mandible. Results: There was no difference in the percentage of symmetry for maxillary first (81.5%) and second (81.5%) premolars. Mandibular second premolars (98.3%) exhibited greater symmetry than mandibular first premolars (96.1%). First molars (77.5% and 82.1%) showed greater symmetry than second molars (70.8% and 78.6%), in both maxillary and mandibular arches, respectively. The most common anatomy observed were: maxillary first premolars – 2 roots with 2 canals, maxillary second premolars – 1 root with 2 canals, mandibular first and second premolars – 1 root with 1 canal, maxillary first and second molars – 3 roots with 4 canals, and mandibular first and second molars – 2 roots with 3 canals. When compared with any other teeth, maximum asymmetry was observed in maxillary second molar (29.2%). Conclusion: The percentage of symmetry observed in the present study varied from 70% to 98% with least percentage of symmetry in maxillary second molars. These data should alert the clinicians while treating homonymous teeth of the same patient.

scholarly journals Evaluation of Distolingual Canal/Roots in Mandibular Molars and Mesiobuccal Canals in Maxillary Molars by CBCT

2017 ◽  
Vol 11 (1) ◽  
pp. 360-366 ◽  
Author(s):  
Filiz Namdar Pekiner ◽  
M. Oğuz Borahan ◽  
Asım Dumlu
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Patient Age ◽  
Root Canals ◽  
Mandibular Molars ◽  
Maxillary Molars ◽  
Distolingual Canal

Background/Purpose: The objectives of this study were to identify the bilateral distolingual (DL) canals / roots of the mandibular first molars and second mesiobuccal (MB2) canals of the maxillary first molars in the same Turkish individuals using cone-beam computed tomography (CBCT). Materials and Methods: A total of 150 CBCT images including all mandibular and maxillary first molars were retrospectively investigated in a Turkish subpopulation. The patient age, sex and presence of roots and root canals were assessed. The frequency, of bilateral DL canals, DL roots, and MB2 canals were reviewed. Data were analyzed using Fisher’sexact test and Chi-square test. Results: The prevalences of right DL canals, DL roots and MB2 canals were 31.3, 14.0 and 34.7%, respectively. The prevalences of left DL canals, DL roots and MB2 canals were 31.3, 4 and 27.3%, respectively. There was no statistically difference in the frequency of right and left DL canals, DL roots of mandibular first molars and MB2 canals of maxillary first molars according to gender. Conclusion: CBCT is a competent tool for the detection of additional distolingual canals/roots and second mesio buccal canals, and it is a valuable aid for dentists providing root canal treatment.

Sign in / Sign up

Export Citation Format

Share Document