scholarly journals Межфазные напряжения и аномальный вид кривых псевдоупругой деформации в кристаллах сплава Ni-=SUB=-49-=/SUB=-Fe-=SUB=-18-=/SUB=-Ga-=SUB=-27-=/SUB=-Co-=SUB=-6-=/SUB=-, деформированных сжатием в направлении оси [011]-=SUB=-A-=/SUB=-

2019 ◽  
Vol 89 (6) ◽  
pp. 873
Author(s):  
Г.А. Малыгин ◽  
В.И. Николаев ◽  
В.М. Крымов ◽  
С.А. Пульнев ◽  
С.И. Степанов

AbstractWe have performed experimental and theoretical investigation of the anomalous form of the compression diagrams and shape memory restoration curves in Ni_49Fe_18Ga_27Co_6 alloy crystals deformed by uniaxial compression along the [011]_ A crystallographic direction ( A -austenite) in the temperature range of 200–350 K. It is found that in the investigated temperature range, all compression diagrams contain anomalous segments of smooth and sharp decrease in deforming stresses. It is shown that the segments of a smooth decrease in stress are associated with peculiarities in martensite reaction L1_2 → 14M, while segments of a sharp drop are due to instability of martensite reactions 14M → L1_0 and L1_2 → L1_0. A possible source of reaction instability is associated with interfacial stresses at the interfaces between the martensite and austenite phases (lamellas) due to different elastic moduli of contacting phases. The magnitude of these stresses is significant in the case of 14M → L1_0 and L1_2 → L1_0 transformations, which induces a sharp drop of the deforming stress, while the restoration of the shape memory effect is of a burst nature. It is established that the contribution of interfacial stresses to the free energy of martensite transformation is smaller than the dissipative (entropy) contribution to this energy; however, interfacial stresses higher than a certain threshold strongly affect transformation kinetics and, hence, determine the strongly anomalous shape of pseudoelastic deformation curves and burst restoration of the shape memory effect.

Author(s):  
А.Н. Моногенов ◽  
В.Э. Гюнтер ◽  
Е.С. Марченко ◽  
С.Г. Аникеев ◽  
В.Н. Ходоренко ◽  
...  

A study of martensitic transformations and characteristics of the shape memory effect of medical alloys (TH-10) alloyed with aluminum up to 4 at.% Al long the TiNiMo-TiMeMo section was carried out. Aluminum has a fairly smooth effect on the temperatures of the beginning and end of the direct and reverse martensitic transformation, as well as similar characteristics under load, which makes it possible to use alloying with aluminum as a method for controlling the temperature range of shape change with the shape memory effect.


Author(s):  
F. I. Grace

An interest in NiTi alloys with near stoichiometric composition (55 NiTi) has intensified since they were found to exhibit a unique mechanical shape memory effect at the Naval Ordnance Laboratory some twelve years ago (thus refered to as NITINOL alloys). Since then, the microstructural mechanisms associated with the shape memory effect have been investigated and several interesting engineering applications have appeared.The shape memory effect implies that the alloy deformed from an initial shape will spontaneously return to that initial state upon heating. This behavior is reported to be related to a diffusionless shear transformation which takes place between similar but slightly different CsCl type structures.


2003 ◽  
Vol 112 ◽  
pp. 1177-1180 ◽  
Author(s):  
A. Schuster ◽  
H. F. Voggenreiter ◽  
D. C. Dunand ◽  
G. Eggeler

2003 ◽  
Vol 112 ◽  
pp. 765-768 ◽  
Author(s):  
Y. Bellouard ◽  
R. Clavel ◽  
R. Gotthardt ◽  
J. van Humbeeck

Sign in / Sign up

Export Citation Format

Share Document