scholarly journals Adaptive terminal sliding mode control of a rigid robotic manipulator with uncertain dynamics incorporating constraint inequalities

2002 ◽  
Vol 43 ◽  
pp. 102 ◽  
Author(s):  
P. G. Keleher ◽  
R. J. Stonier
2019 ◽  
Vol 9 (9) ◽  
pp. 1756 ◽  
Author(s):  
Doan ◽  
Le ◽  
Vo

The control of a parallel robotic manipulator with uncertain dynamics is a noteworthy challenge due to the complicated dynamic model; multi-closed-loop chains; and singularities. This study develops a Synchronization Full-Order Terminal Sliding Mode Control (S-FOTSMC) for a 3-DOF planar parallel robotic manipulator with uncertain dynamics. First, to achieve faster convergence of position error and synchronization error variables with minimum values at the same time, a Synchronization Full-Order Terminal Sliding Mode Surface (S-FOTSMS) is constructed in the cross-coupling error’s state space. Next; an integral of the switching control term is applied; that means, a continuous control term is extended for rejecting the effects of chattering. Finally, an SFOTSMC is designed to guarantee that sliding mode motion will occur. Consequently, the stability and the robustness of the proposed method are secured with high-performance irrespective of the influences of uncertain terms in the robot system. The simulation performances show the effectiveness of our proposed system for position tracking control of a 3-DOF planar parallel robotic manipulator.


Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Yang Wang ◽  
Mingshu Chen ◽  
Yu Song

This paper concentrates on the predefined-time trajectory tracking for an uncertain robotic manipulator system. First, a modified predefined-time control (PTC) algorithm is proposed. Subsequently, with the help of proposed modified PTC algorithm and the nonsingular design method of terminal sliding mode, a novel nonsingular terminal sliding-mode control (NTSMC) scheme is proposed for ensuring the predefined-time convergence of tracking errors. The advantages of the newly proposed control scheme are as follows. (i) Unlike the conventional predefined-time sliding-mode control (SMC) which only guarantees the predefined-time convergence of sliding-mode surface, the proposed scheme can guarantee the predefined-time convergence of tracking errors. (ii) Compared with the conventional PTC algorithm, the proposed modified PTC algorithm can reduce the initial control peaking and enhance the precision of convergence time. The performance and effectiveness of the proposed control scheme are illustrated by comparing with the existing methods.


Sign in / Sign up

Export Citation Format

Share Document