The modification of acrylic denture base resin as materials for artificial teeth: Effect of hydroquinone and methyl methacrylate monomer

Aim: The aim of this study was to evaluate the bond strength of artificial teeth to different types of denture base resins when submitted to thermomechanical cycling (TMC). Methods: Sixty artificial mandibular first molars (Trilux, Vipi) were randomly divided into 3 groups according to denture base acrylic resins (Vipi Wave, Vipi Cril, and Vipi Cril Plus, Vipi). The teeth were fixed onto self-polymerizing acrylic resin bars (0.5 cm2 cross-section x 2 cm height), and the set was included in a metal flask using dental stone/silicone. After the dental stone was set, the bar was removed, and the denture base resin was packed and processed according to the group studied (Vipi Wave: 180 W/20 minutes + 540W/5 minutes; Vipi Cril and Vipi Cril Plus: Water bath at 74ºC for 9h). After polymerization, the samples were divided into 2 groups (n=10), according to the TMC treatment received (simulation of 5 years of mastication or not). The samples were submitted to tensile bond strength test (1 mm/min), and the data (MPa) were statistically analyzed (2-way ANOVA, Bonferroni, α=0.05). The fracture interfaces were evaluated using a stereomicroscope (50x). Results: The bond strength results showed no statistically significant difference (p>0.05) between the resins studied. TMC was significant (p<0.05), demonstrating lower values for the bond strength of artificial teeth to Vipi Cril Plus. The predominant fracture type was cohesive in resin. Conclusions: It was concluded that there is no difference in bond strength between artificial teeth and the resins used for denture base. However, TMC decreases the bond strength values of artificial teeth and crosslink thermo-polymerizable acrylic resin.

Download Full-text

Comparison of Bond Strength of Acrylic, Composite, and Nanocomposite Artificial Teeth to Heat-Cure Acrylic Denture Base Resin

Frontiers in Dentistry ◽

10.18502/fid.v16i3.1587 ◽

2019 ◽

Author(s):

Tahereh Ghaffari Gharebagh ◽

Fahimeh Hamedirad ◽

Keyvan Miruzadeh

Keyword(s):

Bond Strength ◽

Shear Bond Strength ◽

Tooth Surface ◽

Denture Base ◽

Heat Cure ◽

Base Resin ◽

Bond Strengths ◽

The Mean ◽

Artificial Teeth ◽

Denture Base Resin

Objectives: The present study aimed to evaluate the bond strength of heat-cure denture base resin to newly designed Iranian artificial acrylic teeth. Materials and Methods: In this in-vitro experimental study, shear bond strengths of Ivoclar acrylic, Apple composite, and B-Star nanocomposite teeth to heat-cure acrylic denture base resin were compared. A total of 18 samples were selected from each group of teeth. The samples were attached to heat-cure resin according to ISO 10477 standard. For the assessment of bond strength, the samples were placed in a universal testing machine and were subjected to shear forces at a speed of 1 mm/minute to record the fracture load. Descriptive statistics, including frequency, mean, and standard deviation, were calculated using SPSS 20 software. Two-way analysis of variance was used to compare the shear bond strength of the groups with and without monomers and the studied artificial teeth. Results: The mean shear bond strengths of Ivoclar acrylic teeth were 392.22±23.76 MPa and 337.11±32.18 MPa with and without adding monomers to the tooth surface, respectively. The mean shear bond strengths were 250.44±29.84 MPa and 238.33±27.28 MPa (without monomers) and 438.33±24.16 MPa and 311.56±32.78 MPa (with monomers) for Apple composite and B-Star nanocomposite artificial teeth, respectively. Conclusion: The greatest shear bond strength was attributed to Ivoclar acrylic teeth followed by Apple composite and B-Star nanocomposite artificial teeth. Addition of monomers to the tooth surface significantly strengthened the shear bonding of acrylic base resin to the teeth.

Download Full-text