scholarly journals Dentoskeletal changes following mini-implant molar intrusion in anterior open bite patients

2015 ◽  
Vol 85 (6) ◽  
pp. 941-948 ◽  
Author(s):  
Tyler R. Hart ◽  
Richard R. J. Cousley ◽  
Leonard S. Fishman ◽  
Ross H. Tallents
Keyword(s):  
Observation Time ◽  
Open Bite ◽  
Occlusal Plane ◽  
Plane Angle ◽  
Anterior Open Bite ◽  
Mini Implants ◽  
Molar Intrusion ◽  
Adolescent Patients ◽  
Maxillary Molar ◽  
Cephalometric Study

ABSTRACT Objective:  To evaluate skeletal and dental changes after intrusion of the maxillary molars in subjects with anterior open bite. Materials and Methods:  This retrospective cephalometric study evaluated skeletal and dental changes resulting from the use of maxillary orthodontic mini-implants in 31 consecutively treated patients. Radiographs were taken at the start and end of maxillary molar intrusion to evaluate the associated changes. Statistical analysis was performed using a one-sample t-test. Results:  The mean treatment observation time was 1.31 years (SD  =  2.03). The maxillary first molars (P  =  0.0026) and second molars (P  =  0.039) were intruded. However, the mandibular first molars (P  =  0.0004) and second molars (P  =  0.003) erupted in adolescent patients. Both the maxillary and mandibular first molars inclined distally (P  =  0.025 and P  =  0.044, respectively). The mandibular plane angle decreased (P  =  0.036), lower facial height decreased (P  =  0.002), and the occlusal plane angle increased (P  =  0.009). The overbite increased (P < .0001). The ANB angle decreased (P < .0001). Mandibular dental and skeletal changes were more apparent in adolescents, while adults tended toward maxillary changes. Conclusions:  Vertical traction from orthodontic mini-implants reduces the maxillary posterior dentoalveolar height, thereby assisting orthodontic closure of anterior open bite. However, simultaneous eruption or extrusion of the mandibular molars should be controlled. Adolescent patients tend to demonstrate more favorable effects of mandibular autorotation than do adults.

scholarly journals Optimization of Loading Condition for Maxillary Molar Intrusion with Midpalatal Miniscrews by Using Finite Element Analysis

2021 ◽  
Vol 11 (24) ◽  
pp. 11749
Author(s):  
Ornnicha Pooktuantong ◽  
Takeshi Ogasawara ◽  
Masayoshi Uezono ◽  
Pintu-on Chantarawaratit ◽  
Keiji Moriyama
Keyword(s):  
Finite Element ◽  
Open Bite ◽  
Unit Load ◽  
Anterior Open Bite ◽  
Element Analysis ◽  
Molar Intrusion ◽  
Apical Direction ◽  
Root Injury ◽  
Maxillary Molar ◽  
Transpalatal Arch

An anterior open bite is one of the most difficult malocclusions in orthodontic treatment. For such malocclusion, orthodontic miniscrew insertion into both buccal and palatal alveolar regions has been indicated for molar intrusion, but it involves a risk of tooth root injury. To solve the problem, a midpalatal miniscrew-attached extension arm (MMEA) is adopted. However, this method causes palatal tipping of the molar because intrusive loads were applied only from the palatal side. Currently, a transpalatal arch is added to avoi0d tipping movement, but it induces the patient’s discomfort. Hence, the objective of this study was to evaluate the loading conditions for maxillary molar intrusion without tipping movement, only by MMEA through finite element (FE) analysis. FE models of maxillary right first molar and surrounding tissues were created. Three hook positions of MMEA were set at 6.0 mm perpendicular intervals in the occluso-apical direction along the mucosal contour. An intrusive unit load was applied from the palatal side of the molar, and various counter loads were applied from the buccal side. An optimal counter load for molar intrusion without palatal tipping was observed in each hook position. In conclusion, an ideal maxillary molar intrusion can be achieved only by MMEA with an optimal counter load.

scholarly journals Prediction of mandibular movement and its center of rotation for nonsurgical correction of anterior open bite via maxillary molar intrusion

2018 ◽  
Vol 88 (5) ◽  
pp. 538-544 ◽  
Author(s):  
Kyunam Kim ◽  
Kwangchul Choy ◽  
Young-Chel Park ◽  
Seo Yeon Han ◽  
Heekyu Jung ◽  
...  
Keyword(s):  
Linear Regression Analysis ◽  
Open Bite ◽  
Reference Plane ◽  
Mandibular Movement ◽  
Anterior Open Bite ◽  
Counterclockwise Rotation ◽  
Molar Intrusion ◽  
Lateral Cephalograms ◽  
Maxillary Molar ◽  
The Relationship

ABSTRACT Objectives: To evaluate quantitatively the relationship between molar intrusion (change [Δ] maxillary first molar [U6]–palatal plane [PP]) and changes in vertical and sagittal cephalometric parameters and to determine the center of mandibular autorotation. Materials and Methods: Twenty-one patients diagnosed with anterior open bite and successfully treated with molar intrusion (overbite [OB] > 0 mm) were retrospectively enrolled. Lateral cephalograms taken before and after molar intrusion were used to measure changes in vertical and sagittal cephalometric parameters. The center of mandibular autorotation was calculated by measuring displacement of gonion (Go) and pogonion (Pog). Paired t-tests were used to compare variables, and linear regression analysis was used to examine the relationship between ΔU6-PP and other variables. Results: The mandible exhibited counterclockwise rotation after maxillary molar intrusion, which led to closure of anterior open bite. Strong linear relationships, in descending order, between ΔU6-PP and ΔOB, Δanterior facial height (AFH), Δvertical reference plane (Pog), and Δsella-nasion to Go-menton (SN-GoMe), were observed. When the maxillary molar was intruded 1 mm, OB increased by 2.6 mm, AFH decreased by 1.7 mm, Pog moved forward by 2.3 mm, and SN-GoMe decreased by 2°. The center of mandibular autorotation was located 7.4 mm behind and 16.9 mm below condylion after molar intrusion. Conclusions: The mandible exhibited counterclockwise rotation after maxillary molar intrusion; the center of mandibular autorotation was located behind and below condylion with individual variations.

Nonsurgical correction of a severe anterior open bite with mandibular molar intrusion using mini-implants and the multiloop edgewise archwire technique

2018 ◽  
Vol 153 (4) ◽  
pp. 577-587 ◽  
Author(s):  
Benedito Viana Freitas ◽  
Mayara Cristina Abas Frazão ◽  
Luana Dias ◽  
Pedro César Fernandes dos Santos ◽  
Heloiza Viana Freitas ◽  
...  
Keyword(s):  
Open Bite ◽  
Anterior Open Bite ◽  
Mini Implants ◽  
Molar Intrusion ◽  
Mandibular Molar ◽  
Nonsurgical Correction

scholarly journals Anterior open bite: cephalometric evaluation of the dental pattern

2006 ◽  
Vol 17 (1) ◽  
pp. 68-70 ◽  
Author(s):  
Adriana Sasso Stuani ◽  
Andréa Sasso Stuani ◽  
Maria Bernadete Sasso Stuani ◽  
Maria da Conceição Pereira Saraiva ◽  
Mírian Aiko Nakane Matsumoto
Keyword(s):  
Open Bite ◽  
Occlusal Plane ◽  
Anterior Open Bite ◽  
Panoramic Radiographs ◽  
Lateral Cephalograms ◽  
Significant Difference ◽  
Dental Origin ◽  
Dental Pattern ◽  
Mandibular Incisors

The purpose of this study was to compare the dental pattern of patients with anterior open bite malocclusion to that of individuals with normal overbite by utilization of lateral cephalograms, panoramic radiographs and study casts. The findings showed that there was no significant difference in the inclination of the occlusal plane (SN.PlO) and position of the maxillary and mandibular incisors (1-NA, 1-NB) between both groups of individuals; but the angles of inclination of the maxillary and mandibular incisors (1.1, 1.NA and 1.NB) differed statistically between patients with anterior open bite of the individuals that presented normal overbite, which suggests that the anterior open bite may be of dental origin.

scholarly journals Cephalometric evaluation of adult anterior open bite non-extraction treatment with Invisalign

2017 ◽  
Vol 22 (5) ◽  
pp. 30-38 ◽  
Author(s):  
Shuka Moshiri ◽  
Eustáquio A. Araújo ◽  
Julie F. McCray ◽  
Guilherme Thiesen ◽  
Ki Beom Kim
Keyword(s):  
Open Bite ◽  
Therapeutic Modality ◽  
Occlusal Plane ◽  
Anterior Open Bite ◽  
Lower Incisor ◽  
Mandibular Plane ◽  
Lateral Cephalograms ◽  
Treatment Changes ◽  
Extraction Treatment ◽  
Lower Molar

ABSTRACT Objective: The purpose of this study was to evaluate, by means of cephalometric appraisal, the vertical effects of non-extraction treatment of adult anterior open bite with clear aligners (Invisalign system, Align Technology, Santa Clara, CA, USA). Methods: Lateral cephalograms of 30 adult patients with anterior open bite treated using Invisalign (22 females, 8 males; mean age at start of treatment: 28 years and 10 months; mean anterior open bite at start of treatment: 1.8 mm) were analyzed. Pre- and post-treatment cephalograms were traced to compare the following vertical measurements: SN to maxillary occlusal plane (SN-MxOP), SN to mandibular occlusal plane (SN-MnOP), mandibular plane to mandibular occlusal plane (MP-MnOP), SN to mandibular plane (SN-MP), SN to palatal plane (SN-PP), SN to gonion-gnathion plane (SN-GoGn), upper 1 tip to palatal plane (U1-PP), lower 1 tip to mandibular plane (L1-MP), mesiobuccal cusp of upper 6 to palatal plane (U6-PP), mesiobuccal cusp of lower 6 to mandibular plane (L6-MP), lower anterior facial height (LAFH), and overbite (OB). Paired t-tests and descriptive statistics were utilized to analyze the data and assess any significant changes resulting from treatment. Results: Statistically significant differences were found in overall treatment changes for SN-MxOP, SN-MnOP, MP-MnOP, SN-MP, SN-GoGn, L1-MP, L6-MP, LAFH, and OB. Conclusions: The Invisalign system is a viable therapeutic modality for non-extraction treatment of adult anterior mild open bites. Bite closure was mainly achieved by a combination of counterclockwise rotation of the mandibular plane, lower molar intrusion and lower incisor extrusion.

scholarly journals Efficiency of two protocols for maxillary molar intrusion with mini-implants

2016 ◽  
Vol 21 (3) ◽  
pp. 56-66 ◽  
Author(s):  
Juliana Volpato Curi Paccini ◽  
Flávio Augusto Cotrim-Ferreira ◽  
Flávio Vellini Ferreira ◽  
Karina Maria Salvatore de Freitas ◽  
Rodrigo Hermont Cançado ◽  
...  
Keyword(s):  
Mini Implants ◽  
Maxillary Molars ◽  
Molar Intrusion ◽  
Lateral Cephalograms ◽  
Maxillary Molar ◽  
Group 2 ◽  
Group 1

ABSTRACT Objective: The aim of this study was to compare the efficiency of two protocols for maxillary molar intrusion with two or three mini-implants. Methods: Twenty five maxillary first molars extruded for loss of their antagonists in adult subjects were selected. The sample was divided into two groups, according to the intrusion protocol with two or three mini-implants. Group 1 consisted of 15 molars that were intruded by two mini-implants. Group 2 consisted of 10 molars intruded by three mini-implants. Changes with treatment were analyzed in lateral cephalograms at the beginning and at the end of intrusion of maxillary molars. Results: Results showed that there was no difference in efficiency for the two intrusion protocols. It was concluded that extruded maxillary molars can be intruded with two or three mini-implants with similar efficiency.

scholarly journals Multiloop edgewise archwire treatment for a patient with a severe anterior open bite and amelogenesis imperfecta

2021 ◽  
Author(s):  
Ahmed I. Masoud ◽  
T. Peter Tsay
Keyword(s):  
Open Bite ◽  
Amelogenesis Imperfecta ◽  
Radiographic Examination ◽  
Orthodontic Appliances ◽  
Plane Angle ◽  
Anterior Open Bite ◽  
Posterior Teeth ◽  
Anterior Teeth ◽  
Mandibular Plane ◽  
Mandibular Plane Angle

ABSTRACT Amelogenesis imperfecta is a rare hereditary disorder that affects dental enamel and is often associated with an anterior open bite. Orthodontic treatment of a 16-year-old female patient with hypocalcified amelogenesis imperfecta and a 9-mm anterior open bite was presented. Radiographic examination revealed a steep mandibular plane angle, an increased lower face height, a Class II skeletal pattern, and a convex profile. Additionally, the patient had stainless steel crowns on all upper and lower posterior teeth and composite veneers on the upper anterior teeth. The patient was treated nonsurgically using a multiloop edgewise archwire (MEAW). MEAW mechanics allowed for successful correction of the anterior open bite, with significant reduction in the mandibular plane angle and improvement in the patient's profile. No fixed retainers were used, results remained stable 78 months after removal of orthodontic appliances. MEAW mechanics should be considered for patients with large anterior open bites, although this technique requires excellent patient compliance.

scholarly journals Intrusion of upper molars with mini-implants for open bite correction is effective? A systematic review

2018 ◽  
Vol 21 (4) ◽  
pp. 461
Author(s):  
Ana de Lourdes Sá De Lira ◽  
Gustavo Pinho Nascimento ◽  
Tennessee Felipe Costa Freitas
Keyword(s):  
Systematic Review ◽  
Scientific Evidence ◽  
Evaluation Process ◽  
Risk Of Bias ◽  
Open Bite ◽  
Inclusion Criteria ◽  
Mini Implants ◽  
Molar Intrusion ◽  
Upper Molar ◽  
Implant Treatment

<pre><strong>Introduction:</strong> The open bite is a malocclusion defined by the absence of a positive vertical overlap of the upper incisors over the lower ones. It is believed that the correction of this malocclusion with mini-implants is as effective as another technique. <strong>Objective:</strong> To verify by scientific evidence the effectiveness of upper molar intrusion with mini-implants for correction of open bite. <strong>Material and Methods:</strong> This systematic review was conducted according to the PRISMA guidelines. Cochrane Handbook for Systematic Reviews of Interventions (version 5.3) was used to assess the methodological quality and risk of bias of the included studies. <strong>Results:</strong> During the selection and evaluation process, 795 of the 1297 papers were eligible for research in their titles and abstracts. Repeated articles were removed and as a result, 21 articles were retrieved and read completely. Those who did not meet the inclusion criteria were excluded, resulting in only 6 articles that were included. <strong>Conclusion:</strong> The intrusion of the upper molars with the use of mini-implants as a skeletal anchor is effective for open bite correction. When the technique of upper molar intrusion with mini-implants was compared with the technique of posterior high pull and incisor extrusion, the first one was more effective for the correction of open bite. The recurrence of molar intrusion does not invalidate mini-implant treatment for open bite correction because the benefits achieved outweigh the small dental relapse.</pre><pre><strong>Keywords</strong></pre><pre> Orthodontics, corrective; Tooth intrusion; Open bite.</pre>

scholarly journals Nonsurgical treatment of a hyperdivergent skeletal Class III patient with mini-screw–assisted mandibular dentition distalization and flattening of the occlusal plane

2021 ◽  
Author(s):  
Yiruo He ◽  
Yangyang Wang ◽  
Xinghai Wang ◽  
Jiangyue Wang ◽  
Ding Bai ◽  
...  
Keyword(s):  
Treatment Plan ◽  
Open Bite ◽  
Nonsurgical Treatment ◽  
Occlusal Plane ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Anterior Open Bite ◽  
Skeletal Class ◽  
Posterior Crossbite ◽  
Mandibular Plane

ABSTRACT Treatment of hyperdivergent skeletal Class III malocclusion is challenging for orthodontists, and orthognathic-orthodontic treatment is usually required. This report presents the successful nonsurgical treatment of a 20-year-old man who had a skeletal Class III malocclusion with anterior open bite, anterior and posterior crossbite, hyperdivergent growth pattern, steep occlusal plane, early loss of three first molars, and an uncommon convex profile with a retruded chin. An orthodontic camouflage treatment plan was chosen based on the etiology and the patient's complaints. Tooth #37 was extracted. Miniscrews were used for uprighting and intruding of the lower molars, distalization of the lower dentition, and flattening of the occlusal plane. After 34 months of active treatment, Class I relationships, proper anterior overjet and overbite, flat occlusal plane, and an esthetic facial profile were achieved. The results demonstrated that the biomechanics involved in the nonsurgical treatment assisted with miniscrews to distalize the mandibular dentition and flatten the occlusal plane while keeping the mandibular plane stable was effective for treating this hyperdivergent skeletal Class III patient with a convex profile and anterior open bite.

Sign in / Sign up

Export Citation Format

Share Document