Intrusion of the maxillary posterior teeth with a single buccal mini-implant positioned bilaterally in young adults with a tendency towards hyperdivergence: A clinical study

Background: Skeletal anchorage systems have been used for intrusion of the posterior teeth with satisfactory results. To achieve this, mini-implants are placed at anatomically challenging sites such as the palate or require several mini-implants to produce the desired effect. Objective: To determine the magnitude of intrusion of the maxillary posterior teeth achieved on a continuous arch wire using a single buccal mini-implant placed bilaterally in young patients with a tendency towards hyperdivergence and to evaluate its influence on the skeletal, dental and soft-tissue structures. Methods: A total of 17 patients with proclination of the anterior teeth, tendency towards hyperdivergence and clockwise rotation of the mandible were selected. First premolars were extracted as part of treatment protocol. A 0.022-MBT bracket prescription was used. Mini-implants were placed bilaterally on the buccal aspect at the mucogingival junction or slightly gingival to it between the maxillary second premolar and first permanent molar. A total of 200 g of intrusive force was placed from a continuous 0.019 × 0.025 inch stainless-steel arch wire to the mini-implant by means of an elastomeric thread on both sides. Lateral cephalograms and study models were taken before the start of intrusion and six months later. Parametric and non-parametric tests were done to assess treatment results. Results: Significant intrusion was observed in the maxillary molar and premolar region with tendency towards intrusion in the anterior region. There was significant decrease in lower anterior facial height (LAFH) with anti-clockwise mandibular rotation, decrease in facial proportion index and total facial height. No changes were observed in the transverse plane. Conclusion: Intrusion of the permanent maxillary molar can be achieved on a continuous arch wire with a single buccal mini-implant placed bilaterally with improvement in facial aesthetics, especially in the vertical plane. This method may be beneficial in patients with borderline vertical discrepancy treated with conventional friction mechanics during space closure after first premolar extractions.

Relationship of maxillary and mandibular effective base length, arch length and dental crowding in different vertical growth pattern

Objectives: The objectives of the study were to assess, measure, and correlate the maxillary and mandibular effective base length, arch length to the amount of dental crowding in different vertical growth pattern patients. Materials and Methods: Sample comprising 100 pre-treatment lateral cephalograms and study models (age group – 16–25 years) was randomly selected. The sample was divided into two groups, that is, clockwise (50) and anticlockwise (50) rotation based on the measurement of the gonial angle. The gonial angle and maxillary and mandibular effective lengths were measured on pre-treatment lateral cephalograms. Dental crowding and arch length were measured on the pre-treatment dental casts. Intergroup comparisons of effective base length, arch length, and crowding were performed with unpaired t-tests. Correlations between effective base length, arch length, and dental crowding were examined by means of Pearson’s correlation coefficient (P < 0.05). Results: Subjects with clockwise rotation significantly had more mandibular dental crowding and significantly decreased mandibular arch length compared to the anticlockwise group. An inverse correlation was found between maxillary and mandibular effective base length, arch length, and dental crowding while a positive correlation was found between maxillary and mandibular base length and arch length in both the groups. Conclusion: Clockwise rotation of the mandible along with skeletal and dental factors such as decreased effective base lengths and arch length, respectively, constitutes an important factor leading to dental crowding.

Oral Health Status of Children Living with Type 1 Diabetes Mellitus

Background: Diabetes is a well-known predisposing factor for oral diseases, so prevention in an early age is mandatory. Objective: To provide oral screening for children living with type 1 diabetes. We aimed to investigate the oral and general health indexes of T1DM children and compare these data to healthy siblings and controls. Methods: In this cross-sectional study, 120 DM patients and 78 siblings, thereafter 80 DM children and 95 controls, took part. A detailed questionnaire, panoramic radiographs, and lateral cephalograms were obtained in every orthodontic consultation. We used Pearson’s chi-square test for statistical analysis and compared the data of the study and control groups. Results: The oral health values of DM children were significantly better (DMF-T 0.83–1.3) than the national average (3.8–4.5). A total of 75% (n = 60) of the children needed orthodontic treatment for orthodontic or skeletal anomalies. The prevalence of skeletal anomalies was significantly (p < 0.05) higher among patients with diabetes mellitus (DM) than in the control group. The frequency of coeliac disease was significantly elevated compared to any literature data (1–3.5%) in the study (15%) and in the control sibling group (13%). Conclusions: Co-morbidities such as CD should get more attention as a prognostic factor for a future higher incidence of diabetes. T1DM children can be motivated and health-conscious patients with excellent oral hygiene and dental status. Orthodontic treatment can help eliminate the oral complications of DM. Special diabetes ambulances may help provide oral care for patients with DM.

Comparison of facemask therapy effects using skeletal and tooth-borne anchorage:

ABSTRACT Objectives To investigate long-term outcomes of dentoskeletal changes induced by facemask therapy using skeletal anchorage in Class III patients and compare them to those of conventional tooth-borne anchorage. Materials and Methods This retrospective study included 20 patients who received facemask (FM) therapy with miniplates as anchorage for maxillary protraction (Miniplate/FM group, 10.6 ± 1.1 years old [mean ± SD]) and 23 patients who were treated with facemask with rapid maxillary expander (RME/FM group, 10.0 ± 1.5 years old [mean ± SD]). Dentoskeletal changes were evaluated using lateral cephalograms at pretreatment (T1), after facemask therapy (T2), and at the post-pubertal stage (T3). Cephalometric changes were compared between groups and clinical success rates at T3 were evaluated. Results SNA and A to N perpendicular to FH increased significantly more in the Miniplate/FM group than in the RME/FM group when comparing short-term effects of facemask therapy (T1–T2). ANB, Wits appraisal, Angle of convexity, mandibular plane angle, and overjet decreased significantly more in the RME/FM group than in the Miniplate/FM group after facemask therapy (T2–T3). A more favorable intermaxillary relationship was observed in the Miniplate/FM group than in the RME/FM group in long-term observations (T1–T3). Clinical success rate at T3 was 95% in the Miniplate/FM group and 85% in the RME/FM group. Conclusions Facemask therapy with skeletal anchorage showed a greater advancement of the maxilla and more favorable stability for correction of Class III malocclusion in the long-term than conventional facemask therapy with tooth-borne anchorage.

Sagittal and Vertical Growth of the Maxillo–Mandibular Complex in Untreated Children: A Longitudinal Study on Lateral Cephalograms Derived from Cone Beam Computed Tomography

The aim of this longitudinal study was to evaluate the sagittal and vertical growth of the maxillo–mandibular complex in untreated children using orthogonal lateral cephalograms compressed from cone beam computed tomography (CBCT). Two sets of scans, on 12 males (mean 8.75 years at T1, and 11.52 years at T2) and 18 females (mean 9.09 years at T1, and 10.80 years at T2), were analyzed using Dolphin 3D imaging. The displacements of the landmarks and rotations of both jaws relative to the cranial base were measured using the cranial base, and the maxillary and mandibular core lines. From T1 to T2, relative to the cranial base, the nasion, orbitale, A-point, and B-point moved anteriorly and inferiorly. The porion moved posteriorly and inferiorly. The ANB and mandibular plane angle decreased. All but one subject had forward rotation in reference to the cranial base. The maxillary and mandibular superimpositions showed no sagittal change on the A-point and B-point. The U6 and U1 erupted at 0.94 and 1.01 mm/year (males) and 0.82 and 0.95 mm/year (females), respectively. The L6 and L1 erupted at 0.66 and 0.88 mm/year (males), and at 0.41 mm/year for both the L6 and the L1 (females), respectively.

Assessment of Skeletal Discrepancies by Determining R Angle in Lateral Cephalograms in Navi Mumbai Population

There is considerable interest in the area of orthodontics in malocclusions caused by vertical discrepancies because of their causes, diagnosis, treatment planning, and tendency to return after treatment. Hence, this study aimed to assess, evaluate and check reliability for vertical skeletal discrepancy by establishing a parameter ‘R angle’ in Navi Mumbai population. In this study, the lateral cephalometric radiographs of 135 orthodontic patients between the age group of 18-30 years of age were selected from the database of the Department of Orthodontics and Dentofacial Orthopaedics in D Y Patil University School of Dentistry, Navi Mumbai The study found that the R angle is clinically and statistically important when examining vertical skeletal discrepancies. So with the above results it is observed that R angle can be used to assess vertical skeletal discrepancy in Navi Mumbai population. Along with other parameters it can be important and valuable tool for orthodontist to determine skeletal discrepancies in vertical plane.

The Reliability of Two- and Three-Dimensional Cephalometric Measurements: A CBCT Study

Cephalometry is a standard diagnostic tool in orthodontic and orthognathic surgery fields. However, built-in magnification from the cephalometric machine produces double images from left- and right-side craniofacial structures on the film, which poses difficulty for accurate cephalometric tracing and measurements. The cone-beam computed tomography (CBCT) images not only allow three-dimensional (3D) analysis, but also enable the extraction of two-dimensional (2D) images without magnification. To evaluate the most reliable cephalometric analysis method, we extracted 2D lateral cephalometric images with and without magnification from twenty full-cranium CBCT datasets; images were extracted with magnification to mimic traditional lateral cephalograms. Cephalometric tracings were performed on the two types of extracted 2D lateral cephalograms and on the reconstructed 3D full cranium images by two examiners. The intra- and inter-examiner intraclass correlation coefficients (ICC) were compared between linear and angular parameters, as well as between CBCT datasets of adults and children. Our results showed that overall, tracing on 2D cephalometric images without magnification increased intra- and inter-examiner reliability, while 3D tracing reduced inter-examiner reliability. Angular parameters and children’s images had the lowest inter- and intra-examiner ICCs compared with adult samples and linear parameters. In summary, using lateral cephalograms extracted from CBCT without magnification for tracing/analysis increased reliability. Special attention is needed when analyzing young patients’ images and measuring angular parameters.

Craniomaxillofacial Changes Using High-Pull J-Hook Headgear and Mini-Implant Anchorage in Adolescents: A Structural Superimposition Method

Objective: The aim of this study was to compare the craniomaxillofacial changes when using high-pull J-hook headgear (HPJH) and mini-implants (MIs) as maxillary anchorage in adolescents. Study Design: 40 female adolescents with dentoalvolar protrusion were divided into 2 groups; the HPJH group (n=20) and the MI group (n=20). Lateral cephalograms taken before treatment (T0) and after anterior tooth retraction (T1) were superimposed on the stable structures and then craniomaxillofacial changes were evaluated. Results: The cranial base angle, SNB, and facial angle decreased in the HPJH group but increased in the MI group. ANB decreased more in the MI group than in the HPJH group. Mandibular plane angle increased in the HPJH group but decreased in the MI group. Facial height index increased in the MI group while it showed no change in the HPJH group. Mandibular true rotation occurred clockwise in the HPJH group and counterclockwise in the MI group. Maxillary central incisors were intruded and retracted more in the MI group than in the HPJH group. Maxillary first molars were extruded in the HPJH group and were intruded in the MI group. Maxillary first molars were protracted more in the HPJH group than in the MI group. Mandibular central incisors were retracted more in the HPJH group than the MI group. Mandibular first molars were extruded more in the MI group than in the HPJH group. Conclusion: More favorable craniomaxillofacial changes occurred in the MI group than in the HPJH group.

Comparison of dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne hybrid nonsurgical rapid maxillary expansions in adults: a retrospective observational study

Background Despite the gradual increase in the use of rapid maxillary expansion (RME), specifically RME with the aid of skeletal anchorage in adults, there have been no reports comparing dentoskeletal and soft tissue changes between nonsurgical tooth-borne and tooth-bone-borne RMEs in adults. This study aimed to analyse differences in dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne RMEs using a similar appliance design and the same expansion protocol in adult patients. Methods Twenty-one patients with tooth-borne expansion (a conventional expansion screw with two premolars and two molar bands for dental anchorage [T-RME]) and the same number of patients with tooth-bone-borne hybrid expansion (a conventional expansion screw with two premolar and two molar bands for dental anchorage and four mini-implants in the palate for skeletal anchorage [H-RME]) were included. Dentoskeletal and soft tissue variables at pretreatment (T1) and after expansion (T2) were measured using posteroanterior and lateral cephalograms and frontal photographs. The sex distribution of the two groups was analysed using the chi-square test, and the change after RME in each group was evaluated using the Wilcoxon signed-rank test. Differences in pretreatment age, expansion duration, post-expansion duration, and dentoskeletal and soft tissue changes after RME between the two groups were determined using the Mann–Whitney U test. Results There were no significant differences in the expansion protocol, pretreatment conditions, and sex distribution between the two groups. Despite similar degrees of dental expansion at the crown level between the two groups, H-RME induced increased skeletal and parallel expansion of the maxilla compared to T-RME. After expansion, H-RME demonstrated increased forward displacement of the maxilla without significant changes in the vertical dimension, while T-RME exhibited increased backward displacement of the mandible, increased vertical dimension, and decreased overbite. Both groups showed significant retroclination and extrusion of the maxillary incisors without significant intergroup differences. There were no significant soft tissue changes between the two groups. Conclusion This study suggests that using skeletal anchorage in RME may induce increased skeletal and parallel expansion of the maxilla without significant effects on the vertical dimension.