Abstract
Because of the uneven distribution of reinforcement particles in the molten pool during laser welding of SiCp/6061Al composites with powder, the effect of pulse frequency on the homogenization was studied in this paper. The pulse frequency of welding is changed and the macro morphology of the weld is studied by metallographic microscope. The particle uniformity of reinforcing phase and the porosity of molten pool at different frequencies were compared. The tensile strength of welded joints at different frequencies was tested by universal tensile machine. Finally, when the pulse frequency is 160Hz, the particle distribution of reinforcing phase is the most uniform and the tensile strength is the largest. The tensile strength reaches 267.06MPa, reaching 69.1% of the base metal. When the pulse frequency is 320Hz, the porosity of the weld is the lowest, reaching 1.75%.
Remote Laser Welding of Steel and Aluminum Alloys
