scholarly journals Indirect structure damage identification with the information of the vertical and rotational mode shapes

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
M. Ramezani ◽  
O. Bahar
Keyword(s):  
Damage Identification ◽  
Mode Shapes ◽  
Rotational Mode ◽  
Structure Damage

Review on Damage Identification and Diagnosis Research of Civil Engineering Structure

2014 ◽  
Vol 1006-1007 ◽  
pp. 34-37 ◽  
Author(s):  
Hong Ni ◽  
Ming Hui Li ◽  
Xi Zuo
Keyword(s):  
Structural Damage ◽  
Civil Engineering ◽  
Damage Identification ◽  
Engineering Structures ◽  
Engineering Structure ◽  
Civil Engineering Structure ◽  
Structure Damage ◽  
Development Direction ◽  
Structural Damage Identification ◽  
Civil Engineering Structures

This paper first describes the importance of structural damage identification and diagnosis in civil engineering, and introduces domestic and foreign status of damage identification and diagnosis methods, and on the basis of this, it also introduces all kinds of methods for damage identification and diagnosis of civil engineering structures, and finally puts forward the development direction of civil engineering structure damage identification and diagnosis.

Free Vibration of Damaged Beam Structure with a Notch Defect

2012 ◽  
Vol 226-228 ◽  
pp. 44-47 ◽  
Author(s):  
Jiang Yi Chen ◽  
Li Ge Fan ◽  
Dong Chen Qin
Keyword(s):  
Damage Identification ◽  
Delta Function ◽  
Theoretical Background ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Beam Structure ◽  
Arbitrary Boundary ◽  
Numerical Examples ◽  
Elastically Supported ◽  
Universal Expression

In this paper, we derive the universal expression of the modal parameters for a damaged beam under arbitrary boundary conditions. The delta function is first employed to describe a notch damage in the beam and consequently to derive the governing equation for the damaged beam. Second, by virtue of the perturbation method, the eigenvalues and the corresponding mode shapes are obtained for the damaged beam. Finally, numerical examples are given for an elastically supported beam. It is believed that the proposed approach could provide the necessary theoretical background for damage identification in beam structures.

Non-model-based damage identification of plates using measured mode shapes

2016 ◽  
Vol 16 (1) ◽  
pp. 3-23 ◽  
Author(s):  
Yongfeng Xu ◽  
Weidong Zhu
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Damage Index ◽  
Thickness Reduction ◽  
Aluminum Plate ◽  
Mode Shapes ◽  
Identification Method ◽  
Model Based

Mode shapes (MSs) have been extensively used to detect structural damage. This paper presents a new non-model-based damage identification method that uses measured MSs to identify damage in plates. A MS damage index (MSDI) is proposed to identify damage near regions with consistently high values of MSDIs associated with MSs of different modes. A MS of a pseudo-undamaged plate can be constructed for damage identification using a polynomial of a properly determined order that fits the corresponding MS of a damaged plate, if the associated undamaged plate is geometrically smooth and made of materials that have no stiffness and mass discontinuities. It is shown that comparing a MS of a damaged plate with that of a pseudo-undamaged plate is better for damage identification than with that of an undamaged plate. Effectiveness and robustness of the proposed method for identifying damage of different positions and areas are numerically investigated using different MSs; effects of crucial factors that determine effectiveness of the proposed method are also numerically investigated. Damage in the form of a machined thickness reduction area was introduced to an aluminum plate; it was successfully identified by the proposed method using measured MSs of the damaged plate.

scholarly journals Damage Identification by Using a Self-Synchronizing Multipoint Laser Doppler Vibrometer

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Chong Yang ◽  
Yu Fu ◽  
Jianmin Yuan ◽  
Min Guo ◽  
Keyu Yan ◽  
...  
Keyword(s):  
Mode Shape ◽  
Natural Frequencies ◽  
Damage Identification ◽  
Reference Beam ◽  
Laser Doppler Vibrometer ◽  
Laser Doppler ◽  
Vibration Measurement ◽  
Mode Shapes ◽  
Interference Signal ◽  
Short Period

The vibration-based damage identification method extracts the damage location and severity information from the change of modal properties, such as natural frequency and mode shape. Its performance and accuracy depends on the measurement precision. Laser Doppler vibrometer (LDV) provides a noncontact vibration measurement of high quality, but usually it can only do sampling on a single point. Scanning LDV is normally used to obtain the mode shape with a longer scanning time. In this paper, a damage detection technique is proposed using a self-synchronizing multipoint LDV. Multiple laser beams with various frequency shifts are projected on different points of the object, reflected and interfered with a common reference beam. The interference signal containing synchronized temporal vibration information of multiple spatial points is captured by a single photodetector and can be retrieved in a very short period. Experiments are conducted to measure the natural frequencies and mode shapes of pre- and postcrack cantilever beams. Mode shape curvature is calculated by numerical interpolation and windowed Fourier analysis. The results show that the artificial crack can be identified precisely from the change of natural frequencies and the difference of mode shape curvature squares.

Axisymmetric waves in compressible Newtonian liquids contained in rigid tubes: steady-periodic mode shapes and dispersion by the method of eigenvalleys

1973 ◽  
Vol 58 (3) ◽  
pp. 595-621 ◽  
Author(s):  
H. A. Scarton ◽  
W. T. Rouleau
Keyword(s):  
Boundary Layer ◽  
Acoustic Waves ◽  
Mode Shapes ◽  
Periodic Mode ◽  
Rotational Mode ◽  
High Frequencies ◽  
Wide Range ◽  
Propagating Waves ◽  
New Type ◽  
Newtonian Liquids

In this paper the first thirty-two axisymmetric modes for steady-periodic waves in viscous compressible liquids contained in rigid, impermeable, circular tubes are calculated. These results end long speculation over the effects of viscosity on guided acoustic waves. Sixteen of the modes belong to a family of rotation-dominated modes whose existence was previously unknown. The thirty-two modes were computed for a wide range of frequencies, viscosities and wave-lengths.The modes were found through the use of the method of eigenvalleys, which also led to the discovery of backward-propagating waves, an exact analytical expression for the zeroth rotational mode eigenvalue, definitive boundaries between low and intermediate frequencies and between intermediate and high frequencies, and a new type of boundary layer, called a dilatational boundary layer.

A Flexibility-Based Method for Structural Damage Identification Using Ambient Modal Data

2009 ◽  
Vol 24 (3) ◽  
pp. 153-159 ◽  
Author(s):  
Q. W. Yang
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Simulated Data ◽  
Least Square ◽  
Ambient Vibration ◽  
Mode Shapes ◽  
Vibration Modes ◽  
Sensitivity Equation ◽  
Structural Damage Identification ◽  
Normalization Factors

Structural damage identification using ambient vibration modes has become a very important research area in recent years. The main issue surrounding the use of ambient vibration modes is the mass normalization of the measured mode shapes. This paper presents a promising approach that extends the flexibility sensitivity technique to tackle the ambient vibration case. By introducing the mass normalization factors, manipulating the flexibility sensitivity equation, the unknown damage parameters and mass normalization factors can be computed simultaneously by the least-square technique. The effectiveness of the proposed method is illustrated using simulated data with measurement noise on three examples. It has been shown that the proposed procedure is simple to implement and may be useful for structural damage identification under ambient vibration case.

Damage Identification in Collocated Structural Systems Using Structural Markov Parameters

2013 ◽  
Author(s):  
Ramin Bighamian ◽  
Hamid Reza Mirdamadi ◽  
Jin-Oh Hahn
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Mode Shapes ◽  
Structural Systems ◽  
Structural System ◽  
Computationally Efficient ◽  
Markov Parameters ◽  
Novel Approach ◽  
Stiffness Matrices ◽  
Stiffness Characteristics

This paper presents a novel approach to damage identification in a class of collocated multi-input multi-output structural systems. In the proposed approach, damage is identified via the structural Markov parameters obtained from a system identification procedure, which is in turn exploited to localize and quantify damage by evaluating relative changes occurring in the mass and stiffness matrices associated with the structural system. To this aim, an explicit relationship between structural Markov parameters versus mass and stiffness matrices is developed. The main strengths of the proposed approach are that it is capable of quantitatively identifying the occurrence of multiple damages associated with both mass and stiffness characteristics in the structural system, and it is computationally efficient in that it is solely based on the structural Markov parameters but does not necessitate costly calculations related to natural frequencies and mode shapes, making it highly attractive for structural damage detection and health monitoring applications. Numerical examples are provided to demonstrate the validity and effectiveness of the proposed approach.

Sign in / Sign up

Export Citation Format

Share Document