scholarly journals DOSE ANALYZE OF BORON NEUTRON CAPTURE THERAPY (BNCT) AT SKIN CANCER MELANOMA USING MCNPX WITH NEUTRON SOURCE FROM THERMAL COLUMN OF KARTINI REACTOR

2017 ◽  
Vol 2 (3) ◽  
pp. 111
Author(s):  
Siti Rosidah ◽  
Yohannes Sardjono ◽  
Yosaphat Sumardi

<span>This research aims to determine the amount of radiation dose rate that can be accepted and the irradiation time that is required from Boron Neutron Capture Therapy (BNCT) cancer therapy to treat melanoma skin cancer. This research used the simulation program, MCNPX by defining the geometric dimensions of the tissue component, and describing the radiation source that were used. The outputs obtained from the MCNPX simulation were the neutron flux and the neutron scattering dose that came out from the collimator. The value of neutron flux was used to calculate the dose which comes from the interaction between the neutron and the material in the cancer tissue. Based on the results of the research, the dose rate to treat cancer tissue for boron is 10 μg/g of tumor, which translates to about 0.019241 Gy/second and  requires 25.98 minutes of irradiation time, 15 μg/g of tumor translates to 0.021854 Gy/second and requires 2.,87 minutes, 20 μg/g of tumor translates to 0.022902 Gy/second and requires 21,83 minutes, 25 μg/g of tumor translates to 0.0271275 Gy/second and requires 18.43 minutes, 30 μg/g of tumor translates to 0.0297658 Gy/second and requires 16.79 minutes, and 35 μg/g of tumor translates to 0.0343472 Gy/second and requires 14.55 minutes . The irradiation time needed for cancer tissue is shorter when boron concentration greater at the cancerous tissue.</span>

2018 ◽  
Vol 20 (1) ◽  
pp. 13
Author(s):  
Muhammad Mu’Alim ◽  
Yohannes Sardjono

Radiation shield at Boron Neutron Capture Therapy (BNCT) facility based on D-D Neutron Generator 2.4 MeV has been modified with pre-designed beam shaping assembly (BSA). Modeling includes the material and thickness used in the radiation shield. This radiation shield is expected to protect workers from radiation doses rate that is not exceed 20 mSv·year-1 of dose limit values. The selected materials are barite, paraffin, polyethylene and lead. Calculations were performed using the MCNPX program with tally F4 to determine the dose rate coming out of the radiation shield not exceeding the radiation dose rate of 10 μSv·hr-1. Design 3 was chosen as the recommended model of the four models that have been made. The 3rd shield design uses a 100 cm thickness of barite concrete as primamary layer to surrounding 100 cm x 100 cm x 166.4 cm room, and a 40 cm borated polyethylene surrounding the barite concrete material. Then 10 cm barite concrete and 10 cm of borated polyethylene are added to reduce the primary radiation straight from the BSA after leaving the main layer. The largest dose rate was 4.58 μSv·h-1 on cell 227 and average radiation dose rate 0.65 μSv·hr-1. The dose rates are lower than the lethal dose that is allowed by BAPETEN for radiation worker lethal dose.Keywords: Radiation shield, tally, radiation dose rate, BSA, BNCT PEMODELAN PERISAI RADIASI PADA FASILITAS BORON NEUTRON CAPTURE THERAPY BERBASIS GENERATOR NEUTRON D-D 2,4 MeV. Telah dimodelkan perisai radiasi pada fasilitas Boron Neutron Capture Therapy (BNCT) berbasis reaksi D-D pada Neutron Generator 2,4 MeV dengan Beam Shaping Assembly (BSA) yang telah didesain sebelumnya. Pemodelan ini dilakukan untuk memperoleh suatu desain perisai radiasi untuk fasilitas BNCT berbasis generator neutron 2,4 MeV. Pemodelan dilakukan dengan cara memvariasikan bahan dan ketebalan perisasi radiasi. Bahan yang dipilih adalah beton barit, parafin, polietilen terborasi dan timbal. Perhitungan dilakukan menggunakan program MCNPX dengan tally F4 untuk menentukan laju dosis yang keluar dari perisai radiasi. Desain periasi radiasi dinyatakan optimal jika radiasi yang dihasilkan diluar perisai radiasi tidak melebihi Nilai Batas Dosis (NBD) yang telah ditentukan oleh BAPETEN. Hasilnya, diperoleh suatu desain perisai radiasi menggunakan lapisan utama beton barit setebal 100 cm yang mengelilingi ruangan 100 cm x 100 cm x 166,4 cm dan polietilen terborasi 40 cm yang mengelilingi bahan beton barit. Kemudian ditambahkan beton barit 10 cm dan polietilen terborasi 10 cm untuk mengurangi radiasi primer yang lurus dari BSA setelah keluar dari lapisan utama. Laju dosis terbesar adalah 4,58 μSv·jam-1 pada sel 227 dan laju dosis rata-rata yang dihasilkan adalah sebesar 0,65 µSv·jam-1. Nilai laju dosis tersebut masih dibawah ambang batas NBD yang diperbolehkan oleh BAPETEN untuk pekerja radiasi.Kata kunci: Perisai radiasi, tally, laju dosis radiasi, BSA, BNCT


2016 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Yohannes Sardjono ◽  
Susilo Widodo ◽  
Irhas Irhas ◽  
Hilmi Tantawy

Boron Neutron Capture Therapy (BNCT) is an advanced form of radiotherapy technique that is potentially superior to all conventional techniques for cancer treatment, as it is targeted at killing individual cancerous cells with minimal damage to surrounding healthy cells. After decades of development, BNCT has reached clinical-trial stages in several countries, mainly for treating challenging cancers such as malignant brain tumors. The Indonesian consortium of BNCT already developed of the design BNCT for many cases of type cancers using many neutron sources. The main objective of the Indonesian consortium BNCT are the development of BNCT technology package which consists of a non nuclear reactor neutron source based on cyclotron and compact neutron generator technique, advanced boron-carrying pharmaceutical, and user-friendly treatment platform with automatic operation and feedback system as well as commercialization of the BNCT though franchised network of BNCT clinics worldwide. The Indonesian consortium BNCT will offering to participate in Boron carrier pharmaceuticals development and testing, development of cyclotron and compact neutron generators and provision of neutrons from the 100 kW Kartini Research Reactor to guide and to validate compact neutron generator development. Studies were carried out to design a collimator which results in epithermal neutron beam for Boron Neutron Capture Therapy (BNCT) at the Kartini Research Reactor by means of Monte Carlo N-Particle 5 (MCNP5) codes. Reactor within 100 kW of output thermal power was used as the neutron source. The design criteria were based on the IAEA’s recommendation. All materials used were varied in size, according to the value of mean free path for each. Monte Carlo simulations indicated that by using 5 cm thick of Ni as collimator wall, 60 cm thick of Al as moderator, 15 cm thick of 60Ni as filter, 1,5 cm thick of Bi as "-ray shielding, 3 cm thick of 6Li2CO3-polyethylene as beam delimiter, with 3-5 cm varied aperture size, epithermal neutron beam with minimum flux of 7,8 x 108 n.cm-2.s-1, maximum fast neutron and "-ray components of, respectively, 1,9 x 10-13 Gy.cm2.n-1 and 1,8 x 10-13 Gy.cm2.n-1, maximum thermal neutron per epithermal neutron ratio of 0,009, and beam minimum directionality of 0,72, could be produced. The beam did not fully pass the IAEA’s criteria, since the epithermal neutron flux was still below the recommended value, 1,0 x 109 n.cm-2.s-1. Nonetheless, it was still usable with epithermal neutron flux exceeded 5 x 108 n.cm-2.s-1. When this collimator was surrounded by 8 cm thick of graphite, the characteristics of the beam became better that it passed all IAEA’s criteria with epithermal neutron flux up to 1,7 x 109 n.cm-2.s-1. it is still feasible for BNCT in vivo experiment and study of many cases cancer type i.e.; liver and lung curcinoma. In this case, thermal neutron produced by model of Collimated Thermal Column Kartini Research Nuclear Reactor, Yogyakarta. Sodium boroncaptate (BSH) was used as in this research. BSH had effected in liver for radiation quality factor as 0.8 in health tissue and 2.5 in cancer tissue. Modelling organ and source used liver organ who contain of cancer tissue and research reactor. Variation of boron concentration was 20, 25, 30, 35, 40, 45, and 47 $g/g cancer. Output of MCNP calculation were neutron scattering dose, gamma ray dose and neutron flux from reactor. Given the advantages of low density owned by lungs, hence BNCT is a solid option that can be utilized to eradicate the cell cancer in lungs. Modelling organ and neutron source for lung carcinoma was used Compact Neutron Generator (CNG) by deuterium-tritium which was used is boronophenylalanine (BPA). The concentration of boron-10 compound was varied in the study; i.e. the variations were 20; 25; 30; 35; 40 and 45 μg.g-1 cancer tissues. Ideally, the primary dose which is solemnly expected to contribute in the therapy is alpha dose, but the secondary dose; i.e. neutron scattering dose, proton dose and gamma dose that are caused due to the interaction of thermal neutron with the spectra of tissue can not be simply omitted. Thus, the desired output of MCNPX; i.e. tally, were thermal and epithermal neutron flux, neutron and photon dose. The liver study variation of boron concentration result dose rate to every variation were0,042; 0,050; 0,058; 0,067; 0,074; 0,082; 0,085 Gy/sec. Irradiation time who need to every concentration were 1194,687 sec (19 min 54 sec);999,645 sec (16 min 39 sec); 858,746 sec (14 min 19 sec); 743,810 sec (12 min 24 sec); 675,156 sec (11 min 15 sec); 608,480 sec (10 min 8 sec); 585,807sec (9 min 45 sec). The lung carcinoma study variations of boron-10 concentration in tissue resulted in the dose rate of each variables respectively were 0.003145, 0.003657, 0.00359, 0.00385, 0.00438 and 0.00476 Gy.sec-1 . The irradiated time needed for therapy for each variables respectively were 375.34, 357.55, 287.58, 284.95, 237.84 and 219.84 minutes.


1981 ◽  
Vol 88 (1) ◽  
pp. 187 ◽  
Author(s):  
Susumu Harasawa ◽  
Atsushi Nakamoto ◽  
Yoshinori Hayakawa ◽  
Jun Egawa ◽  
Otohiko Aizawa ◽  
...  

1978 ◽  
Vol 75 (2) ◽  
pp. 243 ◽  
Author(s):  
Yoshinori Hayakawa ◽  
Susumu Harasawa ◽  
Atsushi Nakamoto ◽  
Kazuyoshi Amano ◽  
Hiroshi Hatanaka ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document