Dynamic properties on 99Mo adsorption and 99mTc elution with alumina columns

The Mo adsorption/99mTc elution properties of alumina used as Mo adsorbents are examined for the development of 99Mo/99mTc generators using 99Mo produced by the (n, γ) method. MoO3 is irradiated by the Kyoto University Research Reactor (KUR). The alumina columns are filled with three types of alumina made from different raw materials. In this paper, elongated tubes are used as columns and the properties under Mo dynamic adsorption conditions on alumina are compared with those under static adsorption conditions. The results obtained suggest that the 99Mo/99mTc ratio specified by the Minimum Requirements for Radiopharmaceuticals of Japan (MRRP) is greatly affected by the method of adsorbing Mo on alumina.

Development Of Scenarios For Controlling The Fuel Campaign Of The Ivg.1M Reactor With Leu-Fuel

The paper provides calculation of various campaign scenarios of the IVG.1M Research Reactor with LEU-fuel. The schemes of replacement and transfer of the fuel are suggested. Several options are considered that include a complete and partial replacement of spent nuclear fuel with fresh one, change in the reactor reactivity margin during campaign is calculated.

Assessment of Arsenic and Copper Pollution of the Benya Lagoon, Ghana By Neutron Activation Analysis

Heavy metal concentrations in some water bodies and the soil beneath these waters. These would have detrimental consequences on these water users and consumers of the fish in that water. Instrumental Neutron Activation Analysis technique using the Ghana Research Reactor-1 was employed to find out the concentrations of two heavy metals, Arsenic (As) and Copper (Cu) in the sediments, fishes, and water collected from the Benya Lagoon in the KEEA, Ghana. Cumulatively, Copper was found to be greater in concentration than Arsenic concerning the three parts of the ecology under study. On the other hand, Arsenic was more concentrated in the sediments than Copper, and Copper was more concentrated in the water and fish than Arsenic. Cumulatively, the level of contamination of Arsenic and Copper decreased in the order fish > sediment > water. Though Arsenic and Copper were found in elevated amounts in both water and fish which rendered the Lagoon water unsuitable for human use and the fish from the Lagoon unsafe for consumption, their concentrations in the sediment were found to have a low ecological risk index on the environment.

Identifikasi kebutuhan sarana-prasarana pemantauan radiasi nirawak dalam pengawasan radiasi reaktor riset di Indonesia

The facility’s licensee conducts environmental radiation monitoring in nuclear facilities to monitor radiation exposure in the facility’s vicinity. This activity is carried out also to monitor radiation release as a result of nuclear reactor operation. Aside from that, monitoring also works as a device to monitor radioactive release in a nuclear emergency. Therefore, the radiation monitoring system is crucial in nuclear utilization facilities to determine the number of radiation exposure to the surrounding environment. However, the existing stationary monitoring system has a risk of being unable to work if the system is down in case of natural disaster occurs. One way to mitigate this risk is to deploy an unmanned radiation monitoring system to monitor radiation exposure without putting personnel at risk. To define a suitable unmanned radiation monitoring system, identification of facilities and infrastructure required to design an unmanned radiation monitoring system for a research reactor in Indonesia is carried out. Facilities and infrastructure needed for unmanned radiation monitoring systems are unmanned aerial vehicles, radiation detector, control and communication module, navigation system, and software for the control system. These required facilities and infrastructure are then specified to determine the necessary specification for monitoring research reactor in Indonesia. The facilities’ required specifications are unmanned aerial vehicles with rotary-wing type, CdZnTe Detector, and GPS/GLONASS based navigation system. For infrastructure specification, control and communication module and software for the control system is not specified in how the system could meet the expected required performance rather than in detail. However, the system must provide and process measurement data in real-time to be presented in a radiation heatmap. Keywords: Identification, Radiation Monitoring, Unmanned

MARIA Reactor Irradiation Technology Capabilities towards Advanced Applications

The MARIA research reactor is designed and operated as a multipurpose nuclear installation, combining material testing, neutron beam experiments, and medical and industrial radionuclide production, including molybdenum-99 (99Mo). Recently, after fuel conversion to LEU and rejuvenation of the staff while maintaining their experience, MARIA has been used to respond to the increased interest of the scientific community in advanced nuclear power studies, both fission and fusion. In this work, we would like to introduce MARIA’ s capabilities in the irradiation technology field and how it can serve future nuclear research worldwide.