scholarly journals A study of characteristics of a new-type lead dioxide anode for electrowinning of zinc. Application of a new-type lead dioxide electrode to electrowinning(4th Report).

1990 ◽  
Vol 106 (4) ◽  
pp. 181-185 ◽  
Author(s):  
Akira FUKASAWA ◽  
Minoru UEDA ◽  
Kenji HAGIMORI ◽  
Takanori NUMASAKI ◽  
Kenichi KUSANO ◽  
...  
Keyword(s):  
Lead Dioxide ◽  
Lead Dioxide Electrode ◽  
Lead Dioxide Anode ◽  
New Type ◽  
Zinc Application

The Lead Dioxide Anode. II. The Kinetics and Participation of the Lead Dioxide Electrode in Electrochemical Oxidation Reactions in Sulfuric Acid

1989 ◽  
Vol 42 (9) ◽  
pp. 1527 ◽  
Author(s):  
TH Randle ◽  
AT Kuhn
Keyword(s):  
Sulfuric Acid ◽  
Electrochemical Oxidation ◽  
Maximum Rate ◽  
Lead Dioxide ◽  
Chemical Oxidation ◽  
Oxidation Reactions ◽  
Electrochemical Regeneration ◽  
Electrode Surfaces ◽  
Lead Dioxide Electrode ◽  
Lead Dioxide Anode

Lead dioxide is a strong oxidizer in sulfuric acid, consequently electrochemical oxidation of solution species at a lead dioxide anode may occur by a two-step, C-E process (chemical oxidation of solution species by PbO2 followed by electrochemical regeneration of the reduced lead dioxide surface). The maximum rate of each step has been determined in sulfuric acid for specified lead dioxide surfaces and compared with the rates observed for the electrochemical oxidation of cerium(III) and manganese(II) on the same electrode surfaces. While the rate of electrochemical oxidation of a partially reduced PbO2 surface may be sufficient to support the observed rates of CeIII and MnII oxidation at the lead dioxide anode, the rate of chemical reaction between PbO2 and the reducing species is not. Hence it is concluded that the lead dioxide electrode functions as a simple, 'inert' electron-transfer agent during the electrochemical oxidation of CellI and MnII in sulfuric acid. In general, it will most probably be the rate of the chemical step which determines the feasibility or otherwise of the C-E mechanism.

Preparation and Application of Lead Dioxide Electrode for Zinc Electrolysis

2013 ◽  
Vol 785-786 ◽  
pp. 1125-1129
Author(s):  
Xiao Yong Yang ◽  
Pei Xian Zhu ◽  
Yun Sen Si
Keyword(s):  
Surface Characterization ◽  
Catalytic Properties ◽  
Lead Dioxide ◽  
Manufacturing Cost ◽  
X Ray Diffraction ◽  
Simulation Test ◽  
X Ray ◽  
Zinc Smelter ◽  
Lead Dioxide Electrode

According to the process of anodic oxygen evolution in sulfate system for zinc electrolysis,Ti-base lead dioxide electrode can be prepared to use in this case.The surface characterization of the electrode was studied by Scanning electron microscopy(SEM) and X-ray diffraction(XRD).The electrode lifetime was tested in 1mol/L H2SO4solution at 60°C,and the electro-catalytic properties was examined by polarization curves.Then these samples was enlarged and simulation test was conducted at Mengzi marriage zinc smelter in Yunnan.The results show that the electro-catalytic properties is better and the electrodes lifetime is longer compared to the traditional lead electrode.Moreover,it has a significant effect in reducing energy consumption, manufacturing cost and improving the production and grade of zinc.

Lead Dioxide Anode for Commercial Use

1958 ◽  
Vol 105 (2) ◽  
pp. 100 ◽  
Author(s):  
J. C. Grigger ◽  
H. C. Miller ◽  
F. D. Loomis
Keyword(s):  
Lead Dioxide ◽  
Commercial Use ◽  
Lead Dioxide Anode
Sign in / Sign up

Export Citation Format

Share Document