scholarly journals Correlation between structural and electrical properties in highly porous (Y,Sr)(Ti,Nb)O3−δ SOFC anodes

2014 ◽  
Vol 32 (3) ◽  
pp. 331-340 ◽  
Author(s):  
T. Miruszewski ◽  
B. Trawiński ◽  
M. Gałka ◽  
J. Morzy ◽  
B. Bochentyn ◽  
...  
Keyword(s):  
Solid State ◽  
Electrical Properties ◽  
Structural Properties ◽  
Solid State Reaction ◽  
Hydrogen Atmosphere ◽  
Pore Former ◽  
Structural And Electrical Properties ◽  
Srtio3 Ceramics ◽  
Highly Porous ◽  
Co Doped

AbstractIn order to find a relationship between structural and electrical properties, niobium and yttrium doped SrTiO3 ceramics were prepared via solid-state reaction. The samples were sintered in hydrogen and air conditions. The samples were also fabricated with a pore-former to obtain highly porous specimens. The electrical properties of Nb-doped SrTiO3 samples and yttrium and niobium co-doped SrTiO3 were compared. The comparable electrical properties were observed and discussed according to previous literature reports. It was noticed that the synthesis in a reducing hydrogen atmosphere can increase the solubility of dopants. Moreover, the samples sintered in air presented lower conductivity level and worse structural properties than the samples sintered in hydrogen. The explanation of obtained results was also suggested and discussed.

Enhanced electrical properties of (Li,Ce) co-doped Sr(Na0.5Bi0.5)Bi4Ti5O18 high temperature piezoceramics

RSC Advances ◽  
2016 ◽  
Vol 6 (40) ◽  
pp. 33387-33392 ◽  
Author(s):  
Zhongran Yao ◽  
Ruiqing Chu ◽  
Zhijun Xu ◽  
Jigong Hao ◽  
Guorong Li
Keyword(s):  
High Temperature ◽  
Solid State ◽  
Electrical Properties ◽  
Solid State Reaction ◽  
Piezoelectric Ceramics ◽  
Solid State Reaction Method ◽  
Lead Free ◽  
Conventional Solid State Reaction ◽  
Reaction Method ◽  
Co Doped

Lead-free piezoelectric ceramics with the formula of Sr1−x(Li,Ce)x/2(Na0.5Bi0.5)Bi4Ti5O18 (LCSNBT-x, x = 0.0, 0.1, 0.2, 0.3, 0.4), were prepared by a conventional solid-state reaction method.

Fabrication and study the effect of the laser on the properties of the compound Tl2-xHgxBa2-ySryCa2Cu3O10+δ superconductor

2018 ◽  
pp. 168
Author(s):  
A. Kareem Dahash Ali ◽  
Nihad Ali Shafeek
Keyword(s):  
Transition Temperature ◽  
Solid State ◽  
Hydrostatic Pressure ◽  
Electrical Properties ◽  
Co2 Laser ◽  
Temperature Shift ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural And Electrical Properties

This study included the fabrication of    compound (Tl2-xHgxBa2-ySryCa2Cu3O10+δ) in a manner solid state and under hydrostatic pressure ( 8 ton/cm2) and temperature annealing(850°C), and determine the effect of the laser on the structural and electrical properties elements in the compound, and various concentrations of x where (x= 0.1,0.2,0.3 ). Observed by testing the XRD The best ratio of compensation for x is 0.2 as the value of a = b = 5.3899 (A °), c = 36.21 (A °) show that the installation of four-wheel-based type and that the best temperature shift is TC= 142 K  .When you shine a CO2 laser on the models in order to recognize the effect of the laser on these models showed the study of X-ray diffraction of these samples when preparing models with different concentrations of the values ​​of x, the best ratio of compensation is 0.2 which showed an increase in the values ​​of the dimensions of the unit cell a=b = 5.3929 (A °), c = 36.238 (A°). And the best transition temperature after shedding laser is TC=144 K. 

Synthesis of high-purity Li8ZrO6 powder by solid state reaction under hydrogen atmosphere

2016 ◽  
Vol 109-111 ◽  
pp. 1739-1743 ◽  
Author(s):  
Kiyoto Shin-mura ◽  
Yu Otani ◽  
Seiya Ogawa ◽  
Eiki Niwa ◽  
Takuya Hashimoto ◽  
...  
Keyword(s):  
Solid State ◽  
High Purity ◽  
Solid State Reaction ◽  
Hydrogen Atmosphere
Sign in / Sign up

Export Citation Format

Share Document