scholarly journals On Steady Two-dimensional Free-surface Flows with Spatially-varied Discharges

2019 ◽  
Vol 27 (3) ◽  
pp. 1-11
Author(s):  
Yebegaeshet T. Zerihun

Abstract In an open-channel, the transition of a flow from a subcritical to a supercritical state may occur as a result of a lateral inflow or outflow that produces a streamwise discharge variation. Apparently, such a transition cannot be modeled accurately by a conventional hydrostatic pressure approach. In this study, a depth-averaged model that accounts for the effects of a spatially-varied discharge and a non-hydrostatic pressure distribution was developed and applied to simulate the transcritical flow in a lateral-spillway channel and the subcritical flow in a main channel fitted with side weirs. The model results for the axial free-surface profile and variation of discharge in the main channel were compared with the results of a shallow-flow model and experimental data, thereby resulting in a closer match to the measurements than the shallow-flow model. Overall, the investigation results confirmed the efficiency and validity of the non-hydrostatic depth-averaged model in simulating the mean flow characteristics of the subcritical and transcritical free-surface flows with spatially increasing or decreasing discharges, thus demonstrating its potential to be used as a numerical tool in engineering practice.

2006 ◽  
Vol 50 (6) ◽  
pp. 649-672 ◽  
Author(s):  
J. W. Lee ◽  
M. D. Teubner ◽  
J. B. Nixon ◽  
P. M. Gill

2007 ◽  
Vol 9 (2) ◽  
pp. 81-94 ◽  
Author(s):  
V. Kutija ◽  
M. G. Murray

Over the past 40 years many hydraulic modelling systems for free-surface flows have been developed and successfully used in research and engineering practice. These systems were, in general, developed using sequential programming techniques while object-oriented programming approaches have only been used in the development of their visual parts. This paper outlines the approach used in the development of the NOAH modelling systems (Newcastle Object-oriented Advanced Hydroinformatics), developed entirely within the object-oriented paradigm. This novel approach has made NOAH modelling systems computationally highly efficient and yet easy to maintain and extend. NOAH 1D and NOAH 2D are designed to model free-surface flows in one and two dimensions, respectively. NOAH 1D is based on the full de Saint-Venant equations while NOAH 2D is based on the Shallow Water equations. Beside the basic ideas behind the development of NOAH modelling systems this paper also presents their main features and discusses general benefits of the application of the object-oriented programming approach in the development of numerical codes.


2014 ◽  
Vol 571-572 ◽  
pp. 682-687
Author(s):  
Qiao Rui Wu ◽  
Xiong Liang Yao

The objective of this study is to make some improvements to the original Moving Particle Semi-implicit method (MPS) for free surface flows. Compared to traditional mesh methods, MPS is feasible to simulate surface flows with large deformation, however, during the simulation; the pressure oscillation is quite violent, duo to misjudgment of surface particles as well as particles gathering together. To modify this problem, a new arc method is applied to judge free surface particles, and a collision model is introduced to avoid particles from gathering together. Hydrostatic pressure and classical dam break are investigated by original and improved MPS. The results verify that improved MPS method is more effective for free surface flows.


2011 ◽  
Vol 23 (2) ◽  
pp. 212-223 ◽  
Author(s):  
De-chao Hu ◽  
Bei-lin Fan ◽  
Guang-qian Wang ◽  
Hong-wu Zhang

Sadhana ◽  
2019 ◽  
Vol 44 (1) ◽  
Author(s):  
Krishna Chandran ◽  
Arun K Saha ◽  
Pranab K Mohapatra

Sign in / Sign up

Export Citation Format

Share Document