scholarly journals Androgenic activity of effluent from forty-five municipal waste water treatment plants in Victoria, Australia

Author(s):  
G. Allinson ◽  
M. Allinson ◽  
F. Shiraishi ◽  
S. A. Salzman ◽  
J. H. Myers ◽  
...  
1997 ◽  
Vol 35 (10) ◽  
pp. 73-78 ◽  
Author(s):  
Harry L. Dorussen ◽  
Wilfried B. A. Wassenberg

In many cases municipal waste water treatment plants receive considerable amounts of low polluted waste water like pretreated industrial waste water, polluted ground water etc. It is not known to what extent treatment of this type of waste water in a municipal waste water treatment plant is feasible with regard to environmental effects and costs. In this paper the effects of this type of waste water on the removal efficiencies of nitrogen, heavy metals and organic micropollutants have been described and costs have been given to prevent an increase of emission loads. For an estimation of the effects on the emission loads simulation models have been used. For an existing oxidation system with a relatively high amount of low polluted waste water simulation runs have been made for situations with and without low polluted waste water. On basis of the results of this case study a system has been developed for the assessment of the feasibility of treatment of low polluted waste water in a municipal waste water treatment plant.


2007 ◽  
Vol 2 (1) ◽  
Author(s):  
D.A. Danilovich ◽  
M.N. Kozlov ◽  
V.I. Sklyar ◽  
Yu.A. Nikolaev ◽  
N.M. Shchegolkova ◽  
...  

This work demonstrates a possibility of composting of municipal waste waters sludge (WWS) digested during 5-7 days, of the Kuryanovo waste water treatment plants (the city of Moscow) without the use of traditional organic additives – sawdust, peat, thatch. As a recycling filler (repeatedly used), enhancing the porosity of the composted mixture, ribbed polyethylene spheres (∅=8 cm) and wood chips (having dimension of 5-10 cm) were used. Composting was performed efficiently in both cases, however, the use of wood ships had technological and economical advantages. The process of composting was carried out during 2-4 weeks and was composed of classical phases of active heating (a rate of 0.2-0.3oC/h was obtained), maintaining of maximum temperature during 1-2 days, and cooling down to the ambient temperature. During the course of composting, a product was obtained, having attractive organoleptic properties, suitable for application in municipal laying-out of greenery.


Sign in / Sign up

Export Citation Format

Share Document