scholarly journals Non-destructive 3D geometric modeling of maize root-stubble in-situ via X-ray computed tomography

2020 ◽  
Vol 13 (3) ◽  
pp. 174-179
Author(s):  
Xu Zhao ◽  
◽  
Luyu Xing ◽  
Shifan Shen ◽  
Jiaming Liu ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Geometric Modeling ◽  
Maize Root ◽  
X Ray ◽  
X Ray Computed ◽  
Non Destructive

In-Situ Thermal Chamber 3D X-Ray Computed Tomography for Non-Destructive Detection of Submicron Via-Crack in Printed Circuit Boards

2020 ◽  
Author(s):  
Daechul Choi ◽  
Sooyoung Ji ◽  
Jaelim Choi ◽  
Miyang Kim ◽  
Eunju Yang ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Printed Circuit Boards ◽  
Fault Isolation ◽  
Circuit Boards ◽  
X Ray ◽  
Printed Circuit ◽  
Thermal Chamber ◽  
X Ray Computed ◽  
Non Destructive

Abstract In this paper, we demonstrate a case for non-destructive detection of submicron wide via-crack in printed circuit boards (PCBs) by using in-situ thermal chamber 3D x-ray computed tomography. The defect location is verified by a PFA (Physical Failure Analysis), and good agreement was made. This fault isolation method is proposed as a possible solution for identifying submicron cracks in PCB substrates during challenging investigations.

scholarly journals X-Ray Computed Tomography In Situ: An Opportunity for Museums and Restoration Laboratories

Heritage ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 2028-2038 ◽  
Author(s):  
Fauzia Albertin ◽  
Matteo Bettuzzi ◽  
Rosa Brancaccio ◽  
Maria Pia Morigi ◽  
Franco Casali
Keyword(s):  
Computed Tomography ◽  
Medium Size ◽  
Complex Objects ◽  
X Ray ◽  
Ct Analysis ◽  
X Ray Computed ◽  
The University ◽  
Non Destructive ◽  
Important Measurement

X-ray Computed Tomography (X-ray CT) is a sophisticated non-destructive imaging technique to investigate structures and materials of complex objects, and its application can answer many conservation and restoration questions. However, for Cultural Heritage investigations, medical CT scanners are not optimized for many case-studies: These instruments are designed for the human body, are not flexible and are difficult to use in situ. To overcome these limitations and to safely investigate works of art on site—in a restoration laboratory or in a museum—the X-ray Tomography Laboratory of the University of Bologna designed several CT systems. Here we present two of these facilities and the results of important measurement campaigns performed in situ. The first instrument, light and flexible, is designed to investigate medium-size objects with a resolution of a few tens of microns and was used for the CT analysis of several Japanese theater masks belonging to the collection of the “L. Pigorini” Museum (Rome). The second is designed to analyze larger objects, up to 200 cm and was used to investigate the collection of the so-called “Statue Vestite” (devotional dressed statues) of the Diocesan Museum of Massa.

scholarly journals Non-destructive characterization of additively manufactured components with x-ray computed tomography for part qualification: A study with laboratory and synchrotron x-rays

2021 ◽  
Vol 173 ◽  
pp. 110894
Author(s):  
Ercan Cakmak ◽  
Philip Bingham ◽  
Ross W. Cunningham ◽  
Anthony D. Rollett ◽  
Xianghui Xiao ◽  
...  
Keyword(s):  
Computed Tomography ◽  
X Rays ◽  
X Ray ◽  
X Ray Computed ◽  
Non Destructive ◽  
Non Destructive Characterization

X-RAY TOMOGRAPHY STUDIES OF PREHISTORIC CERAMIC ARTIFACTS

2014 ◽  
Vol 27 ◽  
pp. 1460135
Author(s):  
CARMEN PAVEL ◽  
FLORIN CONSTANTIN ◽  
COSMIN IOAN SUCIU ◽  
ROXANA BUGOI
Keyword(s):  
Computed Tomography ◽  
Cultural Heritage ◽  
Nuclear Physics ◽  
Structural Information ◽  
Ct Scans ◽  
Visual Examination ◽  
X Ray ◽  
X Ray Computed ◽  
Internal Configuration ◽  
Non Destructive

X-ray Computed Tomography (CT) is a powerful non-destructive technique that can yield interesting structural information not discernible through visual examination only. This paper presents the results of the CT scans of four objects belonging to the Romanian cultural heritage attributed to the Vinča, Cucuteni and Cruceni-Belegiš cultures. The study was performed with an X-ray tomographic device developed at the Department for Applied Nuclear Physics from Horia Hulubei National Institute for Nuclear Physics and Engineering in Măgurele, Romania. This apparatus was specially designed for archaeometric studies of low-Z artifacts: ceramic, wood, bone. The tomographic investigations revealed the internal configuration of the objects and provided information about the degree to which the previous manipulations affected the archaeological items. Based on the X-ray images resulting from the CT scans, hints about the techniques used in the manufacturing of the artifacts were obtained, as well as some indications useful for conservation/restoration purposes.

Sign in / Sign up

Export Citation Format

Share Document