Synthesis of Clustered Mn3O4 Nanoparticles through a Polymer Surfactant Mediated Route on Few-Layer Graphene Nanoplatelet Surface and its Application for Electrochemical Energy Storage: Lithium-ion Battery Anode

<p>Composites synthesized through the deposition of Mn₃O₄ on graphene, carbon nanotube and other carbon based materials have attracted much attention recently as potential electrode materials for different electrochemical applications such as pseudocapacitor; Lithium-ion battery; and catalysis. The primary reason Mn₃O₄ is grown on these substrates in spite of having high charge storage capacity as pseudocapacitor or Lithium-ion battery electrodes on its own is to enhance its electrical conductivity and/or to impart flexibility to the electrode, which is difficult for a fully metallic electrode. Higher electrical conductivity prolongs the cycle life of an electrode. In addition, the substrate contributes capacity and thus, enhances the overall energy density of an electrode. Mn₃O₄acts as a spacer and keeps graphene nanosheets separated when used as the substrate for capacitor electrode fabrication. This helps retain the high surface area of graphene nanosheets in the electrode which contributes additional capacitance. Mn₃O₄supported on graphene and other carbon substrates have recently been investigated as catalyst for methanol electro-oxidation in alkaline media; CO oxidation; and Oxygen reduction reaction (ORR). High surface area substrate uniformly distributes metal particles and prevents their agglomeration and dissolution during catalytic process. In addition, high electrical conductivity of graphene and carbon substrates enhances the electronic conductivity of Mn₃O₄ which is of importance for superior catalytic activity. Composite of Mn₃O₄ combined with carbon based substrate has also found non-electrochemical application such as the removal of Pb and Cu ions from aqueous solution because of their adsorptive behaviour.<b></b></p> <p>A myriad of procedures have been adopted for the synthesis of Mn₃O₄ on graphene or other carbonaceous substrates. All of these methods involve one or more of the following factors that complicate the process, such as: long synthesis time; high synthesis temperature; use of hazardous/toxic chemicals; multistep process and the requirement for sophisticated device or highly controlled environment. In fact, the complicacies associated with the synthesis of Mn₃O₄ have already been acknowledged and investigations have been directed at finding relatively simpler route such as the use of microwave technique. <b></b></p> <p>In this research, we report the synthesis of clusters of nearly octahedral shapedn Mn₃O₄ nanoparticles on few-layer graphene nanoplatalet (GnP) surface through a simple, wet-chemical, polyethyleneimine (PEI) mediated route. Few-layer graphene nanoplatelets are ultrathin particles of graphite prepared through proprietary intercalation and exfoliation method (XG Sciences, Inc., Lansing, MI, USA). The components involved in this synthesis method are manganese salts (KMnO₄ and MnSO₄.H₂O); water; PEI; and GnP as the substrate. The synthesis is carried out at a temperature of 80°C only and in open air. Highly crystallized Mn₃O₄ particles, as observed by X-Ray Diffraction (XRD), can be synthesized on GnP surface. It has also been observed that PEI acts as a reducing agent and as a capping agent on a continuous network of ribbon-like Birnessite-MnO₂ (IV) to produce a nearly octahedral shaped nanoparticles of Mn₃O₄ (II, III). It has already been mentioned that composites of Mn₃O₄ on graphene or other carbonaceous substrates find a myriad of applications. Thus, our research findings to synthesize GnP-Mn₃O₄ composite through a simple method should be of interest to a broad group of researchers. In this research, we have investigated the performance of this composite system as a Lithium-ion battery anode only. Our preliminary investigations reveal that the Mn₃O₄ composite synthesized through this method has just as much potential as the ones prepared through other alternative methods.</p>