EFFICIENCY AND INVESTMENT COMPARISON OF MONOCRYSTALLINE, POLYCRYSTALLINE, AND THIN FILM SOLAR PANEL TYPES AT KARABUK CONDITIONS

2017 ◽  
Vol 5 (3) ◽  
pp. 1 ◽  
Author(s):  
ÖZKAYMAK MEHMET ◽  
TABAK ABDÜLSAMED ◽  
CANAN AHMET ◽  
AKSAY MEHMET VOLKAN ◽  
İNANÇ ÖZGÜR ◽  
...  
Keyword(s):  
2019 ◽  
Vol 10 (02) ◽  
pp. 221-240
Author(s):  
Lingcheng Su ◽  
Jiajun Chen ◽  
Huada Daniel Ruan ◽  
Deborah Jayne Ballantine ◽  
Chiuhong Lee
Keyword(s):  

2011 ◽  
Vol 2011 (1) ◽  
pp. 000800-000804
Author(s):  
V. Ganescu ◽  
R. Shoaff ◽  
A. Pascu

An innovative low power (5W) consumer grade dual face PV solar panel assembly is presented in this research. The authors propose capitalizing indirectly on the shadowed face of a typical solar panel by augmenting the panel’s total active area of exposure (via the panel’s “back side” and respective “deflectors”) and aiming at an increase in the overall efficiency of the assembly. Standard environmental operating conditions were taken into account. No CPV were used. The resulting power output profile of this unit is presented in detail and compared with the output of a single sided “standard” solar PV module configuration. In addition, under similar design and operating environmental variables, the behavior of crystalline cells panels is intended to be contrasted with thin film panels’ as variants of this proposed solution.


2018 ◽  
Vol 67 ◽  
pp. 01019
Author(s):  
Andrew Bastian ◽  
Kresna Devara ◽  
Savira Ramadhanty ◽  
Tomy Abuzairi

Lighting is an essential thing in performing daily activities and without sufficient lighting we will be difficult to see clearly. The problem is when there is no electricity, for example when we go to a cave or a forest or when there is a natural disaster that shuts down all the electricity. A portable lamp that can be charged by exposing the lamp to sun light can be one of the solution to overcome this problem. Energy Harvesting is a concept where an energy is captured, stored, and used with several technologies including solar technology. Energy Harvesting technology is used in many applications such as calculator, electrical cars or day-to-day lighting This paper will discuss about an application of solar panel in portable LED lamp, that can be used in the night and can be charged during daytime with solar panel. The solar panel, LED, and the battery is integrated in one circuit so there will be more space convenient for user. Solar emergency lamp can be used to illuminate the pathway in mountain or caves and the lamp can float in the water because it case is inflatable. Rechargeable Li-ion Battery 3.7 V 500 mAh and 10 LED SMD is used in this lamp. The proposed design is using a transparent PVC for the case of the lamp. The lamp can be turned on approximately for 4 hours from fully charged battery with 10 LED lamp. The illumination of solar portable emergency lamp was measured using lux meter. The illumination average of the solar portable emergency lamp is 17.58 lux with a deviation of 7.3 lux with medium bright mode. The illumination average of the solar portable emergency lamp is 32.85 lux with a deviation of 12.4 lux for the full bright mode. The Illumination is measured in 50 cm below the solar portable emergency lamp with 9 measured point consisting of 3 rows and 3 columns.


Solar Energy ◽  
2021 ◽  
Vol 228 ◽  
pp. 516-522
Author(s):  
Hassan Basher ◽  
Muhammad Nubli Zulkifli ◽  
Mohd Khairil Rahmat ◽  
Muhammad Ghazali Abdul Rahman ◽  
Azman Jalar ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document