Development of the methods for determination of the active components in acidic and alkaline detergents

2021 ◽  
Vol 87 (2) ◽  
pp. 72-78
Author(s):  
Yu. V. Matveichuk ◽  
Yu. V. Shabeka ◽  
D. V. Stanishevskii
Keyword(s):  
Potassium Hydroxide ◽  
Ph Value ◽  
Active Components ◽  
Sample Weight ◽  
Complex Composition ◽  
Titration Procedure ◽  
Application Data ◽  
Trisodium Salt ◽  
Active Substances

The goal of the study is to develop methods for determination of the active components in acidic and alkaline detergents of complex composition. The objects of analysis are acidic (KATELON 202 – 208) and alkaline (KATELON 111 – 115) detergents of complex composition, which, in addition to easily detectable components (KOH and/or NaOH, HNO3, and H3PO4), contain weak organic acids (lactic, glycolic, acetic), including polybasic acids — aminotrimethylenephosphonic and diethylenetriaminepenta (methylenephosphonic) acids or salts — tetrasodium salt of glutamic acid N,N-diacetate, trisodium salt of methylglycine diacetic acid. An acid-base potentiometric titration was carried out for each of the listed objects and calculation formulas were derived to determine the concentration of the active substances (except for KATELON 115) in terms of nitric or phosphoric acid for acidic detergents or sodium or potassium hydroxide for alkaline detergents, respectively. A specific titration procedure (with indication of the sample weight, the pH value at the end of titration and corresponding calculation formula) is given in the application data sheet for each detergent along with the metrological characteristics of the methods.

Optimization of sol-gel based fibre-optic cholinesterase biosensor for the determination of organophosphorus pesticides

2000 ◽  
Vol 42 (7-8) ◽  
pp. 283-290 ◽  
Author(s):  
H.-C. Tsai ◽  
R.-A. Doong
Keyword(s):  
Fiber Optic ◽  
Ph Value ◽  
Rapid Determination ◽  
Organophosphorus Pesticides ◽  
Sol Gel ◽  
Neutral Red ◽  
Fluorescent Indicators ◽  
Low Leakage ◽  
Fiber Optic System

A sol-gel based fiber-optic biosensor with acetylcholinesterase as the biorecognition element has been developed for the rapid determination of organophosphorus pesticides. Nine fluorescent indicators, acridine, acridine orange, neutral red, DAPI, rhodamine B, fluorescein, umbelliferone, FITC on celite and FITC-dextran, have been examined to optimize the fiber-optic system. Results showed that acridine and FITCs were sensitive to the change of pH value caused by the enzyme-substrate catalysis reaction. However, the sensitivity of acridine was 260 times lower than that of FITCs. Higher toxicity of acridine to acetylcholinesterase than FITC was also observed. Moreover, the high-molecular-weight FITC-dextran showed low leakage rate when immobilizing using sol-gel technology, showing that the FITC-dextran was a suitable pH sensitive fluorescent indicator for the OPPs biosensor. The response of the fiber-optic biosensor to the substrate, acetylcholine, was highly reproducible (RSD=3.5%). A good linearity of acetylcholine in the range from 0.5 to 20 mM was also obtained (R2=0.98). Furthermore, a 30% inhibition can be achieved in 30min when 152 ppb paraoxon was added into the system. The results show the possibility for real-time determination of organophosphorus pesticides by using the biosensor developed in this study.

Simultaneous Determination of Six Components in Jingzhiguanxin Tablet by High-Performance Liquid Chromatography

2019 ◽  
Vol 15 (2) ◽  
pp. 130-137
Author(s):  
Hui Jiang ◽  
Lianhao Fu ◽  
Yu Wang ◽  
Shaozhi Wang ◽  
Xiaoxu Zhang ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Gradient Elution ◽  
Tanshinone Iia ◽  
Array Detector ◽  
Control Analysis ◽  
Active Components ◽  
Quality Control Analysis

Background: Jingzhiguanxin (JZGX) tablet, a traditional Chinese prescription, is commonly used for treating coronary heart disease and angina pectoris in the clinic. There are six active components (Danshensu (DSS), Protocatechuic aldehyde (PD), Paeoniflorin (PF), Ferulic acid (FA), Salvianolic acid B (Sal B) and Tanshinone IIA (TA)) in JZGX tablet. </P><P> Objective: In this paper, a simple and reliable method was used for simultaneous determining the six active components by high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). Methods: These six active components were separated on an Agilent Zorbax Eclipse XDB-C18 column (150 mmx4.6 mm, 5 µm) at 30 °C. Acetonitrile (A), methanol (B) and 0.5% H3PO4 aqueous solution (C) were used as mobile phase for gradient elution. The flow rate was 1 mL/min and the detection wavelengths were set at 280 nm for DSS, PD and Sal B, 230 nm for PF, 320 nm for FA and 270 nm for TA, respectively. Results: All of the six components showed good linearity regressions (r2≥0.9997) in the detected concentration range. The recovery rates and coefficient of variation (CV) for all analytes were 98.66%- 100.18% and 0.75%-1.89%, respectively. This method was successfully applied to simultaneously determine the six components in JZGX tablet from different batches and manufacturers. Conclusion: The validated method can be used in routine quality control analysis of JZGX tablet without any interference.

Sign in / Sign up

Export Citation Format

Share Document