scholarly journals Power System Transient Stability Enhancement by Tuning of SSSC and PSS Parameters Using PSO Technique

2018 ◽  
Vol 26 (5) ◽  
pp. 81-94 ◽  
Author(s):  
Hashim Dhahir Mohammed

In this paper, the tuning design of  SSSC and PSS was examined in increasing the damping of system oscillations and improve the stability of the power system during disturbances. The design problem of the SSSC controller and PSS is designed as problem of optimization and the technique uses (PSO) technique to find for optimal control parameters. By minimizing the objective function based on the speed deviation and time domain, which deliberately deviates at the oscillation angle of the alternator rotor to improve performance of transient stability of the system. The proposed controllers are tested on the system of weak bonding ability exposed to severe disturbance. Nonlinear simulation results are presented to demonstrate the proposed controller's effectiveness and its ability to give efficient damping. It is also noted that the proposed controllers  of SSSC and PSS greatly improves the power system stability.

Author(s):  
Swathi Kommamuri ◽  
P. Sureshbabu

Power system stability improvement by a coordinate Design ofThyristor Controlled Series Compensator (TCSC) controller is addressed in this paper.Particle Swarm Optimization (PSO) technique is employed for optimization of the parameterconstrained nonlinear optimization problem implemented in a simulation environment. The proposed controllers are tested on a weakly connected power system. The non-linear simulation results are presented. The eigenvalue analysis and simulation results show the effectiveness and robustness of proposed controllers to improve the stability performance of power system by efficient damping of low frequency oscillations under various disturbances.


2013 ◽  
Vol 768 ◽  
pp. 313-316
Author(s):  
P. Sivakumar ◽  
C. Birindha

Distribution system is facing stability issues with integration of distributed generators and controllers. This proposed method presents the stability of renewable energy based distribution system with varying energy source considering intermittent nature of wind and solar energy using probabilistic approach. The system is supplied by conventional and distributed generating sources like PV and wind. Monte Carlo approach is used for predicting the wind and solar power uncertainties. Proposed work explains both small signal stability and transient stability enhancement of DG sourced power system with power system stabilizer and automatic voltage regulator .It is carried out in is 4 machine 10 bus system. The initial simulation has been carried out using MATLAB/SIMULINK.


2013 ◽  
Vol 805-806 ◽  
pp. 693-699
Author(s):  
Li Jie Ding ◽  
Hang Fan

This paper focuses on the estimation of the stability index of a power system after a severe disturbance. The description of the stability margin has always been a challenging issue but by introducing a ball-on-concave-surface system, the assessment of the power system stability is equivalent to the analysis to the motion state of the ball on concave. According to the continuous measurement of PMU, the parameter of the concave can be determined which is useful to judge the stability margin of the power system. Tests have been conducted on the systems with two generators and results show it can be accurate and reliable.


Author(s):  
Rashid H. AL-Rubayi ◽  
Luay G. Ibrahim

<span>During the last few decades, electrical power demand enlarged significantly whereas power production and transmission expansions have been brutally restricted because of restricted resources as well as ecological constraints. Consequently, many transmission lines have been profoundly loading, so the stability of power system became a Limiting factor for transferring electrical power. Therefore, maintaining a secure and stable operation of electric power networks is deemed an important and challenging issue. Transient stability of a power system has been gained considerable attention from researchers due to its importance. The FACTs devices that provide opportunities to control the power and damping oscillations are used. Therefore, this paper sheds light on the modified particle swarm optimization (M-PSO) algorithm is used such in the paper to discover the design optimal the Proportional Integral controller (PI-C) parameters that improve the stability the Multi-Machine Power System (MMPS) with Unified Power Flow Controller (UPFC). Performance the power system under event of fault is investigating by utilizes the proposed two strategies to simulate the operational characteristics of power system by the UPFC using: first, the conventional (PI-C) based on Particle Swarm Optimization (PI-C-PSO); secondly, (PI-C) based on modified Particle Swarm Optimization (PI-C-M-PSO) algorithm. The simulation results show the behavior of power system with and without UPFC, that the proposed (PI-C-M-PSO) technicality has enhanced response the system compared for other techniques, that since it gives undershoot and over-shoot previously existence minimized in the transitions, it has a ripple lower. Matlab package has been employed to implement this study. The simulation results show that the transient stability of the respective system enhanced considerably with this technique.</span>


The stability is an important guarantee for the safe and reliable operation of the power system, it is a decisive factor to limit the transmission distance and conveying capacity of the power system. Therefore, various measures must be taken to improve the system stability. The stability of the power system includes power angle stability, voltage stability and frequency stability. Among them, the power angle stability includes static stability and transient stability. Considering the importance of stability to the power system, the power system stability analysis methods and the measures to improve the power system stability is studied, so as to provide some useful reference for the safe and reliable operation of the power system. Generally, for multi-machine system transient stability becomes a major concern of wide power system due to load demand increasing day by day. In order to withstand disturbances with power quality issues requires evaluation of power system’s ability. There are many different kinds of methods for analysis of transient stability usually for multi-machine system. These methods include extended equal area criteria, time domain analysis and direct stability methods such as the transient energy function.


2020 ◽  
Vol 10 (24) ◽  
pp. 9034
Author(s):  
Junji Tamura ◽  
Atsushi Umemura ◽  
Rion Takahashi ◽  
Atsushi Sakahara ◽  
Fumihito Tosaka ◽  
...  

The penetration level of large-scale wind farms into power systems has been increasing significantly, and the frequency stability and transient stability of the power systems during and after a network fault can be negatively affected. This paper proposes a new control method to improve the stability of power systems that are composed of large wind farms, as well as usual synchronous generators. The new method is a coordinated controlling method between an adjustable-speed pumping generator (ASG) and a battery. The coordinated system is designed to improve power system stability during a disconnection in a fixed-rotor-speed wind turbine with a squirrel cage-type induction generator (FSWT-SCIG)-based wind farm due to a network fault, in which a battery first responds quickly to the system frequency deviation due to a grid fault and improves the frequency nadir, and then the ASG starts to supply compensatory power to recover the grid frequency to the rated frequency. The performance of the proposed system was confirmed through simulation studies on a power system model consisting of usual synchronous generators (SGs), an ASG, a battery, and an SCIG-based wind farm. Simulation results demonstrated that the proposed control system can enhance the stability of the power system effectively.


2021 ◽  
Vol 335 ◽  
pp. 02006
Author(s):  
Ahmad Adel Alsakati ◽  
Chockalingam Aravind Vaithilingam ◽  
Jamal Alnasseir

The use of wind energy is increased due to the high demand for sustainable energy. The penetration of wind energy in electrical networks might have several effects on load flow and power system stability. In this research, the transient stability of the IEEE 9-Bus system integrated with Doubly Fed Induction Generator (DFIG) is analyzed. Additionally, different penetration levels of a wind farm are considered. With a 5% penetration of wind energy, the maximum power angle of the synchronous generator is around 129 deg, which is quite similar to the existing system. In contrast, the power angle increases to 140 deg after adding more wind turbines with 15% wind farm penetration. Then, the system loses stability with a 25% penetration of wind energy. The results indicate that the high penetration of wind energy has a destabilizing impact on the studied network. Moreover, the location of the wind farm affects transient stability. This research intends to contribute towards assessing the stability of the power system integrated DFIG. Hence, this study will support the increase of using wind energy in power systems rather than conventional power plants and evaluate the stability to enable the reliability of alternative energy sources in the grid.


Author(s):  
Komsan Hongesombut ◽  
Naowarat Tephiruk

High damping ratio and fast settling time are very challenges for improving the stability performance in power system. In this paper, an energy capacitor system (ECS) is applied in a two-area multi-machine power system to provide the transient stability enhancement. The algorithm for designing the robust damping controller of the ECS is based on the loop shaping control. The results from the design are the control parameters of the ECS damping controller with the constraint that the size of the ECS must satisfy the criteria of damping consideration. From the simulation results, it can be found that the ECS can effectively enhance the damping of power system oscillations. Moreover, the combination of ECS and the existing power system stabilizers (PSSs) allows exceptional performance and more desirable size of ECS.


Sign in / Sign up

Export Citation Format

Share Document