scholarly journals Performance of Wheat in Five Soils of Different Textures under Freshwater and Wastewater Irrigation

2020 ◽  
Vol 2 (2) ◽  
pp. p89
Author(s):  
Md Abdul Mojid ◽  
Khadija A Mousumi ◽  
Tanvir Ahmed
Keyword(s):  
Water Quality ◽  
Grain Yield ◽  
Soil Texture ◽  
Irrigation Water ◽  
Biomass Yield ◽  
Water Productivity ◽  
Control Treatment ◽  
Irrigation Water Quality ◽  
Straw Yield ◽  
Wheat Cultivation

This study investigated the effects of five soils of different textures on wheat cultivation under irrigation with freshwater (FW) and municipal wastewater (WW). The experimental design was a split-plot with irrigation water quality as main factor and soil texture as sub-factor in three replications. These factors respectively comprised 2 and 5 treatments. Soil texture significantly (p£0.05) influenced plant height, leaf area index (LAI), spike length, number of grains per spike, above ground dry matter (ADM), grain yield, straw yield and biomass yield of wheat in most cases both under FW and WW irrigation. The harvest index (HI) of wheat responded significantly under FW irrigation only. Under FW, treatment T5 (silt loam) produced the highest grain yield (4.2 t ha–1) followed by T3 (loam-1) (3.1 t ha–1); the lowest yield (2.0 t ha–1) was in the control treatment, T1 (loamy sand). Under WW, treatment T2 (sandy loam) produced the highest grain yield (5.0 t ha–1) followed by T4 (loam-2) (4.5 t ha–1) both of which are statistically similar; the lowest yield (3.4 t ha–1) was in the control treatment. Treatments T2 and T4 provided the highest straw yield (5.6 t ha–1) and treatment T2 provided the highest biomass yield (10.6 t ha–1), both under WW; both T2 and T4 produced invariant biomass yields. Compared to other treatments, T2 and T4 gave statistically similar but significantly higher water productivity with respect to straw and grain yields. The lowest water productivity was in treatment T1 under both water qualities. The results of this study provided sound criteria in selecting suitable lands for wheat cultivation based on irrigation water quality, specifically in alluvial plains where soil texture is prone to high variations. Also, the observed facts of improved productivity of lower quality coarse-textured soils due to addition of easily available and inexpensive clay would provide guidance to bring unproductive sandy soils under production by clay amendments.

scholarly journals Assessment of ground water quality of lahar block, Bhind district in Madhya Pradesh

2015 ◽  
Vol 3 (2) ◽  
pp. 38 ◽  
Author(s):  
Shashi Kant ◽  
Y.V. Singh ◽  
Lokesh Kumar Jat ◽  
R. Meena ◽  
S.N. Singh
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Ground Water ◽  
Irrigation Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Madhya Pradesh ◽  
Irrigation Water Quality ◽  
Irrigation Water Quality Index

<p>In sustainable groundwater study, it is necessary to assess the quality of groundwater in terms of irrigation purposes. The present study attempts to assess the groundwater quality through Irrigation Water Quality Index (IWQI) in hard-rock aquifer system and sustainable water use in Lahar block, Bhind of district, Madhya Pradesh, India. The quality of ground water in major part of the study area is generally good. In order to understand the shallow groundwater quality, the water samples were collected from 40 tube wells irrigation water. The primary physical and chemical parameters like potential Hydrogen (pH), Total Dissolved Solids (TDS), calcium (Ca<sup>2+</sup>), magnesium (Mg<sup>2+</sup>), sodium (Na<sup>+</sup>), potassium (K<sup>+</sup>), bicarbonate (HCO<sub>3</sub><sup>-</sup>), carbonate (CO<sub>3</sub><sup>2-</sup>), chloride (Cl<sup>-</sup>), and nitrate (NO<sub>3</sub><sup>-</sup>) were analyzed for (irrigation water quality index ) IWQI. The secondary parameters of irrigation groundwater quality indices such as Sodium Adsorption Ratio (SAR), Sodium Soluble Percentage (SSP), Residual Sodium Carbonate (RSC), Permeability Index (PI), and Kellies Ratio (KR) were also derived from the primary parameter for irrigation water quality index (IWQI). The IWQI was classified into excellent to unfit condition of groundwater quality based on their Water Quality Index (WQI). The IWQI (82.5%+15.0%) indicate that slightly unsustainable to good quality of ground water. Due to this quality deterioration of shallow aquifer, an immediate attestation requires for sustainable development.</p>

scholarly journals Classification of groundwater suitability for irrigation purposes using a comprehensive approach based on the AHP and GIS techniques in North Kurdufan Province, Sudan

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Elsiddig Eldaw ◽  
Tao Huang ◽  
Adam Khalifa Mohamed ◽  
Yahaya Mahama
Keyword(s):  
Water Quality ◽  
Spatial Distribution ◽  
Groundwater Quality ◽  
Irrigation Water ◽  
Research Effort ◽  
Sodium Absorption ◽  
Irrigation Water Quality ◽  
Middle Income ◽  
Sodium Absorption Ratio ◽  
Deep Aquifers

AbstractDeterioration of groundwater quality due to drastic human interventions is rising at an alarming rate particularly in lower- and middle-income countries. Yet, limited research effort has been devoted to monitoring and ascertaining groundwater quality. The present study develops a comprehensive irrigation water quality index (IWQI) for rating water quality of shallow and deep aquifers in North Kurdufan province, Sudan. The new approach is developed to overcome the deficiencies of the existing irrigation indices and coming up with a unified decision for classifying water quality for irrigation purposes. Because of these indices like permeability index (PI), sodium absorption ratio (SAR), etc., depending on specific elements, entirely subjective, as well as the great variations in their results, particularly when classifying water quality. Thus, IWQI is created based on eight indices that are generally used to evaluate irrigation water quality, plus three physicochemical parameters have been proven an impact on water quality. The analytic hierarchy process (AHP) is applied to minimize the subjectivity at assign parameter weights under multiple criteria decision analysis tools (MCDA). The spatial distribution of IWQI agrees with the spatial distribution of the most parameters. The results of our approach reveal that the majority of samples are suitable for irrigation uses for both aquifers except few wells in the confined aquifer. Also, noted that there are very variations in the irrigation indices results for classifying water quality. The comparison result showed that the new index robust, fair calculations and has best classifying of water quality.

scholarly journals The Contribution of Groundwater to the Salinization of Reservoir-Based Irrigation Systems

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 512
Author(s):  
Michiele Gebrehiwet ◽  
Nata T. Tafesse ◽  
Solomon Habtu ◽  
Berhanu F. Alemaw ◽  
Kebabonye Laletsang ◽  
...  
Keyword(s):  
Water Quality ◽  
Cation Exchange ◽  
Irrigation Water ◽  
Groundwater Potential ◽  
Hydrochemical Facies ◽  
Command Area ◽  
Silicate Weathering ◽  
Irrigation Water Quality ◽  
Carbonate Minerals ◽  
Watershed Area

This study evaluates the cause of salinization in an irrigation scheme of 100 ha supplied from a reservoir. The scheme is located in Gumselasa catchment (28 km2), Tigray region, northern Ethiopia. The catchment is underlain by limestone–shale–marl intercalations with dolerite intrusion and some recent sediments. Water balance computation, hydrochemical analyses and irrigation water quality analyses methods were used in this investigation. Surface waters (river and reservoir) and groundwater samples were collected and analyzed. The water table in the irrigated land is ranging 0.2–2 m below the ground level. The majority of groundwater in the effective watershed area and the river and dam waters are fresh and alkaline whereas in the command area the groundwater is dominantly brackish and alkaline. The main hydrochemical facies in the groundwater in the effective watershed area are Ca-Na-SO4-HCO3, Ca-Na- HCO3-SO4, and Ca-Na-Mg-SO4-HCO3. The river and dam waters are Mg-Na-HCO3-SO4 and HCO3-SO4-Cl types, respectively. In the command area the main hydrochemical facies in the groundwater are Ca-Na-HCO3-SO4 and Ca-Na-Mg-SO4-HCO3. Irrigation water quality analyses revealed that salinity and toxicity hazards increase from the effective watershed to the irrigated land following the direction of the water flow. The results also showed that the analyzed waters for irrigation purpose had no sodicity hazard. The major composition controlling mechanisms in the groundwater chemistry was identified as the dissolution of carbonate minerals, silicate weathering, and cation exchange. One of the impacts of the construction of the dam in the hydrologic environment of the catchment is on its groundwater potential. The dam is indirectly recharging the aquifers and enhances the groundwater potential of the area. This increment of availability of groundwater enhanced dissolution of carbonate minerals (calcite, dolomite, and gypsum), silicate weathering and cation exchange processes, which are the main causes of salinity in the irrigated land. The rising of the brackish groundwater combined with insufficient leaching contributed to secondary salinization development in the irrigated land. Installation of surface and subsurface drainage systems and planting salt tolerant (salt loving) plants are recommended to minimize the risk of salinization and salt accumulation in the soils of the irrigated land.

A study of groundwater irrigation water quality in south-central Bangladesh: a geo-statistical model approach using GIS and multivariate statistics

2017 ◽  
Vol 37 (2) ◽  
pp. 193-214 ◽  
Author(s):  
M. Atikul Islam ◽  
Md. Mostafizur Rahman ◽  
Md. Bodrud-Doza ◽  
Md. Iftakharul Muhib ◽  
Mashura Shammi ◽  
...  
Keyword(s):  
Water Quality ◽  
Statistical Model ◽  
Multivariate Statistics ◽  
Irrigation Water ◽  
Irrigation Water Quality ◽  
South Central ◽  
Groundwater Irrigation ◽  
Model Approach
Sign in / Sign up

Export Citation Format

Share Document