For most of the newly built nuclear power plants, the computerized main control rooms (MCR) are adopted. The soft control, the typical feature of computerized Human-Interface System (HIS) in the computerized main control room and mediated by software rather than by direct physical connections, is comprised of safety and non-safety control interface which provides the operators with manual control for component-level, and allows both continuous control of plant process and discrete control of components in nuclear power plant. The safety soft control and information system (SSCIS) is used to give the safety commands to and check the immediate response of the safety process. This paper describes the application of the system design basis, functionality, communication, operation faceplate and system modes for SSCIS which is firstly introduced in CPR1000 nuclear power plant. The design criteria and basic design features of SSCIS is developed to be as the design basis of the design implementation. The ISG-04 ‘Highly-Integrated Control Rooms-Communications issues (HICRc)’ provides acceptable methods for addressing SSCIS communications in digital I&C system design. The NUREG0700 ‘Human-System Interface Design Review Guidelines’ is applied as reference for human factor engineering requirement in the SSCIS design. And the SSCIS design has also fully considered the possible customer usual practice.
Pengaruh Soft Control Dan hard Control Terhadap Hasil Temuan Auditor Internal Di Perusahaan Daerah Air Minum Se Provinsi Banten
