The purpose of this research was to fabricate the particle board from the coffee husk. The coffee husk from Chumphon province of Thailand was collected, prepared and separated into four groups such as outer husk, inner husk, the mixture of inner and outer husk and husk from the milling process. The coffee husk particle sheet was formed by the compression molding with the heater. Then the coffee husk particle sheets were the mechanical properties testing. The results showed the coffee husk particle sheet from milling process pass the Thai industrial standard (TIS.876/2547). However, the results of swelling and water absorption indicated that all the coffee husk sheet were not passed the TIS.876/2547. The effect of coffee husk particle size on mechanical properties was clarified. The coffee husk particle sheet from the particle size of 2, 4 and 6 mm was mechanical testing and follow TIS.876/2547. The coffee particle size of 2 mm showed the passing the standard. Moreover, the effect of isocyanate adhesive on mechanical properties was investigated. The weight percentage range of isocyanate adhesive on coffee husk from 7 to 13 %wt was carried out. The weight percentage of 9, 11 and 13 showed according to TIS.876/2547. From the experiment indicated that the coffee husk could be applied to the wood particle board industrial.
PREPARATION AND CHARACTERIZATION OF POLYMER CONCRETE USING PUMICE AGGREGATE AND COFFEE HUSK FIBER AS A FILLER
