Studying the Effect of Seed-layers of Zinc Oxide Nanostructured Thin Film for Liquefied Petroleum Gas Sensor Application

2020 ◽  
Vol 10 ◽  
pp. 41-49
Author(s):  
Gunanidhi Gyanwali

Gas sensors are devices that can convert the concentration of an analyte gas into an electronic signal. Zinc oxide (ZnO) is one of the most important n-type metal oxide semiconductor which has been utilized as gas sensor for many years. In this work, ZnO nanostructured films were synthesized by a hydrothermal growth from ZnO seeds and used as a liquefied petroleum gas (LPG) sensor. At first ZnO seed layers were deposited on glass substrates by using spin coating method, then ZnO nanostructured were grown on these substrates by using hydrothermal growth method. The effect of seed layers of ZnO nanostructured on its structural, optical, and electrical properties was studied. These nanostructures were characterized by scanning electron microscopy, X-ray diffraction, optical spectroscopy, and sheet resistance measurement unit. The sensing performances of the synthetic ZnO nanostructures were investigated for LPG. XRD showed that all the ZnO nanostructures were hexagonal crystal structure. ZnO nanostructured thin film showed high sensitivity towards LPG gas. The sensitivity of the film is observed to increase with increase in number of seed layers. The sensitivity of the film was investigated by measured change in sheet resistance under with LPG gas.

BIBECHANA ◽  
2018 ◽  
Vol 16 ◽  
pp. 145-153
Author(s):  
Guna Nidha Gnawali ◽  
Shankar P Shrestha ◽  
Khem N Poudyal ◽  
Indra B Karki ◽  
Ishwar Koirala

Gas sensors are devices that can convert the concentration of an analytic gas into an electronic signal. Zinc oxide (ZnO) is an important n-type metal oxide semiconductor which has been utilized as gas sensor for several decades. In this work, ZnO nanostructured films were synthesized by a hydrothermal route from ZnO seeds and used as a liquefied petroleum gas (LPG) sensor. At first ZnO seed layers were deposited on glass substrates by using spin coating method, then ZnO nanostructured were grown on these substrates by using hydrothermal growth method for different time duration. The effect of growth time and seed layers of ZnO nanostructured on its structural, optical, and electrical properties was studied. These nanostructures were characterized by X-ray diffraction, scanning electron microscopy, optical spectroscopy, and four probes sheet resistance measurement unit. The sensing performances of the synthetic ZnO nanostructures were investigated for LPG.XRD showed that all the ZnO nanostructures were hexagonal crystal structure with preferential orientation. SEM reviled that the size of nanostructure increased with increase in growth time. Band gap and sheet resistance for ZnO nanostructured thin film decreased with increase in growth time. ZnO nanostructured thin film showed high sensitivity towards LPG gas. The sensitivity of the film is observed to increase with increase in no of seed layers as well as growth time. The dependence of the LPG sensing properties on the different growth time of ZnO nanostructured was investigated. The sensing performances of the film were investigated by measured change in sheet resistance under expose to LPG gas. BIBECHANA 16 (2019) 145-153


2011 ◽  
Vol 335-336 ◽  
pp. 478-482 ◽  
Author(s):  
Xin Liang Cao

For different gas sensing, the preparation of Zinc Oxide (ZnO) thin film gas sensor has its particularity. In this paper, three kinds of preparation methods, fitting for CO and methane and CO2 sensing, are introduced. Moreover, the sensitivity is respectively analyzed as gas sensors. The reference is provided for the preparation and applications of ZnO thin film gas sensor.


2011 ◽  
Vol 312-315 ◽  
pp. 1126-1131
Author(s):  
Mohamad Hafiz Mamat ◽  
Zuraida Khusaimi ◽  
Mohamad Mahmood Rusop

Zinc oxide (ZnO) nanostructures with different kind of morphologies were synthesized on glass substrates via the hydrothermal aqueous chemical growth method utilizing c-axis oriented ZnO thin film as seeded catalyst. By preparing ZnO thin film at different molar concentrations between 0.2~1.0 M, oval shaped ZnO nanostructures mixed with ZnO nanowires and rod shaped ZnO nanostructures mixed with ZnO nanowires were produced after immersion process into 0.0002 M zinc nitrate solution for 24 hour. The XRD spectra show synthesized ZnO nanostructures were ZnO hexagonal wurtzite crystalline. The photoluminescence (PL) measurement indicates the luminescences of the samples were depending on the shapes of ZnO nanostructure.


AIP Advances ◽  
2016 ◽  
Vol 6 (12) ◽  
pp. 125306 ◽  
Author(s):  
Gaofeng Zheng ◽  
Ping Zhu ◽  
Lingling Sun ◽  
Jiaxin Jiang ◽  
Juan Liu ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document