ALCOA 6061

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Data Sheet ◽  
Alloy 6061

Abstract Alloy 6061 is one of the most widely used alloys in the 6000 Series. This data sheet revision adds standard tempers and many of the Alcoa special tempers, as well as properties for extrusions and shapes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-281. Producer or source: Alcoa Engineered Products. Originally published May 1987, revised January 2006.

KAISER ALUMINUM ALLOY 6033

Alloy Digest ◽  
2003 ◽  
Vol 52 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6033 has improved machinability over alloy 6061 with an addition of bismuth. The alloy also has a good anodizing response and higher strength than alloy 6061. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-386. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALUMINUM ALLOY 6061

Alloy Digest ◽  
1999 ◽  
Vol 48 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Aluminum Alloy 6061 ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6061 has excellent joining characteristics and good acceptance of coatings (anodizing response). It is used in applications where weldability and corrosion resistance are needed. The alloy is typically used in fittings, brake pistons, computer parts, couplings, and valves. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-360. Producer or source: Tennalum, A Division of Kaiser Aluminum. Originally published March 1999, corrected October 1999.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

MAGNESIUM AZ91B

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Die Casting ◽  
Casting Alloy ◽  
Casting Industry ◽  
Magnesium Die Casting

Abstract MAGNESIUM AZ91B is a standard magnesium die casting alloy patterned for the needs of the commercial casting industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and surface treatment. Filing Code: Mg-36. Producer or source: Apex Smelting Company.

ALCOA 1XXX SERIES

Alloy Digest ◽  
2005 ◽  
Vol 54 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Purity ◽  
High Conductivity ◽  
Good Corrosion Resistance

Abstract Aluminum 1xxx series alloys are nonhardenable by heat treatment. They have high purity, high conductivity, and good corrosion resistance and are easily formed. This datasheet provides information on composition, physical properties, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-395. Producer or source: Alcoa Engineered Products.

ALUMINUM 852.0

Alloy Digest ◽  
1983 ◽  
Vol 32 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Permanent Mold ◽  
Temperature Performance

Abstract ALUMINUM 852.0 contains higher concentrations of copper and nickel than either Aluminum 850.0 or Aluminum 851.0 alloy. The higher copper and nickel percentages and an addition of magnesium give Aluminum 852.0 higher strength and make it suitable for bearing applications requiring improved resistance to higher operating stresses (loads). Aluminum 852.0 is used for the production of castings by the sand and permanent-mold processes. It is normally supplied and used in the T5 temper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-248. Producer or source: Various aluminum companies.

COPPER ALLOY No. C43400

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Ductility ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

KAISER ALUMINUM ALLOY 6262

Alloy Digest ◽  
1999 ◽  
Vol 48 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Automotive Parts

Abstract Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

MAGNESIUM TA54A

Alloy Digest ◽  
1960 ◽  
Vol 9 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Aluminum Company ◽  
Hammer Forging

Abstract MAGNESIUM ALLOY-TA54A is a general purpose hammer-forging alloy having intermediate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-44. Producer or source: Aluminum Company of America.

Sign in / Sign up

Export Citation Format

Share Document