ASARCOLO 158-190 and 217-440

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Eutectic Alloys ◽  
Melting Range ◽  
Machine Shop

Abstract ASARCOLO 158-190 and 217-440 are non-eutectic alloys that can be melted easily. Each range indicates the range through which the alloy melts; thus ASARCOLO 158-190 is a non-eutectic alloy that has a melting range from 158 F to 190 F and ASARCOLO 217-440 is another non-eutectic alloy that melts in the range 217 F to 440 F. These alloys are used widely to aid foundry and machine shop practices, for anchoring components, to spot fixtures for awkward shapes, and for soldering. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Bi-2. Producer or source: Federated Metals Corporation, ASARCO Inc..

CERROCAST Alloy

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Melting Range ◽  
Spray Painting ◽  
Metal Products ◽  
Temperature Work

Abstract CERROCAST Alloy is a non-eutectic alloy with a melting range from 281 F to 338 F. It provides manufacturing engineers with an easily castable material that is ready for use soon after it freezes; moreover, it can be recovered readily and recycled into new uses any number of times. Cerrocast alloy is used widely for spray molding techniques, for sealing and soldering in low-temperature work, for proof casting in foundries and for masks in spray painting and electroplating. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Sn-9. Producer or source: Cerro Metal Products.

OSTALLOY 281-338

Alloy Digest ◽  
1981 ◽  
Vol 30 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Melting Range ◽  
Wax Pattern

Abstract OSTALLOY 281-338 is a non-eutectic alloy with a melting range of 281-338 F (138-170 C). It provides scientists, engineers, manufacturers and technicians with an easily castable material that is ready for use soon after it freezes. It has the advantage that it can be recovered easily and used again many times. Among its many uses are proof castings in foundries, lost-wax pattern dies, holding or anchoring parts for machining and fusible mandrels for electroforming. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Sn-11. Producer or source: Arconium Corporation of America, A.J Oster Company.

ASARCOLO 281-338

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Melting Range

Abstract ASARCOLO 281-338 is a non-eutectic alloy that can be melted easily. Its range indicates the temperature through which it melts; thus it has a melting range from 281 F to 338 F. It is used widely in foundries for proof casting. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Sn-6. Producer or source: Federated Metals Corporation, ASARCO Inc..

ASARCOLO 158 and 255

Alloy Digest ◽  
1977 ◽  
Vol 26 (11) ◽  
Keyword(s):  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Eutectic Alloys ◽  
Machine Shop ◽  
Thin Sections ◽  
Wide Range

Abstract ASARCOLO 158 and 255 are eutectic alloys that are easily melted. Each number indicates a eutectic with a single melting point; thus ASARCOLO 158 has a melting point of 158 F and ASARCOLO 255 melts at 255 F. These alloys have a wide range of uses in aiding foundry and machine-shop practice, for bending thin sections, anchoring components, spotting fixtures, transferring heat, soldering and sealing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Bi-1. Producer or source: Federated Metals Corporation, ASARCO Inc..

INDALLOY 136

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating

Abstract INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.

INDALLOY 255

Alloy Digest ◽  
1980 ◽  
Vol 29 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Dental Models ◽  
Scientists And Engineers

Abstract INDALLOY No. 255 is a fusible alloy that melts at 255 F. This low-melting eutectic alloy provides scientists and engineers with an easily castable material that is ready for use as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Among its many applications are proof-casting, liquid seals for heat-treating furnaces, non-shrinking patterns and dental models. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-18. Producer or source: Indium Corporation of America.

CERROTRU Alloy

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Melting Point ◽  
Liquid Metal ◽  
Physical Properties ◽  
Tensile Properties ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Tube Bending ◽  
Metal Products

Abstract CERROTRU Alloy is a bismuth-base eutectic alloy that melts at 281 F (138 C). It has the highest melting point of the bismuth-base alloys commonly used in industry. It provides production engineers with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Cerrotru alloy has many uses including anchoring, molds for plastics, filler for tube bending and liquid metal in heat treating. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-15. Producer or source: Cerro Metal Products.

CERROLOW-136 Alloy

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Metal Products

Abstract CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.

CERROLOW-117 Alloy

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Dental Models ◽  
Metal Products

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.

INDALLOY 117

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Melting Temperature ◽  
Eutectic Alloy ◽  
Heat Treating ◽  
Safety Devices

Abstract INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.

Sign in / Sign up

Export Citation Format

Share Document